The specified nodes are not clusterable

Hello,
I am trying to install RAC 10g,during the installation , i got error saying the specific nodes are not clusterable, i have checked below things on both nodes, node reachablity and node connectivity are successful.
ssh rac1 date
ssh rac1-priv date
ssh rac2 date
ssh rac2-priv date
Could you please help me, how to resolve this issue.
Thanks
Nitya
Edited by: user8773474 on Aug 28, 2009 8:32 AM

Hello Andy,
I searched the link to reward you, but i couldn't
Really thanks for you quick response,
Right now i can say helpful, i will download and try ,if it is working , then i will update you as correct.
Best Regards
Nitya

Similar Messages

  • Message: the specified nodes are not clusterable

    Hi,
    I am geting message "the specified nodes are not clusterable" at the time of crs installation on solaris 10.
    i have already configure ssh and configure properelly.
    please suggest.
    thanks
    Anup

    Hello IndiaDBA,
    The id on OS groups and users are the same on all nodes?
    Check Metalink note ID 338045.1
    Error:*** Alert: The specified nodes are not clusterable. This could be due to one or more of the following reasons:
    1. The user performing the install is not configured in an equivalent manner on all nodes.
    2. ssh and scp are not configured properly on all nodes.
    3. rsh and rcp are not configured properly on all nodes.
    Do a simple test before proceed the installation
    # Public
    $ ssh node1 date
    $ ssh node2 date
    $ ssh nodeN date
    # Priv
    $ ssh node1-priv date
    $ ssh node2-priv date
    $ ssh nodeN-priv date
    # Vip
    $ ssh node1-vip date
    $ ssh node2-vip date
    $ ssh nodeN-vip date
    Check Metalink note ID 300548.1 How To Configure SSH for a RAC Installation
    Regards,
    Rodrigo Mufalani
    http://www.mrdba.com.br/mufalani

  • Can't install ORACLE RAC on Solaris (specified nodes are not clusterable)

    Hi all,
    Could you please help with the Oracle CRS issue?
    During the installation Oracle CRS the OUI indicate that the specified nodes are not clusterable.
    The window appears and displays:
    "The specified nodes are not clusterable.
    The following error was returned by the operating system:"
    I am using 10gr2_cluster_sol.cpio.gz file.
    My Solaris 10 configuration:
    server - sun3
    bash-3.00# cat /etc/hosts
    # Internet host table
    127.0.0.1 localhost
    10.160.19.49 sun3 loghost
    10.160.19.50 sun4 loghost
    10.11.12.13 sun3prv
    10.11.12.14 sun4prv
    10.160.19.64 sun3pub
    10.160.19.65 sun4pub
    bash-3.00# ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.49 netmask fffffe00 broadcast 10.160.19.255
    ether 0:14:4f:0:64:82
    bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.11.12.13 netmask fffffe00 broadcast 10.11.13.255
    ether 0:14:4f:0:64:83
    bash-3.00# cat /etc/netmasks
    10.160.18.0 255.255.254.0
    10.160.19.0 255.255.254.0
    10.11.12.0 255.255.254.0
    bash-3.00# cat /etc/hostname.bge0
    sun3
    bash-3.00# cat /etc/hostname.bge1
    sun3prv
    server - sun4
    bash-3.00# cat /etc/hosts
    # Internet host table
    127.0.0.1 localhost
    10.160.19.50 sun4 loghost
    10.160.19.49 sun3 loghost
    10.11.12.14 sun4prv
    10.11.12.13 sun3prv
    10.160.19.63 sun4pub
    10.160.19.62 sun3pub
    bash-3.00# ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.50 netmask fffffe00 broadcast 10.160.19.255
    ether 0:14:4f:0:41:c8
    bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.11.12.14 netmask fffffe00 broadcast 10.11.13.255
    ether 0:14:4f:0:41:c9
    bash-3.00# cat /etc/netmasks
    10.160.18.0 255.255.254.0
    10.11.12.0 255.255.254.0
    10.160.19.0 255.255.254.0
    bash-3.00# cat /etc/hostname.bge1
    sun4prv
    bash-3.00# cat /etc/hostname.bge0
    sun4

