The specs for the NI model 4552 DSA card realtime octave addon are listed as max 10KHz band for one-third octave on 4 chan

nels (20KHz for 2 channels). Does this limitation apply only for real-time operation? In other words, if I was satisfied with non-realtime analysis of a steady-state input signal, could I get higher bandwidth, say, up to the 50 KHz one-third octave band?DonH,
This is a good question. The analog sampling is real-time and hardware controlled regardless of whether or not you are doing hardware analyzing. You are not at risk for missing any data points or affecting the sampling speed. If your computer is not fast enough to analyze the data as it comes in, you could stream the data to disk for analyzation once the acquisition is through. You will know the computer is not fast enough if you got a buffer error during the acquisition. Basically, you are not compromising the quality of data at all. It will just take longer to get results.

Similar Messages

What is the correct model no Bluetooth card for early 2005 G5

Hi, Could someone please tell me the correct model no Bluetooth card for an early 2005 2.0Ghz Duel Processor PowerMac G5 (Serial CK5300SCRTY), i have two model no's but am confused about the correct one, one is A1115 and the other is A1044.
Also is the correct Airport Extreme card model no A1027 for this mac?.

Airport Extreme Card (Europe, Asia, Australia) PART NO: M8881Z/A, Model No. A1027
Apple Bluetooth Card for Early 2005 G5, PART NO: 922-6784, Model No. A1115
Apple Bluetooth Card (REV 3) for G4, iMac, eMac, G5 (through late 2004) PART NO: 922-6876, Model No. A1044
Do not confuse the G5 A1115 with the Mac Pro A1115.

I have music files by the same artist but they are listed in itunes in more than one album hod can i add then to just one album pf that artist

I have music files by the same artist but they are listed in Itunes in more than one album hod can i add then to just one album of that artist I am using windows 8.1 .

iTunes will group songs into an album when:
All songs have the same value for the Album and Artist field, or
All songs have the same value for the Album and Album Artist field
All songs have the same value for the Albumfield and the Part of a Compilation flag is checked.
If you want to group all the songs by one artist into a single "album" you can do so by following one of these rules. However, it may be more useful to create Playlists to group music like this and retain the original release information. One Smart Playlist for each artist you're interested in would meet this need without over-writing information about the source albums.

I have sent in a question but don't think I worded it right. I have 3 email accounts. The all work fine. My problem is that I set up a "notication" the same way on all 3 but incoming emails are only notifed to me (alerts) on one of them.

How do I get notifications of incoming mail? I have set this up on 3 accounts and the "beep" only works on incoming email for one of the 3 accounts. The emails come in fine but I have to open up the phone to see if I have any messages.

Have you looked on all the pages of your iPod? Have you looked in all your folders? Have you you tried finding the apps using the iPod's search page.
PS: Offering points in advance is a violation of there terms of service for this forum. Perhaps it's why you have not received any other answers so far,

We get error messages when trying to download in-app purchases on the iPad using an iTunes card.This worked on other ipads. Just not this particular one.

We get an error message when trying to download in-app purchases on the iPad using an iTunes card. This worked on other ipads. Just not this particular one.
We have tried deleting and re-installing the apps and attempting the in-app purchase again. Still get error messages. Any suggestions?

hello Mac.INXS, please [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from mozilla.org]] and then try logging into AMO again.

I hate SOOO many things about firefox 4 that I'm ready to switch to another browser. The new version is ridiculous!! Y'all are looking more like Microsoft with this one!

(1) I can't give feedback because you keep telling me i don't have the latest version. I DOWNLOAD/REINSTALL and you contniue to tell me the same thing!!!
(2) I can't stand not being able to go back by clicking the arrow. I keep having to right click and select where I want to go!
(3) I exited through the menu to save my active pages and when I reloaded, it started over!!!
(4) I continually have to turn off the bookmark toolbar and turn it back on to get my buttons back!
(5) Whenever I select "open in new window" a blank window opens and nothing loads!
The advantages that I had when using firefox are gone! I will be trying other browsers. I think it's time to try chrome or safari.
It's really too bad you lost what you had. I was a HUGE supporter of firefox, but version 4 is terrible!!!!

Regarding #1, your post says you have a beta version of Firefox 4. That may well be incorrect, but that is why the site says you do not have the latest version.
Losing graphics on the bookmarks toolbar and not having a working back button are not normal, but I'm not sure whether you want to troubleshoot Firefox 4, roll back to Firefox 3.6, or just move on.
How can we help?

