The specified cache entry could not be loaded during initialization

The OBIEE server is failing every few minutes of working.
I saw in the NQServer.log:
The specified cache entry could not be loaded during initialization.
Cache entry, '/home/oracleadmin/OracleBIData/cache/NQS_rprt_734086_39693_00000001.TBL', is invlaid due to either non-existing file name, size does not match, exceeding maximum space limit nor exceeding maximum entry limit, and it's been removed.
I checked the directory and there is no space limitation.
Can someone please clarify?
The server/Config/NQSConfig.INI is as follows:
[ CACHE ]
ENABLE = YES;
DATA_STORAGE_PATHS = "/home/oraceladmin/OracleBIData/cache" 2000 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;

It's more than enough if you are using it for .tmp and .tbl files storage. Have you checked work_directory_path in NQSConfig.ini file .Is it on diffrent mount point.Usually we wil create a seperate mount point and use that as storage location.
b. Instead of using SAPurgeAllCache() , can I add shell script which delete the files fromt the cache directory and the execute run-sa.sh?You need to understand diffrence between OBIEE rpd cache and .tbl and .tmp file. SAPurgeAllCache() will purge cache from RPD.It wont purge .tmp or .tbl files.These files will be stored in some physical location.When a report start executing .tmp file will start evoluting and after execution of report it will be purged by OBIEE server automatically.
see this blog for some insight into this topic
Re: TMP Files uneder /OracleBIData/tmp
Regards,
Sandeep

Similar Messages

One of the specified disk images could not be opened

I cannot believe how instable my system is. I switched to Mac to get a reliable system, but I cannot do without Windows entirely, hence my heavy use of VPC.
Today I got the small grey screen "You need to restart your computer". I was running VPC at the time. All apps were closed except Windows Explorer (the file system). The cause was merely unplugging my broadband connection. Wow!
On rebooting VPC I got:
"One of the specified disk images could not be opened. The disk image file is not the correct file type or uses a file format that is unsupported by this version of Virtual PC."
I "detached" my "drives" 2+3, which were pointing to my Drive2.vhdp and Drive3.vhdp data "drives" and tried again. No luck.
Drive 1 was pointing to Disk1.vhdp, which is a part of my Windows 2000.vpc package. I don't believe that it was pointing there before the crash.
# side note #
(The Windows 2000.vpc package is an old installation that I don't use but have not deleted. I currently use one called: "Windows 2000 copy 1-011105") which might or might not be a copy of "Windows 2000.vpc." I've had so many problems, it's hard to say.
I then tried and successfully detached the Disk1.vhdp and received a warning:
"The hard drive data previously used by Drive 1 is no longer contained in this PC document. The data has been moved to a separate Virtual Hard Drive Document "Windows 2000 copy 1-011105 Disk1.vhdp".
On examining the above package I find:
BaseDrive.vhd 14.45GB (size about right) dated last night when I last closed VPC
MainPackageFile Alias
UndoDrive1.vud dated at the time of the problems.
On examining my "Windows 2000 copy 1-011105.vpc7 I find:
Configuration.plist
IconCache
MainPackageFile Alias
StartMenu.plist
Do you have a suggestion as to how I can rescue my above mentioned BaseDrive.vhd please? This is more recent than my last back-up.
Many thanks in advance.

Problem solved.

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

Adobe 9.4.5 Pro "The Acrobat PDFMaker Server could not be loaded"

I am running Office 2003 SP3.
When I try to create a pdf ( Version 9.4.5 ) either from Excel or Word , I get the above message.
Any help is much appreciated. Thanks in advance.

Thank you very much , Mike
I did repair and re-started the pc.
It still gives the same error message "The Acrobat PDFMaker Server could
not be loaded"
Best Regards !

The database DLL 'crdb_oracle' could not be loaded.

