The SSL support feature is not properly configured. Https is not available.
Hi all
We get the following warning message even though we are not using SSL.
"The SSL support feature is not properly configured. Https is not available."
I tried with the following parameter set to false in the MobileEngine.config, still the same warning occurs for each synchronization done. But the sync works fine.
MobileEngine.Security.SSLSupport=false
Had any body come accross this one, if so please let me know.
Thanks
Raj
Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter <b><i>MobileEngine.Security.SSLSupport=false</i></b> but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar
Similar Messages
-
I am unable to open the latest update (10.4) iTunes not properly configured
when I attempt to open it says iTunes was not properly configured and then close - I can't reinstall 10.2 since 10.4 in installed; it won't repair because mid-way thorugh it pops up "itunesresources is not an accessible file... make sure you have access to this file" and stops the repair.
any thoughts?
I HAVE used 10.4 since upgrading - I shut down my computer; when I rebooted a few days later, this is what happened...Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Dim Browser Service Button is not properly configured
I have created a report in Web Analysis Studio with a Dimension Browser service button, but when I open the report in Workspace the service button does not work. I am getting the following error message. "Dim Browser Service Button is not properly configured" Please let me know if I can use the Dimension Browser service button in Workspace.
Edited by: user9321517 on Mar 11, 2010 9:28 AMVersion 11.1.1.3
In Desginer mode I added services to my view
I choose dimension browser from the options
selected the data source and changed the title.
When I open the report in Workspace I receive the error that its is not configyred properly
Please help -
Scrolling of dinamani site in firefox using key board not properly configured?
scrolling of dinamani site in firefox using key board not properly configured?
by using down arrow i am unable to scroll
instead it goes to end of page
previously ie. about 4-5 months back this problem was not thereYou may have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox -
How do I turn off the auto lock feature. I have only timed options. There is not the "never" option available.
I've got options for 2, 5, 10, 15 minutes and Never. Have you got an Exchange email account on your iPad ? 'Never' can be removed so as to protect a company's potentially sensitive email - they may not want the iPad being left/stolen with the emails on it accessible. If you remove the account the Never option will probably reappear
-
Ever since last sunday, whenever I try to purchase an app from itunes, I always get this error explaining that I cannot establish a secure connection. I made sure TLS 1.0 and SSL 3.0 were enabled in options and I made sure the firewall was notblocking itunes, and I made sure that the host file was not blocking itunes.
I've done everything, please help?I have become ridiculously desperate. Itunes works for everyone else on my connection excepr e. I'VE TRIED EVERYTHING. I UNINSTALLED ALL SECURITY SOFTWARE AND CHECKED MY HOST FILE. NOTHING IS WRONG AND STILL ITUNES DOWN RIGHT REFUSES TO WORK. SOMEBODY PLEASE HELP ME!!!
-
since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
Just bought an IPod Classic and put 3 songs on my iTunes account - 1 purchased and 2 from a CD. I can't sync and the screen shot shown in the help section doesn't ressemble my scren views. i have now been on hold for 55 minutes despite a mesage saying "15 minutes or more" that implied a much quicker experience. This is really an unimpressive begining.
Just bought an IPod Classic and put 3 songs on my iTunes account - 1 purchased and 2 from a CD. I can't sync and the screen shot shown in the help section doesn't ressemble my scren views. i have now been on hold for 55 minutes despite a mesage saying "15 minutes or more" that implied a much quicker experience. This is really an unimpressive begining.
-
If Premiere Elements 8 does not properly exit or does not restart, try this
Pending a fix or advice from Adobe, I've written a tiny program to help with problems of Premiere Elements 8 not shutting down properly.
"PE8 Runner" is a small utility which...
- Asks you whether you want to run Premiere Elements 8.0 with or without the welcome screen
- Checks after you close the program whether it really has closed, or whether its process is still running
- Asks you whether you want to terminate the unclosed process (so you don't have to use Windows Task Manager to do it).
INSTALLATION
None. You can run PE8 Runner.exe from anywhere on your PC. But it assumes you have Premiere Elements installed
in the default location (C:\Program Files\Adobe\Adobe Premiere Elements 8.0)
USE
Run PE8 Runner.
Answer yes or no to the question about using the welcome screen.
(If you choose not to use the welcome screen you will go straight to the program
and then you must open or create a project using the normal menu).
Use Premiere Elements 8 as normal.
After you close Premiere Elements 8, about 10 or 20 seconds afterwards
you may see a window pop up telling you that the Premiere Elements process
is still running (and using your PC's resources), and asking you if you want
to terminate the process.
Unless you are in fact still using the program, answer "yes".
LIABILITY
The author (me) has developed and tested the program on a virus-protected system
using Windows XP SP3. Every precaution has been taken to ensure that
it is reliable, but it's up to you to choose whether to use it or not, and the author
accepts no responsibility for the outcome.
Please test it on an unimportant project before using it on something real.
I have not been able to test it on other versions of Windows and would be interested in any reports.