Need java script 6.26 to use banking software keep getting "the connection was reset" error Java appears on addon blocked list

I am trying to use Team One Credit Unions CU@home to access my accounts. Their support team tells me I need Java script 6.26. I show that on my add on list but it also states Java is blocked on the blocked software list. How do I get Java script running so I can do my home banking or at least test it to be sure that is the issue. I have tried running this program with Java enabled and disabled with the same results.

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
See:
* http://kb.mozillazine.org/Java
* http://kb.mozillazine.org/JavaScript
Java 6 U26 is about the Java plugin.
You can see in "Tools > Add-ons > Plugins" if the Java plugin is installed and also on the about:plugins page via the location bar.
* http://www.java.com/en/download/help/testvm.xml - How do I test whether Java is working on my computer? - 1.4.2_xx, 1.5.0, 6.0

Under the movies radio button, only 8 of 460 movies are listed

After my latest update (12/24/12), when I have selected "movies" in the dropdown menu on the left corner of itunes and select the movies radio button, only 8 of the 460 movies in my itunes library are shown. The same eight are the only ones shown when I select the "unwatched" button. Where the others appear, however, is under the "home videos" and "list" bottons. Why are the videos missing from the "movies" button, why were they classed as home videos, and how do I reclassify them as movies?
Thank you,
Dr. Mark

I found this answer under another post:
figured it out:
Select one or more movies in your collection. Choose Get Info. Select the Options tab and change Media Kind to Movie. The modified items will alphabetically show under Movies when you are in the Movies section of iTunes 11.

Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks

Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks.

Thanks for responding me,
I just got this info from the link that you provided me but is there any model name or model number for it?
or any 2.5 would be work?
Thanks again.

How can I know the extact model of burner for my powerbook?

If I want to buy a new burner for my powerbook, how can do I know the exact specs to order it. My computer is a PowerBook G4 17", Machine Model 5,9 Titanium. And where can I buy one so I can install it myself. Please, it´s urgent. Thankyou.

Hi, Alex. Your Powerbook is not Titanium but Aluminum. There was never any 17" Titanium PB.
The model of your current optical drive will be shown in System Profiler and in Disk Utility. But because your Powerbook is now a four-year-old model, the drive in it is probably discontinued now, and there are newer, better, more versatile drives with which you could replace it. A good source for one is OWC:
http://eshop.macsales.com/staticpages/Framework.cfm?page=superdrive/sdl_powerbook_g4al.html

Trying to find a Hard case for my MB466LL/A Macbook anyone know where I would find one. Also is this the only model number for this Macbook? Is there another Model number that the case would fit?

PLEASE HELP!!
Trying to find a hard case for my Macbook (MB466LL/A). I cant find anything on the Web? Is there another model number that would fit mine? Any help would be great.

These are the specs for your computer:
http://support.apple.com/kb/sp500
Amazon has a number of products listed. The key is to specify a 13 inch Macbook, not the model number,

Somewhat confused about what RAM to get for PB G4 (the DDR2 model)