I have built a .net 2.0 website that is using Crystal Report Viewer with an Oracle 10g Database. All works well on my local machine but when deployed to the web server I get the following error:
Failed to load database information. Details: The database DLL 'crdb_oracle.dll' could not be loaded. Error in File C:\DOCUME1\DMTEST\ASPNET\LOCALS1\Temp\test {BB80E9A1-92CE-402D-A52A-47ECE4330794}.rpt: Failed to load database information.
I have run the Crystal Reports for .Net Framework 2.0 setup and have located the 'crdb_oracle.dll' file in the C:\Program Files\Common Files\Business Objects\2.7\Bin directory. Am I missing a step in this process.
The Web Server is a Windows 2000 box.
Thank,
John

I am having a similar problem. However, I do not have CR installed, but want to use only CR from within VS 2008 and deploy a ASP.NET reporting app to IIS. If I create a simple report with no parameters it will run fine in both VS and IIS. However, if I add a parameter to the report such as UserId={?Parameter1} then on execution, the report will prompt for the parameter and then throw this error, "The database DLL 'crdb_oracle' could not be loaded."
I have added full privileges to the ASP.NET, IUSR, and IWAM for the Oracle folder. I also search the hard drive and find only one OSI.dll and no crdb_oracle.dll.
Can you tell me if my scenario is supported with VS 2008 only?
I am connecting to the DB like this:
            ConnectionInfo connectionInfo = new ConnectionInfo();
            connectionInfo.ServerName = "Driver={Microsoft ODBC for ORACLE};Server=localhost;Port=1521;";
            connectionInfo.DatabaseName = "dev";
            connectionInfo.UserID = "...";
            connectionInfo.Password = "...";
            TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
            foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
                tableLogOnInfo.ConnectionInfo = connectionInfo;
Thank you,
Travis

The Acrobat PDFMaker Server could not be loaded

Hi All, Using Acrobat 8 pro on xp system inc Office 07. Suddenly today i am unable to create a PDF from any doc unless using PDF printer option. My COM add in tabs vanished. I have uninstalled booted etc then reinstalled no change. I have also run the installer in repair mode, no joy. I have managed to recover the COM add ins from the disabled option for all my windows progs such as word etc but all come up with the warning " The Acrobat PDFMaker Server could not be loaded" This also counts for creating a PDF direct from the PDFMaker opening page. Any ideas anyone as i believe the problem lies with Acrobat rather than the windows components.

"PDFMaker server could not be loaded"
I just did the following to my xp, office 2003 system
1. updated to sp3 again
2. update to .NET on most recent version
3. deleted blocking of old formats such as old ppt, dbf etc on office 2003
4. put patch for 2007 read on 2003
5. uploaded Adobe 8.0.1.2
6. then tried to used pdf maker and got the deadly: "PDFMaker server could not be loaded"
7. then went through usual suspects of reloading, removing and then reloading, etc, even redid the dlls, no use
8. if this seems to be as wide spread a problem as it appears on the web boards would one not think adobe in the kindness of its heart would fix it
9. i can print to pdf and it is editable
10. the adobe convert logo is now missing when i look at the files on windows explorer and right click, so somehow the upgraed washed out all functions
11. well at least it worked for a few days, better than microsoft, but you guys are catching up fast
12. in my companies i tell my people, if all else fails listen to the customer! it works

The Adobe PDF Maker could not be loaded

With Acrobat 9, XP and Office 2007...
When in Word 2007, I click "Adobe" on the toolbar to convert the Word file to pdf. However, when I do this, I get the message "The Adobe PDF Maker could not be loaded" and am given the option to run Repair Mode.
The conversion works fine from Print|Adobe pdf but this takes away some of the convenience of using the program.
I've run Repair Mode and no change in results. I've uninstalled and reinstalled Acrobat. Any other suggestions?
Thanks.

Doubt this is the problem, but it might be worth a check. In past versions of OFFICE, you sometimes had to allow PDF Maker as a trusted macro. Haven't heard about the problem with AA9, but it might be a possibility.

The class or interface could not be loaded...?

I'm doing a simple link code. I've tried many diferrent ways to do this but this error keeps comming up saying The class or interface could not be loaded...
home_btn.addEventListener(MouseEvent.CLICK, gotoURL);
function gotoURL(event:MouseEvent):Void
navigateToURL(new URLRequest("my site"));
This is the most recent method I've tried in doing this. I've tried changing the publishing settings of the document to and from Action Script 3.0- using an import command. But thats too complicated. I know this is simple... but can anyone please help?