Download link http://www.fileden.com/files/2007/9/22/1451533/PE8%20Runner.zip - it's a small download. Source code is included.I really can not understand their logic. It is showing in Task Manager because the process (Adobe's exe) is still running and using the CPU. I know this because it causes a slowdown on my system as well. They are either assuming that Task Manager is reporting a ghost so it is an OS system, or they are claiming that they are making a call to a Microsoft function in a redistributable .dll or a function in a compile time library written by Microsoft, and that function is not operating as specified by Microsoft.
I know that it isn't a ghost report; the process is running. If it is a failure in a .dll or library, Adobe will still have to issue an update to us after reporting it to Microsoft and MS putting out a developer's update. We can not report it to Microsoft because we do not know what functions they are calling.
It really sounds like their application is not distributing the exit call to all of its processes. Without a design map and the code, it is all conjecture and I really shouldn't be guessing at what I really don't know.
Based on how many folks all see this, I can't imagine how this slipped through testing. Oh well, it did and most organizations have one slip through every now and then. The real important thing is how Adobe responds to the discovery. I personally would be happier with a "We have been notified of this issue and our developers are working to recreate it and then correct any problems we identify." It sounds like tech support has been outsourced and is too far removed from the situation to really respond with anything more than deflection. I have run into this with Digital River and their overseas call center. They could answer by the script, but they really could not get to the folks who could provide answers or solutions. This kind of support is what turned me away from a large scale installation of Adobe consumer applications. I have found better stability and support with the professional line of products.
I am looking forward to fix for this and any other issues. PE is fun to play with.
KK -
Outer case not properly closed causing cds not to eject.
Hi
I have noticed that the top right hand side of the case is not completely secure. Also the 2 audio ports grey plastic surrounds are cracked so it looks like the back case wasn't put on correctly in the manufacturing stage.
This causes some cds not to eject on their own, in order to get them out I have to hold the case together.
The mac is still under warranty but I dont really want to send it off for x amount of weeks, its there anything that I can do?I have noticed that the top right hand side of the
case is not completely secure. Also the 2 audio ports
grey plastic surrounds are cracked so it looks like
the back case wasn't put on correctly in the
manufacturing stage.
This causes some cds not to eject on their own, in
order to get them out I have to hold the case
together.
The mac is still under warranty but I dont really
want to send it off for x amount of weeks, its there
anything that I can do?
There is nothing that you can do without risking further damage or loss of warranty. Nevertheless, this doesn't sound like any big deal - getting the back re-secured so that you can use your optical drive (the only problem you've noted) is not something that would take "x amount of weeks" but is something that your local AASP could do on the spot in a few minutes. Make an appointment, and take it in. I can't imagine why you'd need to "send it off" anywhere. -
The all windows feature is not functioning properly
When I used the all windows feature ( via gesture, hot corner, or key (F3)) only the minimized windows are represented. The open windows are faded to the background, all of them. It seems to work when the computer first starts up.
I honestly have no clue what sparked this issue.
Any Ideas?
And has anyone else had this issue?Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter <b><i>MobileEngine.Security.SSLSupport=false</i></b> but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar -
I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?
You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation -
My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!
Without know exactly what you did or what happened:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Alternate access mappings have not been configured.
Alternate access mappings have not been configured. Users or services are accessing the site
http://spwf01:84 with the URL
http://10.168.3.26:84. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL
http://10.168.3.26:84.
as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
why I am receiving these errors? even alternanet acess maping is configured
adilerror message is saying your AAM settings are not properly configured, May be you are trying to access site using the URL which is not registered in the AAM. usually when we trying to browse the site using IP address or Server name.
check this post more detail:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/aea5a5c7-761b-4c49-89df-d313d52f1ee7/alternate-access-mapping-errors?forum=sharepointgenerallegacy
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Maybe you are looking for
-
ASM on SAN datafile size best practice for performance?
Is their a 'Best Practice' for datafile size for performance? In our current production, we have 25GB datafiles for all of our tablespaces in ASM on 10GR1, but was wondering what the difference would be if I used say 50GB datafiles? Is 25GB a kind of
-
When will apple let us use own on pictures for background?
I am honestly a huge Apple Ipod brand and honestly would not buy anything else. however, the new Ipod nano 6g in my opinion was a little rushed. First of all i love the picture function that the Ipod has but i would like to see one of my own picture
-
Hi Can anybody throw some light on what happens when a BPM Process is completed successfully? Does the process and its data get archived in file system? If so where to look for it and should we consider this for performance of the box? Thanks, KN.
-
hey guys. I am having trouble with my internet. My MacBook Pro seems to be connected with Belkin wireless router, but the internet would not work. We recently changed the router so its pretty new, and it used to work on my HP laptop. Although there w
-
Replacement download PhotoShop Elements 12?
I recently had to wipe my hard drive clean in order to get rid of a virus infestation. Naturally, I lost my copy of Elements 12. I have all the registration information. How do I get a replacement download?