    0) This error occur when I run .runInstaller
    All prerequisites check passed. The error window appears after clicking Next button in Specify Cluster Configuration window.
    1) I have changed /etc/hosts file as you have mentioned
    SUN3
    bash-3.00# cat /etc/hosts
    # Internet host table
    ::1 localhost
    127.0.0.1 localhost
    10.160.19.49 sun3
    10.160.19.50 sun4
    10.11.12.13 sun3-vip
    10.11.12.14 sun4-vip
    10.160.19.64 sun3pub
    10.160.19.65 sun4pub
    SUN4
    bash-3.00# cat /etc/hosts
    # Internet host table
    ::1 localhost
    127.0.0.1 localhost
    10.160.19.50 sun4
    10.160.19.49 sun3
    10.11.12.13 sun3-vip
    10.11.12.14 sun4-vip
    10.160.19.64 sun3pub
    10.160.19.65 sun4pub
    Also I have configured bge0:1 interface
    bash-3.00# ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.49 netmask fffffe00 broadcast 10.160.19.255
    ether 0:14:4f:0:64:82
    bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.64 netmask ffffff00 broadcast 10.160.19.255
    bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.11.12.13 netmask fffffe00 broadcast 10.11.13.255
    ether 0:14:4f:0:64:83
    2) I have removed loghost from /etc/hosts file
    3) Currently I do not have shared storage. I am going to use Storage Foundation to create a shared storage
    Also I was trying to test the machines using runcluvfy.sh command
    The output is the following:
    -bash-3.00$ ./runcluvfy.sh stage -pre crsinst -n sun3,sun4
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "sun3".
    Checking user equivalence...
    User equivalence check failed for user "oracle".
    Check failed on nodes:
    sun4,sun3
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    Pre-check for cluster services setup was unsuccessful on all the nodes.

  • The payment terms are not getting reflected in PO

    Hi,
    We are in SRM5.0 Extended Classic scenario.
    We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in  SRM system.
    But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
    Could you please suggest what may be the issue here.
    Best Regards,
    Siddappa

    Hello Siddappa,
    I am a little confused here with the scenario.
    I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
    So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
    So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
    However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
    So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
    I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
    Regards
    Pramod

  • System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

    Hi,
    I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
    now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

    Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

  • Error creating a new user profile service application: The specified database is not a valid synchronization database

    When trying to create a new user profile service application on a new SharePoint install I get the following error:
    "The specified database is not a valid synchronization database"
    The installation then fails and does not create the third database. 
    I found some threads with similar problems but it involved upgrading an existing db.  In this case we want to create a new one.  Here is the relevant ULS log info:
    Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
    Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
    Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
    Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
    The SP15_TEST_ENT_SyncDB database does not exist. 
    It will now be created.
    Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
    Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
    Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
    Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
    Validate Database: validating sync database
    Validate Database: validation failed: Error code -2
    Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database 
     at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()   
     at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)   
     at System.EventHandler.Invoke(Object sender, EventArgs e)   
     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database  
     at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()   
     at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)   
     at System.EventHandler.Invoke(Object sender, EventArgs e)   
     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
    The specified database is not a valid synchronization database   
     at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()   
     at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)   
     at System.EventHandler.Invoke(Object sender, EventArgs e)   
     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
     at System.Web.UI.Page.HandleError(Exception e)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
     at System.Web.UI.Page.ProcessRequest()   
     at System.Web.UI.Page.ProcessRequest(HttpContext context)   
     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    I Tried to create another one under a different name (databases also) and I get the same error. 
    The SharePoint instance has the march mandatory update installed.  The sql instance we are using is an existing SQL cluster for other SharePoint poc's. 
    Has anybody seen this issue before? 

    I had the same problem and could not figure out what was wrong for the longest time.  I then had the idea to check in the model system database to see if there were any extra custom tables in that database.  Any tables that are in the model database
    are put into any new database when it is created.  I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
    the user profile service application again and it worked with no errors

  • SQL SERVER - Error while executing SSIS package on specific environment : Connection manager - The specified module could not be found

    I have deployed my SSIS packages on SQL 2008 server.
    I have a .bat file which will invoke these packages and also the bat file is placed in the server where the SSIS packages are deployed.
    Scenario 1:
    I double clicked on the bat file to invoke the SSIS packages and ; this executed successfully
    Scenario 2:
    I have used the IBM Tivoli work scheduler(TWS)  to invoke the bat file which in tern will invoke the ssis packges; 
    but when i do this i am getting the below error
     Code: 0x8007007E
       Source: SSIS_Master_Event_Data_Transfer Connection manager "Config DB"
       Description: The specified module could not be found.
    Config BD is a connection manager which will get the connection string from the config file of the SSIS package.
    Please help me to resolve this issue.
    Regards,
    Prakash

    Check you TWS jobmanrc.cmd configuration file.   You may need to add a PATH environment variable in that file that includes your SQL Server file locations.   When TWS jobs are executed, they may not be executing with the same
    PATH variable as when you execute the SSIS outside of TWS.

