The specified application doesn't exist
I update an existing application in the Dev environment with the Copy Application Tool and a user got the following.
The specified application doesn't exist.
Trace: Number:-2147220954
Description:
Source:General Security Error
Page:
Since this issue is related to only one user, this means that the USERPARAMS information for this user is corrupted.
The issue could be resolved by deleting all entries related to this user on this table on the HFM DB.
Kindly open the HFM DB and look for the <application name>_userparams table.
and,
Delete the enteries corresponding to the user.Backup this table prior truncating the table.Please get this operation done by an administrator.
Edited by: user10931567 on 16-Jul-2009 10:03 AM
Similar Messages
-
Encounter error with command "New-MailboxFolder" (The specified mailbox doesn't exist)
[Symptom]
======================
Generally, a user can use “New-MailboxFolder” command to create mailbox folder for his own mailbox successfully. See the following example:
The above command creates a new folder named “PersonalFAQ” in the mailbox of Administrator.
However, this command cannot be used to create folders on other user’s mailbox although the full access permission is assigned. See the follow example. (We already granted the full access permission of
test1 user to administrator user)
Just as what the picture shows, an error message will appear:
“The specified mailbox “username” doesn’t exist.”
[Cause Analysis]
=======================================
It’s by default. The “New-MailboxFolder” command cannot be used to create folders for other mailboxes.
[Workarounds]
==============================
1. Use EWS channel to create the folders for other mailboxes.
http://msdn.microsoft.com/en-us/library/office/dn535504(v=exchg.150).aspx#bk_createfolderewsma
2. Use MFCMAPI:
3. PFDAVADMIN (Exchange 2003/2007) or Exfolders (Exchange 2010)
More information:
Creating Folders (Exchange Web Services)
http://msdn.microsoft.com/en-us/library/office/aa563302(v=exchg.140).aspx
New-MailboxFolder
http://technet.microsoft.com/en-us/library/dd335113(v=exchg.150).aspx
Microsoft Exchange Server MAPI Editor
http://www.microsoft.com/en-gb/download/details.aspx?id=2953
Exchange 2010 SP1 (and later) ExFolders
http://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Since this issue is related to only one user, this means that the USERPARAMS information for this user is corrupted.
The issue could be resolved by deleting all entries related to this user on this table on the HFM DB.
Kindly open the HFM DB and look for the <application name>_userparams table.
and,
Delete the enteries corresponding to the user.Backup this table prior truncating the table.Please get this operation done by an administrator.
Edited by: user10931567 on 16-Jul-2009 10:03 AM -
Getting " Application doesn't exist " in HFM workspace
Hi ,
When I am trying to open a application in my HFM workspace i am getting below error
" Specified Application doesn't exist"
Code : - 2147220954
Actor : General security Error.
I am able to open other applications in HFM workspace without any error.
Note : No other user is facing this issue and i was able to access this application last month .This may not be the right forum for HFM issue but anyhow...
Did you check Oracle support article.
Financial Management Error "The specified application doesn't exist" After Changing Name Of Cluster Or Application (Doc ID 738003.1)
Thx
Vivek -
Application Doesn't exist.
Good day Experts,
When i am trying to open application in shared services i am getting the following error.
Processing Error:
Description: The specified application doesn't exist.
Code: -2147220954
Trace: null
Actor: General Security Error
FYI- the path is http://servername:58080/interop/
Projects--> HFM--> Application.
Please advise me on this.
your reply is most appreciated!!!
Many Thanks,
AnilHi Tony,
Many thanks for your mail.
Clarify me that is the application will open in workspace without registering with Shared services???
FYI - I am unable to open the application through Workspace also! and getting the following error.
There was some communication error: Response is :
http://servername:19000/hfm/globalworkspaceNav/bpm/modules/com/hyperion/hfm/web/appcontainer/Adf.asp
Please Advise me.....
Regards,
Anil -
Hello,
two of our users get the following error message, when opening two specific reports:
First Report: Cannot find Dimension Scenario.
Second Report: Error executing query: the member null doesn't exist in this application.
Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
I set the same rights for me, but i can access the reports without problems.
