The source folder must contain a valid boot.wim file

Hi.
I have the following problem
I have downloaded MDOP2014 (en_microsoft_desktop_optimization_pack_2014_x86_x64_dvd_4130158)
I have installed the Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
And then installed MSDaRT81.exe on a Windows 8.1 (with Update) machine
I have also copied the boot.wim from the "Sources" folder from the Win8.1 ISO file.
But when I start the DaRT Recovery Image Wizard an try to point to the folder with the boot.wim file, it gives me:
"The source folder must contain a valid boot.wim file"
I have tried boot.wim files from 8.1 ent, 8.1 ent with update, server 2012 R2, server 2012 R2 with update...no go
I am using boot.wim of win 7.
Any ideas????

Hi,
I found that if you point to the root directory (not the sources folder), then it finds the correct boot.wim. Specifically, I downloaded the 8.1 Enterprise evaluation ISO, then mounted the ISO (F:). When pointing to the sources folder, it gave the same error,
but when I pointed only to F:, it worked fine.
Additionally, both in the wizard and in the article 'Creating the DaRT 8.0 Recovery Image', it states:
Specify the root path of the Windows 8 <64-bit or 32-bit> install media
Hope this helps,
David
MDOP on the Springboard Series on TechNet

Similar Messages

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.

Hi,
I am tryng to create a Flex Project, but got stuck with an error....
The Error is Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
Initially I download jboss-5.1.0.GA and placed it in C folder.
While creating project, I selected J2EE server, selected remote object access service and LiveCycle Data Services...
In the next step, I de-selected the use default location for local LiveCycle Data Services server.
In the root folder - C:\jboss-5.1.0.GA
for Root URL: http://localhost:8700/flex/
Context Root: /flex
when I clicl Validate Configuration.. this is the error I get Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
I can't understand what is going wrong here....any ideas....
Thanks for the Help.....
Thanks

Run the wizard, select ColdFusion as the server technology, but don't
check the option to use remote object access service. Then, open the
project properties dialog, go to the Flex Compiler page, and add a the
compiler flag: -services
"C:\ColdFusion8\wwwroot\WEB-INF\flex\services-config.xml" (obviously
changing the path as appropriate). This flag is what gets set by the
wizard when you opt to use Flash Remoting. -http://www.feed-squirrel.com/index.cfm?evt=viewItem&ID=77732
Above is a work-around/solution that was successful for me. Below are screen shots of how I initially configured the project, following the above solution.
In the image above, notice how I didn't tick the "Use remote object access service" checkbox.
For the image below, the 'Y:\' value is a mapped network directory to my server (IIS) webroot, which is "\\windowsserver/Inetpub/wwwroot/". Root URL is the name of my server. Fill in the fields with correct values and hit finish.
Then navigate ( Project>Properties>Flex Compiler ) to this project's 'Flex Compiler context menu.
And 'W:\' is another mapped network directory that points obviously to my Coldfusion's WEB-INF\flex.
I hope that this helps. As you may see, I'm hoping that this will help you and others that are likely to come across problem.

Setup.exe fails, folder " "does not contain a valid media info file 'mediainfo.xml'"

I'm trying to run the SQL Server R2 setup.exe, and all I get is a command window popping up briefly, then nothing.
This actually affects all SQL Installers that I have on my machine:
2008R2
2012
SSDT BI Pack for VS2012
If I run the setup.exe from the command line, I get this:
An error occurred during the SQL Server 2008 R2 Setup operation
Error result: -2067529698
Result facility code: 1220
Result error code: 30
For more information, review SQL Server R2 Setup Logs in your temp folder
The contents of that log file are:
04/04/2014 10:54:34.489 ======================================================================
04/04/2014 10:54:34.510 Setup launched
04/04/2014 10:54:34.541 Attempting to determine media source
04/04/2014 10:54:34.558 Media source value not specified on command line argument.
04/04/2014 10:54:34.574 Setup is launched from media directly so default the value to the current folder.
04/04/2014 10:54:34.591 Media source: C:\SQL Server Installers\2008 R2\
04/04/2014 10:54:34.608 Attempt to determine media layout based on file 'C:\SQL Server Installers\2008 R2\mediainfo.xml'.
04/04/2014 10:54:34.627 The folder 'C:\SQL Server Installers\2008 R2\' does not contain a valid media info file 'mediainfo.xml'.
04/04/2014 10:54:34.649 Setup closed with exit code: 0x84C4001E
04/04/2014 10:54:34.677 ======================================================================
I've checked 1000 times that the folder DOES contain a mediainfo.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<MediaInfo>
<Properties>
<Property Id="MediaLayout" Value="Full" />
</Properties>
</MediaInfo>
I've seen a few suggestions elsewhere in search results, but nothing has worked so far.
I've previously run the 2008R2 installer and the 2012 installer without problems, so I'm not sure what has changed, or how to get round it.
I'm running on Windows 7 Enterprise SP1, 64 bit with up-to-date Windows Updates.
Any help would be very much appreciated.

In addition to Alberto’s suggestion:
Validate the setup media is not corrupt.
http://thesqldude.com/2012/01/27/sql-server-setup-how-to-validate-downloaded-imagemedia-before-installation
Install .net framework 3.5 and 4.0. Repair them, if already installed.
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful.