  • Dboraslib.dll - Error 126 : "The specified module could not be found."

    Hi,
    After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
    The dev_disp trace file shows the following error:
    Please do help to resolve this problem.
    trc file: "dev_disp", trc level: 1, release: "640"
    Mon Aug 09 12:14:43 2004
    kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
    length of sys_adm_ext is 524 bytes
    ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    1
    intno      0
    make:      multithreaded, Unicode
    pid        2908
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
         shared lib "dw_xml.dll" version 1 successfully loaded
         shared lib "dw_xtc.dll" version 1 successfully loaded
         shared lib "dw_stl.dll" version 1 successfully loaded
         shared lib "dw_gui.dll" version 1 successfully loaded
    Mon Aug 09 12:14:48 2004
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3878]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2506872     (12472)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (372)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
    DpShMCreate: allocated sys_adm at 06440040
    DpShMCreate: allocated wp_adm at 06441B58
    DpShMCreate: allocated tm_adm_list at 06444478
    DpShMCreate: allocated tm_adm at 064444A0
    DpShMCreate: allocated wp_ca_adm at 066A8518
    DpShMCreate: allocated appc_ca_adm at 066AE2D8
    DpShMCreate: allocated comm_adm_list at 066B0218
    DpShMCreate: allocated comm_adm at 066B0230
    DpShMCreate: allocated vmc_adm_list at 066F6F00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 066F6F28
    DpShMCreate: allocated wall_adm at 066F6F30
    MBUF state OFF
    Mon Aug 09 12:14:49 2004
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
    <ES> 613 blocks reserved for free list.
    ES initialized.
    Mon Aug 09 12:14:52 2004
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3216
      argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1352
      argv[5] = -DLISTEN_PORT=1353
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=SXI
      argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
      argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
    ***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
    Mon Aug 09 12:14:54 2004
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 1
    Release check o.K.
    Mon Aug 09 12:15:33 2004
    ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
    ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
    ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-3224 (SIGUSR2)
    ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
    killing W1-3232 (SIGUSR2)
    ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
    killing W2-3240 (SIGUSR2)
    ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
    killing W3-3248 (SIGUSR2)
    ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
    killing W4-3256 (SIGUSR2)
    ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
    killing W5-3264 (SIGUSR2)
    ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
    killing W6-3272 (SIGUSR2)
    ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
    killing W7-3280 (SIGUSR2)
    ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:43 2004
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Mon Aug 09 06:45:43 2004
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3224 Ended         no      1   0             0                                                             
    1 DIA     3232 Ended         no      1   0             0                                                             
    2 UPD     3240 Ended         no      1   0             0                                                             
    3 ENQ     3248 Ended         no      1   0             0                                                             
    4 BTC     3256 Ended         no      1   0             0                                                             
    5 BTC     3264 Ended         no      1   0             0                                                             
    6 SPO     3272 Ended         no      1   0             0                                                             
    7 UP2     3280 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    since last update     total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:48 2004
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
    killing process (3216) (SOFT_KILL)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiSelClear: removed hdl 3 from selectset
    DpDelSocketInfo: del info for socket 3 (type=7)
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 456
    NiSelClear: removed hdl 4 from selectset
    DpDelSocketInfo: del info for socket 4 (type=9)
    NiBufClose: clear extensions for hdl 4
    NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 4 / socket 448
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (3172) (SOFT_KILL)
    Stop icman
    killing process (3196) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process lives  (PID:3172  HANDLE:472)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:49 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3172  HANDLE:472)
    [DpProcDied] Process died  (PID:3196  HANDLE:464)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:50 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:51 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:52 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:53 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:54 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:56 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:57 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:58 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:59 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:00 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:01 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:02 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:03 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:04 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:05 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:06 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3216  HANDLE:440)
    NiIMyHostName: hostname = 'cgnlpt036'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 5 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 5
    NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 5 / socket 368
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
    Good Bye .....