Somebody encountered the same problem before?Hi there,
I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
In order to fix it:
1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
3. If he cannot see the dimension, try to change the layout of the report.
Regards,
Thanos -
The Specified Directory Does not Exist
Hi expert
could you help me with my problem , this word " The Specified Directory Does Not Exist" its some stupid question , isn't it ?
this is my sitiuation :
1. BPC version is SAP BPC 5.0.512
2. we are using MS Excel 2003
our user do some modification from BPC WEB (the BPC open excel file with many macro and add-in etc ... ), then user save using Save Dynamic Template sub menu from eTools menu , and raise message "The Specified Directory Does not Exist < directory path>/eEXCEL. "
the questions Are .
1. Could anyone explain why BPC try to save in Client Local Direcory not is BPC Server
2. Could anyone help me how to resolve the problem ?
(i am appolagize with my bad english )
thanks.HI nvsleman ,
I had the same problem and I manually copied the eExcel folder (on my local harddrive) from a working application to the application in question.
Hope this helps
Sabine -
Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is emptyMake sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Azure Rest API PUT Block Blob Returns "The specified resource does not exist" CORS
I am trying to upload a file to Azure Blob storage. For some reason when I try to put a new block blob on in the storage it tells me the resource does not exist. I am sure it is something silly I am missing.
According to the documentation:
The Put Blob operation creates a new block blob or page blob, or updates the content of an existing block blob. Updating an existing block blob overwrites any existing metadata on the blob. Partial updates are not supported with Put Blob; the content of the
existing blob is overwritten with the content of the new blob. To perform a partial update of the content of a block blob, use the Put Block List (REST API) operation.
CORS is setup and that seems okay.
When I do a preflight and get this:
Request URL:https://<account>.blob.core.windows.net/test/image.png
Request Method:OPTIONS
Status Code:200 OK
Request Headers
OPTIONS /test/image.png HTTP/1.1
Host: <account>.blob.core.windows.net
Connection: keep-alive
Cache-Control: no-cache
Pragma: no-cache
Access-Control-Request-Method: PUT
Origin: http://www.<site>.com
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36
Access-Control-Request-Headers: accept, content-type
Accept: */*
Referer: http://www.<site>.com/azure/
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-US,en;q=0.8
Response Headers
HTTP/1.1 200 OK
Transfer-Encoding: chunked
Server: Blob Service Version 1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 0d372e95-1524-460a-ab9c-7973d42a7070
Access-Control-Allow-Origin: http://www.<site>.com
Access-Control-Allow-Methods: PUT
Access-Control-Allow-Headers: accept, content-type
Access-Control-Max-Age: 36000
Access-Control-Allow-Credentials: true
Date: Thu, 27 Feb 2014 22:43:52 GMT
But when I make the PUT request these are the results.
Request URL:https://<account>.blob.core.windows.net/test/image.png
Request Method:PUT
Status Code:404 The specified resource does not exist.
Request Headers
PUT /test/image.png HTTP/1.1
Host: <account>.blob.core.windows.net
Connection: keep-alive
Content-Length: 22787
Cache-Control: no-cache
Pragma: no-cache
x-ms-blob-content-dis; filename = "image.png"
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36
Content-Type: image/png
x-ms-blob-type: BlockBlob
Accept: application/json, text/plain, */*
x-ms-version: 2013-08-15
Origin: http://www.<site>.com
x-ms-date: Thu, 27 Feb 2014 23:19:19 GMT
Referer: http://www.<site>.com/azure/
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-US,en;q=0.8
Response Headers
HTTP/1.1 404 The specified resource does not exist.
Content-Length: 223
Content-Type: application/xml
Server: Blob Service Version 1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: d5a60c8b-356a-44ff-93af-0ea720b5591f
x-ms-version: 2013-08-15
Access-Control-Expose-Headers: x-ms-request-id,Server
Access-Control-Allow-Origin: http://www.<site>.com
Access-Control-Allow-Credentials: true
Date: Thu, 27 Feb 2014 23:22:42 GMTYour request must be authenticated to be able to upload a blob. Please see our
Windows Azure Storage: Introducing CORS blog post for more information on using Shared Access Signatures with CORS. -
EXS24 samples won't boot: "Specified Volume Doesn't Exist"
My sample library is in my external drive... I scanned the whole thing in Project Manager, which took forever, and I saved it...and I was able to use the samples on EXS24.
