The sound's wheel is not working in my laptop

Hello:
I just installed Arch.
I followed the Beginner's Guide. Installed ALSA, etc.
I downloaded Amarok, but when I'm listening to music, and I scroll the wheel that regulates the music in my laptop, it does not work.
I must do any additional thing?
Thank you very much.

gromlok wrote:
Hello, I'm using XFCE, and In the Mixer opion, in Multimedia, I made visile the Master control, with the vertical lines for volume, but when I move the wheel It does nor work, nor in Amarok!! I don't have a similar option in my settings in XFCE.
Do you know what else could I do?
Thank you.
I don't know XFCE so i can't say you how to set shortcuts, but you can use this method to configure the wheel.
First of all open xev. On the square move left/right your wheel and take note of buttons number, then you could install xbindkeys from extra then edit/create .xbindkeys file in your home.
I.E
# Volume Decrease
"amixer -c 0 sset Master 1- unmute cap"
c: ### write here the code recived from Xev
# Volume Increase'
"amixer -c 0 sset Master 1+ unmute cap"
c: ### write here the code recived from Xev
now run xbinkeys. To set permanently put xbindkeys in autostart
Last edited by thepasto (2010-04-29 16:49:39)

Similar Messages

Why is the sound on my Envy not working?

Why is the sound on my Envy not working? Checked all volume levels, mute, settings etc.

Hello NellyMac,
You state you are not getting any sound from your laptop, is that correct? I will be happy to help you.
Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Mouse Wheel does not work on a Laptop?

I have written a program to support mouse wheel action in my appplication. (using 1.4.1) This works fine on my desktop PC but on my HP Laptop it is a no go.
The mouseWheelMoved event doesn't even register on the built-in mouse pad of HP. (I checked it out in debug mode and moving the HP mouse wheel does not generate a mouseWheelMoved event.)
Any help or insight on this problem is appreciated.
Thx

>
The mouseWheelMoved event doesn't even register on the
built-in mouse pad of HP. (I checked it out in debug
mode and moving the HP mouse wheel does not generate a
mouseWheelMoved event.)
Maybe it registers as some other mouse event. Have you trying listening and reporting other events?

Why is the sound on my computer not working?

It makes the start up sound but it won't play music or anything on the internet, like youtube?

no, there's nothing on the headphones.

The click wheel is not working

my click wheel is not working, i cannot select my music because i cant change it..... can you guys help me !!!!!!!!!!

hey and whops about dropping your ipod...
heres what i think but im not an ipod know it all so what i say might not help but any way...
And it connected and updated and everything was okay, instead of the Click wheel control!
well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
Hope it fixes

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

Hi, JoJoEvs.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue. After all steps related to your sound issue have been processed, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jason H

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

20GB click wheel iPod not working- or showing up on computer

My wife's late-2003 20GB click wheel is not working or appearing on either of our Mac computers (either in iTunes or Disk Utility) when attached.
It's making a rather worrying sound (as if trying to engage a hard drive maybe?) and will briefly flash the Exclamation Point/Folder icon, then say Disk Mode and a checkmark and ready to disconnect.
Since it's impossible to find the iPod Updater software how do I restore this iPod- or even just get it out of disk mode? I've tried resetting it and had it plugged into a wall outlet for a day or so to make sure it wasn't a dead battery... any thoughts?
It had been working fine (and regularly connected to the computer to update).

You could try to format the iPod in Windows. It does the same thing as restoring and you would need to restore the iPod as normal (using the iPod updater) afterward. This can work when the iPod is recognized by the computer, but not by the updater.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". When that's finished, restore the iPod using the updater.

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

I have a iMac running on an iMac and the F operation keys are not working properly.

My new iMac bluetooth keyboard is having issues all of the F operation keys are not working exept for F12 witch is supposed to be volume up takes me to mission control. I went into system prefrences and there was no setting in keyboard for the volume keys there are some settings for the operation keys but they are all checked and they are still not working and the settings that are checked arn't even what the keys are supposed to do. Please help.

SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I-pod nano click wheel does not work help!

Hi,
My i-pod nano 1st gen click wheel will not work i have tried restoring,restarting and all the 5 r's but still nothing has happened... there has to be a solution out there somewhere o yea i have also tried taking out the gunk in the click wheel but nothing HELP!

Version in the nano is 1.1; iTunes is 6.0.4.2.
This silly thing "healed itself" the next morning (?!), worked fine for two days, and decided to show the same symptoms this evening, then began working fine again.
Whether it is working or not I can feel the click of the wheel but unit shows no response when the problem is manifesting. So if I am having the problem I can press the wheel any which way for as long as I like and nothing happens -- screen does not light up, unit doesn't scroll, play/pause gives no response, etc.
HP laptop Windows XP

My sounds and audio is not working. it's not in mute. help please

i need help. my sounds and audio is not working. but it's not in mute button.

Hi,
Can you post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The sound's wheel is not working in my laptop

Similar Messages

Maybe you are looking for