Hello. This is a long post since I'll try and explain in great detail what the problem is. I've purchased a refurbished 15.2" Power Book G4 off ebay the other day, it is the last 15 inch powerbook G4 apple released in October '05 since it has DDR2 RAM.
I haven't got the laptop yet, but figured I'd think ahead and get some more RAM for it to max it out. However I'm in a confused state of mind now as to what RAM will actually work in the laptop. On the Apple specification page for the laptop (which also lists the 1.67ghz 17 inch and the 1.5ghz 12 inch), it states for the 15 inch that it works with:
"512MB (single SO-DIMM) of PC2-4200 DDR2 SDRAM running at 333MHz; two SO-DIMM slots; support for up to 2GB"
Is that correct though? PC2-4200 RAM is 533MHz, not 333MHz. Or at least all the PC2-4200 RAM I can find is running at 533MHz. The 333MHz DDR2 modules are called PC2-2700. The other odd thing is, I use lowendmac.com a lot for specifications since I find they tend to list more details than Apple generally do (or at least they tend to go into more detail). On the page for the same laptop they state:
"RAM: 512 MB, expandable to 2 GB using 533 MHz PC2-4200 DDR2 RAM"
So they are apparently in agreement with my train of thought here. Not that I'm disagreeing with the official Apple specifications of course, it's just really confusing. Now I know I need SO-DIMM RAM, so I went onto an online retailer I generally use for this sort of stuff and found some Kingston value ram real cheap:
1GB, SO-DIMM, PC2-4200 533MHz, Non-ECC CL4 Unbuffered 1.8v module. Model number KVR533D2S4/1G.
Is this going to work in the laptop? If I believe Lowendmac.com, it will. If I believe Apple specs, it probably won't, or at least it may cause undesirable operation. Just to see what Kingston had to say on this, I went onto Kingston's website (valueram.com), I used the configurator search function and put in powerbook g4 as model, and it showed me a list of powerbooks. I picked mine (15 inch using DDR2) and sure enough it came up with the right page, and listed two RAM modules Kingston sell. A 512mb (of which I'll ignore), and the 1GB (the one I want).
The 1GB module was model number KTA-PB533/1G. Now just looking at that suggests to me that it is 533MHz, since it has 533 in the model name (and a trend with Kingston model numbers is to put the speed in the model name). Just to be sure though I did look for some detailed specifications but oddly enough I couldn't find any for that RAM module on their website so I googled it instead, and came up with several websites suggesting that it was 533MHz.
So, what should I do here? It would seem Apple's specs saying 333MHz was wrong, however I've got two RAM modules by Kingston here and they both appear to have the same specifications except one is obviously specifically for the powerbook, the other is just for generic laptops. So unless the one specifically for the powerbook is a different shape or something I can't see any reason why I should should pay a lot more money for the specific model, when I can get the apparent same exact RAM module for a bargain.
This is, confusing.

Strong recommendation to not go 'cheap' on the memory. Powerbooks are particular about the quality of memory, due primarily to the way Apple manages power on the memory bus. While some memory can meet Apple's published specs, it can fail in use. if you scan these discussions, you'll find people who have tried the KVR (Kingston value ram) memory and it has not worked for them. If you want to try it, suggest you get it from someplace you can return it and get your money back.
As already mentioned, Crucial (also sold as Micron) and Samsung are two brands that work reliably. Regular Kingston memory works well too. Crucial guarantees their memory will work when chosen from their memory selector at http://www.crucial.com . You can usually find a discount coupon on the web too. Samsung you buy through distributors, and I'd also recommend OWC at http://www.macsales.com . Kingston you already know is at http://www.kingston.com . You can scan the discussions for other brands that have worked (like Hynix, mentioned in the prior post, for example).

HT201364 Hi, I have all the specs for installing Mavericks but it wont do it. Would upgrading first to Mountain Lion help?

Hi, I have all the specs for installing Mavericks but it wont do it. Would upgrading first to Mountain Lion help?

Are you sure?
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
A. Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

***CALLING ALL MACBOOK AIR USERS*** Will the base model of the 2013 Macbook Air 11" be enough for my needs?

Ok,
This is my first post to this forum.
I have a Late 2011 i5 Macbook Pro. I used this last year during college but the weight was just unbearable. I have decided this year to upgrade to a Macbook Air. Here is my question.
I am starting uni and will be studying Nursing and so I will not be using any heavy software or progaming etc.
The only thing I will use is Office for Mac and browsing. I normally keep around 15 browser tabs open whilst I research.
I also like to download so I would also like Vuse on my Macbook too. I own an external hardrive and so memory isnt a big deal (unless it makes a difference to the performance of the mac itself, Sorry im not great with this stuff)
Do you guys think the base model of the 11" Macbook Air (1.3ghz, 4GB ram, 128GB SSD) will be enough for my needs or do you think I would need to custom build it (1.7ghz, 8GB ram, 128GB SSD)?
My boyfriend thinks for what im using it for the base model will be fine but I dont want to get it to find that its not enough as my main concern is lag but I also do not want to pay extra for something which isnt going to be fully used (ie my current Macbook Pro).
For those of you who do have the 11' Macbook air, how are you finding it? Also, this will be my main computing device, I am selling my Pro but am thinking of buying the wireless keyboard and trackpad so I can connect to an extenal monitor whilst im at home.
Thank you guys in adavnce for any answers.

I too have a 2011 mackbook pro and I also have a mid 2012 mackbook air 128 gb ssd and 4 gb ram , I am probably goint to sell the pro because I just don't use it anymore . If you intend to do heavy multi tasking 8gb ram as suggested by a previous poster might be worth the extra money.

The specs for the NI model 4552 DSA card realtime octave addon are listed as max 10KHz band for one-third octave on 4 chan

Similar Messages

Maybe you are looking for