But when I reboot Logic, only the samples that were recorded are recognized...
when I try to pick a new sound I get the most lovely message:
"Specified Volume doesn't exist:
Result Code -35"
any suggestions pleez?Tovinho,
Thank you very much for reading my post and for the suggestion... I already have chosen this setting... in addition, I have "Search Project Manager Database and Search Engine" also chosen in that window, and after I boot Logic, the computer always goes through the "updating tree" process.
But I still get the same error message.
Kam -
The specified screen does not exist in the DLIB file
Dear Experts,
I have copied the program of VA01 to Zprogram and created ztransaction when I execute ztransaction it will goto first screen, after I type input and click enter I will get below message
Screen zsapmv45a 4470 does not exist
when I check help (F1) it says as follows
Diagnosis
The specified screen does not exist in the DLIB file.
Procedure
Specify the programm and the screen number correctly.
If you want to generate a list of existing screens, select the program
and screen number on the Screen Painter selection screen. In the case of
the screen number, you can only enter a * in the first position.
can anyone tell me that how to maintian screen in DLIB file?
Thanks in Advance...
VenkateshDo you have such a screen number under the function group where you have copied the transaction VA01?
If not chek in standard func group for this screen and copy it. -
I changed my id. When I want, now, update my apps I'm asked my pwd corresponding to my old id. I forgot this old pwd and can(t get it from apple. It seems the old id doesn(t exist anymore. What should I do?
J'ai changé mon id. Je veux mettre à jour mes appli mais on me demande le pwd de mon ancien id que j'ai oublié. Je ne peux pas le récupérer. Il semblerait que mon ancien id n'existe plus. que dois je faire?Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
Next see:
Frequently Asked Questions About Apple ID -
Build error 'CFURLGetFSRef failed - maybe the output directory doesn't exist?' Eclipse
I downloaded and installed the Adobe InDesign Plug-in Editor as an Eclipse distribution, the InDesign SDK and XCode on my iBook G4 with Mac OS X 10.4.10. Creating an InDesign project works fine. I only have to drag-and-drop elements on a form and add some actions.
Unfortunately, I can't get the Ant Build working. I followed the video-tutorials on the Adobe labs site, but I'm still getting this error:
CFURLGetFSRef failed - maybe the output directory doesn't exist?
The error seems to be in the "/Adobe InDesign CS3 Products SDK/devtools/bin/odfrc-cmd" file. I guess it's a SDK problem.
Does anyone know what the reason is for this error? And maybe how I can fix it?This is the full output.
"Ld "/id5sdk/build/mac/prj/build/InDesign en InCopy plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign and InCopy plug-in" normal ppc
cd /id5sdk/build/mac/prj
/usr/bin/g++-4.0 -o /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in -L/id5sdk/build/mac/prj/../debug/sdk -L../../../build/mac/debug/packagefolder/contents/macos/libs -F/id5sdk/build/mac/prj/../debug/sdk -F../../../build/mac/debug/packagefolder/contents/macos -F../../../build/mac/debug/packagefolder/contents/Frameworks -filelist /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in.LinkFileList -lPublicPlugIn -framework InDesignModelAndUI -framework Carbon -framework InDesign\ and\ InCopy\ plug-in -arch ppc -Wl,-single_module -install_name InDesign\ and\ InCopy\ plug-in.InDesignPlugin/Versions/A/InDesign\ and\ InCopy\ plug-in -Wl,-Y,1455 -dynamiclib -mmacosx-version-min=10.4 -Wl,-Sp -Wl,-executable_path -Wl,../../../build/mac/Debug/packagefolder/contents/macos -isysroot /Developer/SDKs/MacOSX10.4u.sdk
ld: can't locate framework for: -framework InDesign en InCopy plug-in
/usr/bin/libtool: internal link edit command failed"
Anyone who can help me? -
Hi,
We have a requirement to purge the Azure WADLogs table on a periodic basis. We are achieving this by using Entity group transactions to delete the
records older than 15 days. The logic is like this.
