The stupides application ever

This Itunes is a joke. Ok, I got the part where to manually load music or anything else I have to click in thousands of places to stop it syncing what I don't want and delete stuff without asking me.
Now I'm trying to place some episodes of a podcast on the Iphone and it doesn't want to. Of course there's no error message or something to tell me what I'm doing wrong. I have to drag the whole podcast and delete those that I don't want, great!
What school drop-out designed this application?

Ok, so it totally messed up the iphone, the episodes were on the iphone, it didn't displayed them anyware, not in itunes, not in podcasts on iphone. I could play them because they were inside a playlist but could not delete them. Great. Looked some more and found them in the music folder, deleted them from there, but the free space wasn't updated. So, no podcasts on the phone, on itunes, nowhere but no free space either. Wow, well, I was forced to click sync in music and somehow it managed to free the space up and also deleted one ringtone, why not!!!!
Now I, after 2 wasted hours, I can finally place what I want on it, wait, I have to search again for the ringtone because Itunes says it's missing...
Thanks Apple, NOT!

Similar Messages

Help, My iphone can't load any of the downloaded application ever since i updated my phone last night through itunes!! And its telling me that it is error 1004!

HELP!! My iphone 4 can't load any of the downloaded application such as Facebook and games etc ever since i updated my phone last night through itunes and it indicates that it has an error 1004.
Anyone has any idea how to fix this ?

If the error occurred during the update you need to redo the update, as it corrupted something on your phone. Knowledge Base article http://support.apple.com/kb/TS1275 says:
Error 1004 and 1013: This error may be the result of the connection to gs.apple.com being blocked, redirected, or interrupted. Adjust your hosts file or security software to ensure that connections to gs.apple.com are not blocked. If the issue persists, try restoring on another computer with a known-good connection. If this restore is successful, you will need to contact whoever supports your install of the operating system and security software installed on your computer for assistance. If your hosts file redirects requests to gs.apple.com, you may choose to follow Can't connect to the iTunes Store, in the "The 'hosts' file may be blocking the iTunes Store" section.
This usually happens if you have used a hacking program like Tinyumbrella on your computer sometime in the past.

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

Stupid questions about keeping important calls on the FX application thread

I'm working on a project that I've been developing for about the last 6 months. I'm using JavaFX as the graphical side, but I'm taking input from a music processing program called Max/MSP, and I'm getting user input from a camera. Both of these things need to run on separate threads from my FX application thread. Up until now, things have been going smoothly. I can manipulate things on screen from my user input, and I have two way communication working between my JavaFX application and Max. Now, however, I need to start actually drawing stuff at runtime. Up until now, pretty much all FX side manipulations of been to just make translations. I now need to create, add, and remove children from Nodes. So I'm of course getting an error saying "not on FX application thread". I understand why it isn't on this thread, and why this is a problem. So I made some changes, so that calls that will make changes to the nodes on the stage, will only note the data, and then make the changes later, on the FX application thread. And then I run into problems, involving my own stupidity...
I have no idea how to get these calls onto the FX application thread. I mean, this should be really easy. I'm obviously missing something. Or maybe I'm just really tired, and have been looking at this for too long, or maybe the fact that it's been 6 months since I wrote this part of the code. But I see my Mainstage class, which extends Application. It has a start function, which sets up all my on screen do-dads (extended from Nodes and such), calls stage.show()... and then seems to end. When I've done things like call translate functions on my nodes from my user input thread, or from my communication from Max thread, things seemed to have worked. But now I'm thinking I might have been handling that wrong from the ground up. It seems likely that I should be having a "main game loop" (it isn't actually a game, but still, same principle) where I can tell the stage to update all the various nodes with the changes that have happened since the last frame, and try to get everything to update in time for the graphics to render at a reliable frame rate. And yet, I'm just not seeing how to do that. I'm sure this should be obvious, but I'm flat out blanking. And the time crunch is starting to descend... Please, if you can point out some standard way of avoiding this hopefully common newb mistake, I would greatly appreciate it!
-cullam