    Hi,
    Thanks for the reply.
    dboraslib.dll is properly installed - I checked the registry and physical location of the file.
    The problem was : Environment variable "Path" not being set properly for the "oracle jre".
    Solution:
    After setting the path, the dispatcher started to run properly without any problems.
    Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
    FYI - We are using WIN2K with SP4 and oracle DB 9.2
    Regards,
    Sridhar

  • The specified module could not be found. (Exception from HRESULT: 0x8007007E)

    Hi,
    We have an exisiting .NET MVC project which uses crystal reports versions 2008 (dlls of version 12.0.). No we have Crystal Reports 2011 for.NET SDK is installed and I've updated all the crystal related dlls (Enterprise.Framework.dll, CrystalDecisions.Chared, CrystalDecisions.Web ...) to newer version which is 14.0. After this upgrade, when I run application, I am getting the following error:
    The specified module could not be found. (Exception from HRESULT: 0x8007007E)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
    Source Error: 
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)]
       System.Reflection.Assembly._nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +0
       System.Reflection.Assembly.nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +40
       System.Reflection.Assembly.GetTypes() +28
       System.Web.Mvc.TypeCacheUtil.FilterTypesInAssemblies(IBuildManager buildManager, Predicate`1 predicate) +161
       System.Web.Mvc.TypeCacheUtil.GetFilteredTypesFromAssemblies(String cacheName, Predicate`1 predicate, IBuildManager buildManager) +63
       System.Web.Mvc.ControllerTypeCache.EnsureInitialized(IBuildManager buildManager) +115
       System.Web.Mvc.DefaultControllerFactory.GetControllerTypeWithinNamespaces(RouteBase route, String controllerName, HashSet`1 namespaces) +58
       System.Web.Mvc.DefaultControllerFactory.GetControllerType(RequestContext requestContext, String controllerName) +634
       System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +58
       System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118
       System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46
       System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63
       System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13
       System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8770194
       System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
    We have another ASP.Net project, which is working fine after I update older crystal dlls to newer ones. This project is working fine.
    Thanks in advance

    This error I am getting, after I update the "CrystalDesicions.Web.dll" from version 12 to 14.0. Any I dea on this?
    After, I verified with fusin log and ProcessMonitor, they are reporting on this:
    path to BusinessObjects.Licensing.KeyCode.Decoder.dll  is not found. Does this dll is used by CrystalDecisions.Web.dll?
    and I don't have any mixed reference.
    Any help?

  • One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.

    I create a brand new plan based on a template.
    A task in that plan has a team resource assigned. the task is fixed work. The PM may change the work and duration but not the team resource.
    The plan is published.
    I delegate my self as a team resource: and try add myself to team task in the timesheet area (using insert row). I can choose some tasks and the add. Most tasks throw this error. This happens if nothing on the plan is changed - it is brand new - minutes
    old
    One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
    How can I stop the alert:
    One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
    Trying to stop the swap to Salesforce - but the errors keep a coming

    oooch - I can fix it - I need delete the task and recreate it. Which is amazingly tedious as I cannot see if a task needs recreating or not. There's 10 template plans and an average of 200 tasks - then I have to rename the template - the assign the
    new template to the EPT - this will be a long night; with only complaints at the end.
    Trying to stop the swap to Salesforce - but the errors keep a coming

  • SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

    I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
    have fixed the problem (of I don't understand the fix)
    Configuration
    SCCM 2012 SP1 5.0.7804.1000
    WADK 8.100.26629.0  < Suggested Fix
    Server 2008 R2
    SCCM Administrator with UserID = SCCMAdmin 
    Steps / Fixes I have followed
    I have configured a administrative share
    \\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
    EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
    SYSTEM has Full Control 
    <Suggested Fix
    SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
    SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
    Local Administrators (the local machine administrator) has Full Control 
    <Suggested Fix
    <o:p></o:p>
    Another Fix is to explicitly grant all permissions to the SCCM Administrator
    <Suggested Fix
    >Administrative Users ...
    Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
    Another suggestion I was able to glean was to Specify the Network Access Account
    so I configured SCCMAdmin as the Network Access Account.
    Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
    I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
    E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
    To double check,
    I computed the Hash on the Install.WIM located in the Sources directory and compared with
    the computed Has Tag for the Install.WIM on the ISO Image  ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
    I tried to load the images into SCCM 2012 using the "Operating System Installers" option
    UNC to installer
    \\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
    Then I receive the lovely message <o:p></o:p>
    "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path"<o:p></o:p>
    <o:p> </o:p>
    From
    C:\Program Files (x86)\Microsoft Configuration
    Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
    <o:p> </o:p>
    \r\nSystem.Management.ManagementException\r\nGeneric failure \r\n  
    at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
    errorCode)
       at System.Management.ManagementObject.InvokeMethod(String
    methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
       at
    Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
    methodClass, String methodName, Dictionary`2 methodParameters, Boolean
    traceParameters)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Failed to get the image property from the source WIM
    file due to error 80070002";
     ErrorCode = 2147942402;
     File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
     Line = 586;
     Operation = "ExecMethod";
     ParameterInfo = "SMS_OperatingSystemInstallPackage";
     ProviderName = "WinMgmt";
     StatusCode = 2147749889;
    \r\n<o:p></o:p>
    What am I missing ????  I assume something simple but, darn I'm stumped!!!