bool recordDoesNotExistExceptionOccured = false;
CloudTable wadLogsTable = tableClient.GetTableReference(WADLogsTableName);
partitionKey = "0" + DateTime.UtcNow.AddDays(noOfDays).Ticks;
TableQuery<WadLogsEntity> buildQuery = new TableQuery<WadLogsEntity>().Where(
TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.LessThanOrEqual, partitionKey));
while (!recordDoesNotExistExceptionOccured)
IEnumerable<WadLogsEntity> result = wadLogsTable.ExecuteQuery(buildQuery).Take(1000);
//// Batch entity delete.
if (result != null && result.Count() > 0)
Dictionary<string, TableBatchOperation> batches = new Dictionary<string, TableBatchOperation>();
foreach (var entity in result)
TableOperation tableOperation = TableOperation.Delete(entity);
if (!batches.ContainsKey(entity.PartitionKey))
batches.Add(entity.PartitionKey, new TableBatchOperation());
// A Batch Operation allows a maximum 100 entities in the batch which must share the same PartitionKey.
if (batches[entity.PartitionKey].Count < 100)
batches[entity.PartitionKey].Add(tableOperation);
// Execute batches.
foreach (var batch in batches.Values)
try
await wadLogsTable.ExecuteBatchAsync(batch);
catch (Exception exception)
// Log exception here.
// Set flag.
if (exception.Message.Contains(ResourceDoesNotExist))
recordDoesNotExistExceptionOccured = true;
break;
else
break;
My questions are:
Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
Would this logic fail in any particular case?
How would this approach change if this code is in a worker which has multiple instances deployed?
I have come up with this code by referencing the solution given
here by Keith Murray.Hi Nikhil,
Thanks for your posting!
I tested your and Keith's code on my side, every thing worked fine. And when result is null or "result.count()<0", the While() loop is break. I found you code had some logic to handle the error "ResourceDoesNotExist" .
It seems that the code worked fine. If you always occurred this error, I suggest you could debug your code and find which line of code throw the exception.
>> Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Base on my experience, we could use code (like the above logic code) and using the third party tool to delete the entities manually. In my opinion, I think the code is every efficient, it could be auto-run and save our workload.
>>Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
In you code, you used the "recordDoesNotExistExceptionOccured " as a flag to check whether the entity is null. It is a good choice. I had tried to deleted the log table entities, but I used the flag to check the result number.
For example, I planed the query result count is 100, if the number is lower than 100, I will set the flag as false, and break the while loop.
>>Would this logic fail in any particular case?
I think it shouldn't fail. But if the result is "0", your while loop will always run. It will never stop. I think you could add "recordDoesNotExistExceptionOccured
= true;" into your "else" block.
>>How would this approach change if this code is in a worker which has multiple instances deployed?
You don't change anything expect the "else" block. It would work fine on the worker role.
If any question about this issue, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I get a message-error opening installationlog file. Verify that the specified lof file location exists and is writeable-when I try to uninstall iTunes and other components. How can I uninstall and reinstall iTunes?
Hey jemerritt,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resources may help to resolve your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
The Videos application doesn't work in my ipod touch
The Videos application doesn't work and movies cannot be played on both my 3rd and 4th generation ipod touches
Make an appointment at the Genius Bar of an Apple store or contact AppleCare and get a replacement set of headphones under your warranty.
Maybe you are looking for
-
Hello, this is my first post here. I captured some crucial footage with SONY HDR-SR1 (http://www.mobilewhack.com/200610052327471.jpg) and did my first mistake by not importing the footage through final cut pro... The camera borrowed came with a softw
-
Background Image in JTable headers
Hi I used the following article http://java.sun.com/products/jfc/tsc/articles/swing2d/index.html to create a background image in my java application and then also how to make the table "see through". I have managed this apart from one small problem.
-
What are these values after importing raw formats?
Hello, I am using Lightroom 5.7, and I import .nef files (Nikon D800). I import the .nef files without any Quick Develop settings (set to 'None'). My default presets are not specific to the camera serial number, and also not specific to the camera is
-
No sound with Flash in Firefox - making me crazy
No sound plays from any flash objects in Firefox (so, that includes sites with flash videos like youtube or other sites like homestarrunner.com, etc). Here's what I've tried: --I can play music from my hard drive (so it's not a problem with my speake
-
I have several buttons which move you to different points on the timeline. There are four that move you backwards, and four that move you forwards. This was first developed in Flash 4, but I have recently tried to update it in a Trail version of CS3.