The speed will reduce when using at the same time a lot of global variabl?

It's seem like that when i use a lot of global variable. Is it correct?

Take a look at these threads (tagged as Action Engine) to learn about alternatives to Globals.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • How do I customize the "Navigation Tool Bar" by adding the print ICON so that the ICON will remain when I close the browser?

    I have tried SEVERAL times to customize the "Navigation Tool Bar" by adding the print ICON. Every time I do this it works until I close the browser then I have to re-add the ICON the next time I open the browser. How do I make the ICON stay from session to session?

    See [[toolbar keeps resetting]].

  • HT204406 I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

    I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

    You will need to locate where you itunes library is and then relink one of the songs, itunes will do the rest. So if your itunes library is on an external hard drive or something like that. When you get the error message click yes you would like to locate it. then navigate to the external hard drive where the itunes libray is and locate that particular song. Once you have linked one, itunes will ask if you would like it to locate the rest, click yes and it will find the rest of the files if they are in the same location.

  • I want to use the speed dial extension when I start firefox. I have the option checked in speed dial settings but firefox does not open to the speed dial. How do I get this to work?

    I want firefox to open up to the speed dial add-on so I can use it as my start page. In the speed dial options I have checked the option to start firefox in the speed dial but when I open firefox it doesn't open the speed dial.

    Sorry, I don't use that add-on, and I don't see a SpeedDial support forum listed on the download page. <br />
    Here is the SpeedDial homepage. <br />
    http://speeddial.uworks.net/
    http://speeddial.uworks.net/manual.html

  • Will the indexes be ignored when using IMPDP...TABLE_EXISTS_ACTION=SKIP?

    Hi guys,
    11gr2
    suppose that i have a .dmp file which has tables, indexes, and data,
    and i also have a schema A which already contains tables and data, without indexes
    is it possible to use IMPDP to import(or say create) all indexes from .dmp to schema A?
    the relevant question is, when using IMPDP...TABLE_EXISTS_ACTION=SKIP, if the table already exists, will IMPDP ignores the relevant indexes creation?
    thank you!!!

    thanks for the reply.
    actually, i have imported over 100G data to the new server, but after look into the new server, most of the indexes are missing somehow, i don't want to drop the schemas and re-import, it will cost me a whole day to finish, any suggestions?
    many thanks.

  • Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  need help

    I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  But when I have my external hard drive plug in the song will play with no problem.  What do I need to do to play my music without having the external harddrive plug in ????????  Please help

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

    I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
    Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

    The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
    Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
    In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
    If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • What does it mean when a box pops up saying "The song could not be used because the origional file could not be found. Would you like ot locate it?"

    A  while ago, I was cleaning out some old pictures and music from my  computer. I noticed there were a lot of songs that I did not recognize,  and they had nothing to do with my itunes. I figured my step-dad or  sister might have put those songs on my computer or something. So I  deleted a few of them. The next day or so I realized all my music was  gone from my itunes. I still had the account but everything was wiped  clean, my music and playlists. I plugged in my ipod hoping it would  restore all my music but nothing happened, I still had my music on my  ipod and my cell phone. A friend of mine took my ipod, and put all of  the music on a hard drive, gave me the hard drive and I transferred all  of it in a folder onto my desktop. Then I drug that entire folder into  my itunes library. When I click to play a song through itunes a box pops  up and says "The song could not be used because the original file could  not be found. Would you like to locate it?" When I click on the song to  play it in the folder, it will go to itunes and then play it through  there. But I cant just go click on the song in my itunes and play it.

    It means the media is not where iTunes expects it to be.
    iOS devices are not and have never been backup devices.
    Are the files in question still on the computer?
    If not, you should restore them from the backup of the computer.  You do have a backup, correct?

  • When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?

    When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?

    Hi, thanks for the answer, I did that already. Unfortunatly this doesn't help me at all, as I often forget to check the menu. For me composing the message is writing the text, the subject, the person to who is addressed and than press "send".
    I often forget to check the "from", and this is a problem because the software select itself one of the accounts.
    Isn't there a way at least to put as a default a blank field instead of one of the accounts? or an account which doesn't work so if I forget to specify the "from" I will be rnotofied that the message can't be sent.
    I guess this could be a rather common problem for many people!
    Thanks
    Sergio

  • Can we set the dynamic data source when using getReportParameters() ?

    Hello!
    I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
    I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
    reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
    reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
    setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
    reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
    I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
    Regards,
    Stephanie

    report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
    We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
    This should load the saved report identified by report_id and you can get rid of javascript
    Regards,
    Vishal
    http://obiee-oracledb.blogspot.com
    http://www.packtpub.com/oracle-apex-4-2-reporting/book
    Kindly mark the reply as helpful/correct if it solves your problem

  • Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

    please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT1551 When using Airplay, the display on my tv isn't being fully used (its not taking up the full widescreen tv display). How do I fix that issue?

    When using Airplay, the display on my tv isn't being fully used (its not taking up the full widescreen tv display). How do I fix that issue?

    Intermittent issues will point to a local network/wifi issue.
    Reboot ATV and router, make sure both are up to date
    Try ethernet
    The home sharing connection will cut out if the iMac goes to sleep.

  • CDPOS for the moving avenge price when using MIRO, MIGO & VL31N etc.

    Hi
    Is there a way of tracking all changes with CDPOS for the moving avenge price when using MIRO, MIGO & VL31N etc.
    We can show changes for MR21 in CDPOS but we need to reflect all changes made to the moving avenge price for MIRO, MIGO & VL31N etc. We need to run a report that will show all these changes.
    We run a report to look at all the change records for Moving Avenge Price, We use tables CDPOS & CDHDR, then Change the document Object for both tables to material, so when the report is run you can identify the material by the object value field
    u201CIf you look at CDPOS the fields where reading the data from in the u201CNew Value fieldu201D is CDFLDVALN when I do an F1u201D
    u201CIf you now check MBEW on the u201CMoving Avenge Price fieldu201D, the data reads from VERPR which is the field we need to reflect the changes. If we can change this then the report will worku201D
    Can you help please?
    Edited by: Derrick smith on Nov 28, 2008 1:51 PM

    Hello Jürgen,
    Thank you for your quick reply. I read the note -- it describes the symptom perfectly, and gives example cases which match our situation. However, no solution or recommendation is given. Does it mean that this way of valuating cancellations is not seen as a malfunction, and cannot be changed?
    Thanks in advance.
    Regards,
    Sergei

Maybe you are looking for