    Hi,
    Configuration Manager version
    Windows AIK or Windows ADK Version
    Windows PE versions for boot images customizable from the Configuration Manager console
    Supported Windows PE versions for boot images not customizable from the Configuration Manager console
    System Center 2012 Configuration Manager with no service pack
    Windows AIK for Windows 7
    Windows PE 3
    None
    System Center 2012 Configuration Manager with SP1
    Windows ADK for Windows 8
    Windows PE 4
    None
    System Center 2012 Configuration Manager with SP1 and cumulative update 2
    Windows ADK for Windows 8
    Windows PE 4
    Windows PE 3.11
    System Center 2012 Configuration Manager with SP1 and cumulative update 3
    Windows ADK for Windows 8
    Windows PE 4
    Windows PE 3.11 and Windows PE 5
    System Center 2012 R2 Configuration Manager
    Windows ADK for Windows 8.1
    Windows PE 5
    Windows PE 3.11
    Please try to install the Windows ADK for Windows 8.
    http://www.microsoft.com/en-us/download/details.aspx?id=30652
    For more information, please review the link below:
    http://technet.microsoft.com/en-us/library/gg682187.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error message @ Win 7 Pro start up "There was aproblem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."

    Error message @ Win 7 Pro start up "There was a problem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."
    This error message appears every time I start (boot) my computer and windows starts (Firefox is not running at start up). Firefox 15.01 functions properly otherwise.
    This started after I installed the 15.0.1 patch.
    I uninstalled and reinstalled Firefox but the problem remains. Google search for "ofpviaowu.dat" came up with "2012-08-29 Firefox Release 15 Startup Crash Report" as the only listing.
    Is this a Firefox issue?

    hello QAMgr, i'm not aware of this file being a part of firefox & also find it slightly suspicious that there are no more google search hits. maybe this is malware related... could you do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes]?
    [[Troubleshoot Firefox issues caused by malware]]

  • The specified module could not be found

    This error box pops up when I try to open an image     (the specified module could not be found) also the icon for photoshop
    would not respond on the taskbar.I can open my images in other programmes,would reinstalling photoshop be a good idea.
    Thanks.

    Using PS cc, the problem relates to all images as they are set to open in PS, and the message appears immediately,.i have noticed that my start up screen has changed in appearance I am using a Asrock board - could be a coincidence but the problem has only started this week 08.02.15
    I am using windows 7 home premium
    Thanks.

  • An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to ad

    An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
    Did somebody get the same problem?

    It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
    That the report generator outputs to an old-old version of PDF bears this out.
    Wiki articles on PDF are very nice for those high level intro summaries.
    To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
    Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
    You can change the email2fax application to one that can deal with older PDF versions.
    You can change the report generator to one that can output to the ISO Standard.
    (Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
    Be well...

  • DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

    Hello Everyone,
    We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found."  We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
    Kindly help if anyone has faced the same problem with SAP BO 4.1.
    Thanks and Best Regards,
    Ghosal

    Hello Everybody,
    The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
    Thanks for your support.
    Best Regards,
    Ghosal

Maybe you are looking for

  • Logs for planning and work space application

    Hi, where can i find the logs for the planning and workspace application. hyperion is installed in HYP_Home dir--- please say me where i can find the logs thanks ram

  • Can't open JPGs into ACR from Bridge - Windows XP

    I was using CS3 on a Windows XP Machine, just installed the latest updates from adobe (to 2.0.0.10 I believe) and can no longer open JPGs in Camera Raw by hitting CTRL-R. I already tried uninstalling and reinstalling all the adobe suite, (back to 2.0

  • Marketing: Creating a new partnet

    In various Marketing screens like Campaign, Events, etc, noticed that we have provision to associate a partner to the marketing objects. We would like to know, how do we create / register such partners ? regards Yj

  • Adobe Reader X 10.2.0, waiting for new MSI package

    I can't seem to find anything out about the next yearly update of Adobe Reader.  There are supposed to be quarterly and yearly updates for Reader, but Adobe don't seem to be sticking to the schedule. I need the next full MSI package to come out so th

  • Record level commit in a multi record block

    Dear all, i have a multi record block in my form (only one block) after entring record the save buttons commites the form if any error is raised then total commit processs stop for example if DUP_VAL_ON_INDEX is raised what i want is that the form sh