Thanks, but whenever I change the publish settings back to As3 the flash tween gets caught in a loop and it doesn't end, it just re-runs the swf over and over again. I'm not sure how to fix this problem now.
I even tried to add a stop(); at the beginning of the new script.
stop();
home_btn.addEventListener(MouseEvent.CLICK, gotoURL);
function gotoURL(event:MouseEvent):Void
navigateToURL(new URLRequest("http://www.knirv.com"));
I'm still getting an error message saying "1046: Type was not found or was not a compile-time constant: Void."...However, I'm sure your advice to upload to my server will solve this. Much thanks for the expertise

The common language runtime could not be loaded.

The common language runtime could not be loaded error in receiving while opening excel file in windows 7.

Hi,
Is this problem just occures when opening excel file? How about other office program?
Did you make any change to your Office, such as install language package, etc. that may cause this problem?
Since your problem is specific with Office program, it would be better to provide your question at Office Forum.
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=officeitpro
Roger Lu
TechNet Community Support

7110 and The specified domain controller could not be contacted

Hello,
Running a 7110 with 2010.Q3.2.0 Software Release and can't seem to join a Windows 2008 SP2 x64 Active Directory Domain.
I get the following:
error: The specified domain controller could not be contacted, or the domain is
invalid for the controller.
Does anyone know of any known bugs????

Click Help: Active Directory - there is a link to a registry setting you need to make.

Can someone please help me!! I keep trying to download itunes but get a message that and error has happened 2/3 and check window activity. Then it shows A sever with the specified host name could not-- and then it cuts off the rest of the message.

I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!

It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.

CFAJAXPROXY: "The specified CFC proxy could not be found."

{ColdFusion 8, latest, Windows.}
The following statement occurs (in an included CFM file):
<cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
The "crv2_js.cfc" file is indeed located in the same directory. (If you request it at the same URL, and enter the administrator password, a nice formatted description of the library and its methods dutifully appears, so it is there...)
But the error is:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
Looking also on the Administrator screen, I confirm that the directory is not mapped.
Other, <cfinvoke> calls have been used to a sister CFC-library in the same directory without incident. So I am confident that the message that I am seeing is somehow bogus ... but I do not yet know what sort of "bogosity" it must be.

Now here is something I didn't expect to see. When I turned on "extended error information" (or whatchamacallit...) I got this additional information in the displayed log:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
The error occurred in C:\Inetpub\wwwroot\NCPT\CRV2\cr_PrototypeManager.cfm: line 235
                                    <cfgridcolumn
                                     name="DefinitionIsLocked"
233 :                                     header="Is In Use"
234 :                                     type="boolean"
235 :                                     select="no">
236 :
237 :                                    </cfgrid>
(Ooh... formatted! Now ain't that slick!)
I took the liberty of pasting-in lines 231-232, which the debugging-output did not include. In fact, here is the entire block of code:
<cfgrid name="datagrid" pagesize="5" format="html" width="100%" height="200"
"cfc:proxy.GridSource_ReviewPrototypes({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{c fgridsortdirection},getPageSize())">
<cfgridcolumn
   name="ID"
    header="ID"
   display="false"    >
<cfgridcolumn
   name="TemplateName"
    header="Template Name" >
<cfgridcolumn
   name="PrototypeClassName"
   header="Prototype Class" >
<cfgridcolumn
   name="Description"
   header="Description">
<cfgridcolumn
   name="Enabled"
   header="Enabled"
   type="boolean">
<cfgridcolumn
   name="DefinitionIsLocked"
   header="Is In Use"
   type="boolean"
   select="no">
</cfgrid>
So... why on earth would an error like that be showing up at a place like this? (Removing the "select='no'," on the wild-guess theory that it might be "the odd man out," as-expected had no useful effect.)
My hypothesis here is that the "failure location" actually has nothing to do with anything: this is simply the last clause in the CFGrid construct, and the computer is now trying to place a call to this function:
<cffunction name="GridSource_ReviewPrototypes" access="remote" returntype="any">
<cfargument name="page"                 required="yes">
<cfargument name="pageSize"             required="yes">
<cfargument name="gridsortcolumn"       required="yes">
<cfargument name="gridsortdirection"    required="yes">
    <cfargument name="customPageSize"       required="no"     default="0">
Uh huh... straight out of a demo.
I thought I had just-now discovered the problem, as I was writing this, because the "bind" expression had two additional parameters which are not listed in <cfargument> tags. But, much to my surprise, it didn't fix it.
To be absolutely complete in my description:
In an included header-file, we have: <cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
On this (Windows) host, the file-name of the CFC file is "crcv2_js.cfc" and it is located in the same directory as both the cfm and the included cfm.
In the <head> portion of the main page, we have (in an in-line <script> tag):
var proxy = new ServerProxy();
    proxy.setErrorHandler(showError);
    proxy.setCallbackHandler(handleResult);
I'm starin' at this thing and starin' at this thing and everything I see is screamin' at me, "bogus!" 'Cept I know it can't be.
The generated page-source code includes the following, including a bit which I have highlighted in bold face. I don't know where that bit came from.
<script type="text/javascript">
ColdFusion.Ajax.importTag('CFAJAXPROXY');
</script>
<script type="text/javascript">
var _cf_crv2_js=ColdFusion.AjaxProxy.init(
'/CRV2/crv2_js.cfc','ServerProxy');
but it does seem plausible since the URL to the site-page (on case-insensitive Windows) is, indeed:
   http://tlcapps/crv2/cr_PrototypeManager.cfm
and, again, if I type in "http://tlcapps/CRV2/crv2_js.cfc" and prove that I do know the proper ColdFusion admin-password, I get a nice pretty-printed description of this library and its methods... including the one I am trying to call. It does exist.

