The sounds level disappear

The sounds level on my iphone disappeared, no sound comes out of notifications as messages and e-mails do not go by the speaker. In function ipod the sound does not come out too. When I put the headset but the sounds level reappears when the headset shot the sounds level disappears again.

A barra de volume no meu iphone desapareceu, nenhum som sai de notificações como mensagens e e-mails não vão pelo orador. Em função ipod o som não sai muito. Quando eu coloquei o fone de ouvido, mas o bar reaparece quando o fone de ouvido tiro a barra desaparece novamente. O que devo fazer?

Similar Messages

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

How do change the sound level input at the premiere cs6

Hello:
I would like to know how to change the sound level input al the premiere cs6?.
Sincerely, Gabriel Conde

The input sound levels will be determined by the media files you use. The output volume can be adjusted in several ways.
https://helpx.adobe.com/x-productkb/global/offline-help.html

Every time I toggle between silent and regular sound the sound effects disappear on mail how do I fix it?

Every time I toggle between silent and regular sound the sound effects disappear on mail how do I fix it?

With headphones?
With speaker?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I Need to Even out the Sound Level from Tune to tune

This is the problem I'm facing ....
After recording a number of tunes ... and then burning them in iTunes ... I'll find that the ouput level changes from tune to tune.
For example ... one tune's overall sound level is too low compared to the next one.
When I'm mixing I of course try to have the master output as high as possible without clipping.
I have been using Fission to normalize each tune individually ... but
Is there a way to even out the levels from tune to tune. Of course i have "Sound Check" marked in iTunes preferences.
Here is a strange but true story ...
Someone took one of my disks with this problem .... went to a Sony store where they copied it ...
and the sound levels are more even I swear. Is there some sort of software in cd copiers that can do this?
Thanks ......

Here are a couple of articles that give a useful overview of Mastering:
Preparing Your Music For Mastering
Mastering: How The Pros Do It
Other than that, the Normalizing you're doing is the easiest way to even out the relative levels.
WH

How can i adjust the sound level customized for each browser tab?

Hi,
I'm kinda a new mac user. I want to know how i can adjust the sound level specifically for each browser tab or application the way you could do in windows.
Thanks.

Volume Mixer feature that Windows has, is not available in OS X.
Best.

MOVED: I have no sound /the sound level is VERY low: MSI K9MM-v

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=115320.0

Go to Control panel, Administrative Tools, Computer Management, Disk Management and allocate remaining disk space.
OK, i can see around 22 GB of unallocated disk space. i will allocate the remaining disk space.
Check Volume from mixer settings, cable connections, Volume on your speakers.
I have checked and i've the sam problem. the volume in my speakers is maximum and no change. the sound level is VERY low. My speakers works because i have the test in my other PC.

How do you equalize the sound levels of your music

The newests ITunes interface doesn't show any way to manage your music. I want to equalize the sound levels on my libarary. How do I do it?

You should see it in part of the description once the divice is connected to the computer through a usb cable. Or you could look at the number by going on setting on your ipod touch then go to general then from there go on about scroll down until you see serial number and ther it is.

CAN I INCREASE THE SOUND LEVEL

IS THERE A WAY TO INCREASE THE SOUND LEVEL THAT THE SPEAKERS PRODUCE, AT THE 100% POINT ITS NOT VERY LOUD. I OWN THE HP DV6 LAPTOP WITH WINDOWS 7

Hi,
One thing can help is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I've noticed that sometimes the sound just disappears...

...it's an iPhone 4 and randomly the sound when I enter my passcode or press any functions is silent. Any ideas?

Lisaaann wrote:
Sometimes my keyboard disappears - I...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I have two monitors and often watch a film while browsing. How can I change the sound level of firefox so its not too loud?

I just want to be able to control the audio level of firefox separately from other running programs on the puter

Hi jagrix,
Unfortunately, Firefox is yet to have it's own volume control. Consequently, unless a site has it's own volume control, you can not modify firefox's sound.
Personally, I think Firefox having it's own volume control could work out well for digital multitaskers! I'll make a suggestion on bugzilla right now. I will update this post with details of my bug id. later
Hope this helps,
Taddle

Why are all the sound levels so different!?? With VST's and in Ultrabeat...

I'm having so much trouble with the audio levels in logic pro. It seems every VST has a completely different level when the volume on the vst is set to 100. Miroslav Philharmonik is EXTREMELY quiet..., and when I load drums into ultrabeat, they immediately peak like crazy. I tried loading my drums up in battery 3 after that, and all the drums where extremely quiet compared to my other vst's YET it showed in the mixer that they were peaking????? I don't understand what's happening, I know you have to mix but this never happened in any other daw that I've used.

I'm having so much trouble with the audio levels in logic pro. It seems every VST has a completely different level when the volume on the vst is set to 100. Miroslav Philharmonik is EXTREMELY quiet..., and when I load drums into ultrabeat, they immediately peak like crazy.
It's one of a the reasons mixers have volume controls.
Seriously - an orchestral instrument is likely to have hundreds of parts all playing at once. If each part was designed to hit close to 0dB, then it would be impossible to do anything as the resultant mix would be massively loud - you'd have to turn everything down all the time.
Drums are probably going to be peaking fairly loud in a mix, as they do contain a lot of the energy.
There is no standard. A mono synth will often have hotter levels than a polysynth part, as the polysynth could be playing 8-32 voices all at once. Also, different patches, and different instruments themselves will be programmed to have different volume levels.
This is all true regardless of DAWs, and is nothing specifically to do with Logic.
All all the instruments, and mixer channels have volume controls, to let you control their volume and place them where they need to be for your needs.

I have copied movies using Handbrake and put them in to iTunes. The sound level is fine in iTunes. Is it likely to be as loud on the iPad?

I ask this because the volume levels of movies is notoriously low and I really want to use the iPad to watch movies. Other folks' experiences would be helpful.

Ah. ... I don't get my first iPad until Fri 16th (I hope).

Why does the sound level from my mac mini not remain constant?

Bought my mac mini within the last 3 months, and am using my flat screen via hdmi cable as the display. I notice that at some points, the sound will dull down...and I will habe to toggle it up. Then without warning, it jumps back up with a little extra now that Ive added volume. I dont remember it doing this for the first month or so, and cant remember if it coinsided with an update or ... what. I notice that sometimes when the sound fades when im watching a movie, if I tap the movie progress bar, the sound will come back to the prior volume. Ive checked all of the system prefs I can think of... It does this with netflix on safari as well as movies songs through itunes... Help !
Chris

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
Reboot, test again.

When modifying the sound level, finder restart...

Hi,
I have some problems with my MacBook Pro. When I try to put the sound up or down with the button of sound on my keyboard, its like if the Finder was restarting. I checked the sound settings and everything looks OK. I don't know what to do. Please, help.

Hello again,
I just talked to someone at Apple's support, they told me is normal behavior that when you plug speakers or headphones, the sound volume is reset. (The same happens if they are plugged in at boot time).
My G5 did not do that, for sure...
Can anyone confirm this behavior, either on a Mac Mini or on another Mac ?
Thanks !
Yves

The sounds level disappear

Similar Messages

Maybe you are looking for