UDF to capture the source file name or the source folder for mapping

Hi All,
i have 2 files - File1 from File2 from 2 different folders- single comm channel FTP (FCC). i have to pass a constant A and B respectively to a field in target structure.
my options are -
either create a new field in source str populating different constants and then map to the target str
or a udf to get the source file name or the source folder so that i can map the constant using the value mapping/FixValue mapping.
please suggest. thanks.
rajib

Hi,
please use the UDF to determine the file name. Then based on file name either pass A or B to your target field.
The code is as given below. Just tweak the code to pass either A or B as per your requirement.
public String G_GetFileName(Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Regards,
Deepak.

Endpoint Protection error: The source folder for content does not exist.

I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!

Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:47 AM   5920 (0x1720)

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine.

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine. All file types, Lightroom is no longer recognising the images to import, The panel that usually displays them remains empty. Try using backup versions, removing software that could conflict , still no joy, has anyone had this problem?

Did you follow this procedure?
Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd. DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

UDF to copy the file from the archive folder to the source folder

HI,
I need a UDF to copy the xml file from the archive folder to the source folder. I dont want to create a new comm channel
Regards,
Varun
Edited by: Varun Reddy on Sep 15, 2009 11:23 AM

Hi Varun,
do you want to copy or move the files??
Also can you explain the time when this movement should happen? this gives a little insight on the problem and also some optimum solutions can be suggested
Regards
Suraj

How do I read properties file kept in the source folder in weblogic workshop

I want to have a log.properties file in the folder of the source java code which
is reading this properties file. When I build the code the properties file also
should go with the generated .class files.
I am using class.getResourceAsStream("log.properties")
I tries different ways to make the class to read the file, but it failed to find
the properties file. Is there any way to keep the configuration files in the same
directory of the source java code ? This is the problem of weblogic workshop 8.1.
This thing runs fine in Tomcat.

Did you try and add the path where the .properties file is located in the CLASSPATH?

Import failed, because the sources are not contained in the archive

Hi,
I need to customized some configuration in the Component CPRXRPM_UI.
So I have created a Track to Modify the CPRXRPM_UI Component. When I am trying to Import the Compoent I am gettting the below error,
20090625182941 Info   :Starting Step Repository-import at 2009-06-25 18:29:41.0130 +5:00
20090625182941 Info   :Component:sap.com/CPRXRPM_UI
20090625182941 Info   :Version :MAIN_PPM45VAL_C.20080919144429
20090625182941 Info   :1. propagation request is of type TCSSoftwareComponent
20090625182941 Fatal :import failed, because the sources are not contained in the archive
20090625182941 Info   :Step Repository-import ended with result 'fatal error' ,stopping execution at 2009-06-25 18:29:41.0131 +5:00
Can any one suggest the solution for the issue

Hi Baskar,
I am facing the same issue.
Wondering if you have figured out a way.
Please let me know what you did to achieve the desired result.
Regards,
Sumit Oberoi

When I download certain files(most often exe files), I'm not able to open the source folder anymore when the download is complete.

When I download certain files(most often exe files), I'm not able to open the source folder anymore when the download is complete. Neither can I execute the exe file. It often forces me to redownload the file in google chrome and then I go to the source folder and right click properties and I have to unblock the file. Only then I'm able to start the exe file.
FYI: I use vista, so that might be the problem by itself...

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

"The extentions does not contain a valid signature"

Hi, i got a problem when i installing RA Beauty retouch "The extensions does not contain a valid signature", can anyone help me cause i really want use this extention, running on macos 10.9.4 and adobe extention manager CC ! And i already uncheck Extension access internet too !

Oh, thank god you reply me, the plugin full name is RA Beauty Retouch Panel
and this is the website : RA Beauty Retouch Panel for Photoshop CC, CC 2014 & CS6 | Retouching Academy
can you check this for me ? thank you very much !

How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

[discussion moved to Creating, Editing & Exporting PDFs forum]

XAI Outbound Message with status complete not found in the Source Folder.

hi
I Configured XAI to send a flat file into a source folder but even after all my message are in complete stage in CC&B but i can not find the file in the source folder.
Please help
Edited by: findabhi on Jun 2, 2010 5:00 AM

Please check mpl.log which can be found in <environment>\logs\system
When MPL is started you will see something like the following in the log file for an XAI Sender using the FLATFILESNDR XAI Class where <XAI SENDER name> equals the name of the XAI Sender you created.
[Tue Jun 01 16:36:15 CEST 2010] Initializing Sending manager.
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - File name pattern is C:\spl\sploutput\ccb230d1\Message$$ID.xml
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - Append is off
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - File encoding is UTF-8
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - The DateTime format 'yyyyMMddmmss' will be used to append to a file name.
[Tue Jun 01 16:36:15 CEST 2010] Sender "<XAI SENDER name>" initialization completed.
What does your log file say? Please note I have Windows VM with CC&B so I can access C:\... without any issues. If you're using a different OS, make sure the file path is correct (check forward - backward slashes) and CC&B has permission to write to the designated file path.

How to get the source code of an HTML page in Text file Through java?

How to get the source code of an HTML page in Text file Through java?
I am coding an application.one module of that application is given below:
The first part of the application is to connect our application to the existing HTML form.
This module would make a connection with the HTML page. The HTML page contains the coding for the Form with various elements. The form may be a simple form with one or two fields or a complex one like the form for registering for a new Bank Account or new email account.
The module will first connect through the HTML page and will fetch the HTML code into a Text File so that the code can be further processed.
Could any body provide coding hint for that

You're welcome. How about awarding them duke stars?
edit: cheers!

The source folder must contain a valid boot.wim file

Similar Messages

Maybe you are looking for