The file aqq12s0m.sys could not be found during Win XP installation

When I try to reinstall XP pro I receive message "The file aqq12s0m.sys could not be found. press any key to continue." and when I press it, comp restarts.
Any clue about that file?

Hi,
is this the original recovery CD or a genuine Windows XP installation disk??
Following reasons for that problem:
- Disc is damaged or scratched or warped or simply not working
- CD/DVD drive has some problem
- Some piece of hardware does not work properly
- Memory could be faulty
Try to exclude these points and you will get the answer on that file.
Usually, such problem appears (I mean with a non-working file) when the CD is scratched or the drive does not work like it should..
Cheers

ADMDialog/iFontProblemWarning=The Adobe UI font could not be loaded

I have been getting this error in a pop-up box every time I start Photoshop CS6 - I acknowledge the error (click OK) and startup completes with no further problems I have looked for solution on the web to no avail (I've chased a few red herrings reinstalling ADMxxx fonts with no success).I have just now removed (moved to a safe location) the "ADM" folder from the Photoshop plug-ins list and error goes away. I understand ADM is Adobe Dialog Manager but can I live without it or should I attempt to fix it?

Have the same problem and fixed it the same way. Maybe an additional information: I am running Win8 and the error message came up right after a had the latest Windows update. Or are you a happy Mac user??
On some forums the rumour is spread, this has something to do with the amount if fonts installed in the OS. Nevertheless I had no fonts installed (or removed) between the last flawless start of Ps CS6 Ext and the upcoming error message. Just the Windows update ...
Would be nice if we had some respons from Adobe on this...

PDFMaker Server could not be loaded

When I try to create an Acrobat Pro 8 file from within Word, I get an "Acrobat PDFMaker" dialog saying "The Acrobat PDFMaker Server could not be loaded. Do you want to run the installer in repair mode?"
Cannot find this error in the KB.
I have already reinstalled CS 3 twice tonight. It's not working.
How can I get Acrobat Pro to work inside Word?
Rig:
Vista Ultimate 64 bit SP1
Intel Core i7@ 920 2.67Ghx
12G RAM, 1T hard disk with 900G available
Adobe Creative Suite 3 Design Premium

Hi all,
The information found in this link helped me to resolve the problem in minutes:
http://www.tech-archive.net/Archive/Office/microsoft.public.office.misc/2008-04/msg01538.h tml
Please let others know how you fixed your problems - the more possible solutions the more uptime!
Wordsmith2000

The specified cache entry could not be loaded during initialization

Similar Messages

Maybe you are looking for