The speakers/sound on my G7-2010 Notebook have stopped working

I am using Windows 7 and resently allowed Microsoft to install critical updates. I have tryed turning the sound back on my using the keyboard keys as well as the build in troubleshooter. Nothing seams to solve the problem. Help

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56803.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

The new field blur and tilt shift filters have stopped working

The new field blur and and tilt shift filters worked a few times but are now greyed out in the menus. Any ideas why? Thanks.

Did you check the settings Chris mentioned? Your issue sounds like there might be a video card or driver issue, which can disable the GPU related features and give you a lesser version of the blur filters. See this link for some troubleshooting suggestions. See if issues with the video card have disabled - Edit>preferences>performance use graphics processor. Also check the advanced settings drawing modes. Be sure you have the current driver (system is updated and current on mac or go to the video manufacturer's website for pc) . That is often the cure.
You might want to copy your system information (photoshop help>system info) here for us to look at.
Pattie

I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume

I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume, basically the speakers just sound weird, there's no word to describe it, I can't really hear any bass from my speakers

Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao.

I recently used the computer for I player over the TV, but when removing the external speakers the internal speaker appears to have stopped working and when going on to system preferences and sound I am only given the option of digital out put. Help

I recently used the computer for I player over the TV, but when removing the external speakers the internal speaker appears to have stopped working and when going on to system preferences and sound I am only given the option of digital out put. Help

Do you see a red light shining in the headphone port?

My iphone5 speakers have stopped working. the headphones still work as does the ringer. the phone indicates it is still in headphone mode. does anyone know how to fix this ?

after running i disconnected my iphone headset. since then my iphone speakers have stopped working. i can still listen to music using headphones and the phone ringer still works but the speakers are silent. when i adjust the volume it indicates it is in "headphone" mode. Any idea how i can solve this problem ?

I have read in other threads with similar problems that cleaning the headphone jack/port seems to usually work. The simplest method is to rapidly plug/unplug the headphones a few times. See if that works.

I have an hp dv6910us and the system speakers have stopped working. I cannot reinstall the driver.

I have an hp pavilion dv6910us and the speakers have stopped working and no longer show as installed as a device. I have tried reinstalling the audio device driver, but the hp website does not list a driver for my specific laptop.
Right now it shows that I have a bluetooth audio device installed. I have never installed this device and don't know where it came from.

I had the exact same problem, updating updating the Mbox 2 drivers on the Avid website has fixed the problem.
http://avid.force.com/pkb/articles/en_US/Download/Mbox-2-Drivers?retURL=%2Fpkb%2 Farticles%2Fen_US%2FDownload%2FMbox-2-Drivers&popup=true

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does the sound for my iPad lock and keys stop working

Why o the sounds for my iPad lock and keys stop working?

1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Internal speakers have stopped working (Lenovo W500 with Win 7 Pro)

Hi
I have a Lenovo W500 4062-5YG... O/S: Win 7 Pro
My sound device is a Conexant 20561 SmartAudio HD.
The problem is, that the internal speakers have stopped working all of a sudden... I think it is a hardware problem since when I hookup external speakers or headphones they produce sound... but I am no expert!
I have done the following to try and fix it:
Disable, then enable audio drivers
Uinstall, then install audio drivers
Setting the internal speakers as the default speaker source
Restoring the system to an earlier day (where I knew that the speakers had functioned)
None of these actions have worked.
I actually thought I could perform a hardware test on the speakers in the "Lenovo Solution Center"... but it doesn't seem like it:-(
So...
How can I know for sure whether it is a hardware or software problem?
And more importantly - How can I get my internal speakers to work?
Any help is appreciated.
Cheers
Philip

Hello Philip,
As mentioned in your post, you have performed all the major troubleshooting steps to resolve the issue. I suggest you to update your BIOS also in order to resolve your issue. You can download and update the BIOS update utility from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
Kindly click on Quick path and put your 7 Digit TYPE-Model number(40625YG) in the box and then click on the Find My Product. Please click on BIOS and then download the BIOS update utility according to your Operating System. It might resolve your issue. If it will also not work then it seem to be an issue with hardware. Kindly get in touch with the support centre they will assist you and try to resolve the issue.
Regards,
Harish
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hp Pavillion Laptop with Windows 8 - Speakers have stopped working but headphones do! Please Help!

Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones do though there is a low buzzing sound when i use them.
When in control plan to look at the problem it tells me they are working.
Please help - laptop is only a few months old!
You will be my hero.
This question was solved.
View Solution.

Hi,
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Properties. Click the Driver tab and then click 'Update driver'. Select 'Browse my computer for driver software' and then select 'Let me pick from a list of device drivers on my computer'. Left click 'High Definition Audio Device' once to highlight it and then click the Next button to install it.
Has this made any difference?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth. It's as if it no longer recognises any other audio output, even when i have disconnected the headphones

System Prefernces > Sound > Output
Internal Speakers selected?
"Mute" enabled? Disable it
Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

My inernal speakers have stopped working. I now have a little 'no entry' sign.

My internal speakers have stopped working - when I click on 'sound' I get a little 'no entry' sign; I've done all the Preferences things, and looked at Help, but no result!

Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao.

The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!

The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!

It's not Logic that can't find them, it's your Komplete apps, though if you did exaclty as you say I can see no reason why they can't.
Do you know where the apps installed them in the first place? I chose a non-standard locarion for mine, but I'm sure it installs sounds to your documents folder/native instruments/name of app.
Go into the prefs of each app and choose the library location button on the library tab and point it to the relevant folder in documents/native instruments and see if that works
jake

The speakers/sound on my G7-2010 Notebook have stopped working

Similar Messages

Maybe you are looking for