Checkout the documentation on "Pulse" in the JavaFX Archictecture overview which may help clarify some of your questions.
http://docs.oracle.com/javafx/2.0/architecture/jfxpub-architecture.htm
In simple terms, as I understand it, the framework will check 60 times a second if anything is dirty and needs repainting. If everything is clean, it will do nothing. If something is dirty, it will repaint it (although the repaint is kind of clever and highly optimized to support region image caching, make use of hardware rendering, etc).
So you can see that the main rendering loop is essentially hidden from you. Instead you construct a SceneGraph, the system checks regularly whether or not the SceneGraph has changed, and if it has it renders the updated SceneGraph.
In most JavaFX applications, you have a UI with controls and add event handlers which respond to control input to update the SceneGraph. In such programs, creating a main loop is unnecessary.
You can set up an animation timeline say at, for example, 30fps (half the pulse rate), then, on every other pulse, nothing will have changed so no redraw will happen. This is only necessary if you are performing an animation or capturing camera input, etc yourself (rather than using a Transition for example).
Actually, if I get my state changes working properly in a runLater call, do I need to also write a main loop? No, you don't need to write a main loop. Depending on the exact application, you may want one, but if you are already getting events generated by your camera input at 30fps, processing each 30fps from the camera in a runLater call would work fine without creating a loop.
But you do need to be careful that you don't send too many runLater calls and eventually overload the JavaFX event queue. For example it makes no sense to make more than 60 runLater calls a second to update the scene, because the system will never update the scene more than 60 times a second anyway.
If you do get a working camera app integrated with JavaFX, please post or blog about it as I am sure many people are interested in such an application.

HT1338 hi when ever i go to open up the app i want to use it says please purchase the software application first

hi when ever i go to open up the app i want to use it says please purchase the software application first

Have you purchased the app (what app)

Has anyone had issues with the new Mac Pro computers and the Adobe Application Manager?

We just purchased a new Mac Pro and transferred everything from the old computer to the new one. Now we are getting Adobe Application Manager errors and it wants us to download Application Manager. That leads us to the Adobe Installer that encounters the following issues
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem. But that doesn't work either.
Anyone run into this?

Yep, half of my tracks are coming up displaying an error -69 ( http://docs.info.apple.com/article.html?artnum=302684 ) and every time I remove a track from the shuffle or update the shuffle, Itunes opens a window displaying the contents of J:\ (obviously the ipod) and hidden folder \iPod_Control.... I'm really irked with this. Been mucking around with the stupid thing for hours now.
Nothing was wrong with it until it suddenly decided to stop working, it wouldn't play tracks and Itunes wouldn't recognise it, hadn't missed a beat up till now. Sifted through the Support site for an answer and getting told I needed to update Itunes and update the Ipod software, ***?? It was working fine before. Me thinks Apple have inserted software in ipod to force users to update to newer version of Itunes. Anyway, ever since updating to the latest Itunes, the Ipod is back in action, but it is trying to tell me that half of my mp3s are corrupt (see error -69), rofl, um no, it's your stupid software Apple, I'm off to by myself a decent MP3 player without the bloat software.

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

HT200109 Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?

Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!

I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later.

Error on hosting the web application

Hi all,
I am developing a web application using servlets and jsp's and has been deploying this application in Tomcat web server. But now suddenly i am facing some problems in starting the web application.
When ever i start the Tomcat web server, the home page of tomcat is arriving and then when i go to any link in that home page, i am getting the following error.
End of the Tag in the run method.
java.sql.SQLEception:unable to connect to any hosts due to exception:java.net.NoRouteToHostException:No Route to host:connect
**BEGIN NESTED EXCEPTION
java.net.NOROUTETOHOSTException
Mesage:No Route to host:connect
** END NESTED EXCEPTION**
this is the error i am getting in the console program and i can't instantiate my web application. Can anyone suggest me a solution for this problem.

I don't see applets mentioned in the supported features nor in the unsupported features so not sure if they are supported you would likely need to contact the operations team to confirm.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

My itunes app was working fine then all of a sudden I'm getting an error - The Itunes application could not be opened. The required folder cannot be found. But it doesn't tell me what folder.

I am using Windows Vista. My itunes launched fine until now. Now I get an error - "The Itunes application could not be opened. The required folder cannot be found". I have no idea what file it is looking for. Has anyone seen this error?
I have also tried to uninstall the package and I get the error Could not access network location %APPDATA%\. And it won't uninstall. I don't know why it's complaining in both cases.
Itunes was working 3 weeks ago with no problem.
HELP!!!

hey did u ever get you itunes fixed?

Why does Photoshop display colors differently from the other applications even in sRGB mode ?

Hello all !
Here is my problem :
Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
If I understand correctly this is how all native windows applications work.
This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
Now this is the case until I calibrate my monitor.
When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
Here is my system configuration :
- Photoshop CS4 (11.0.2)
- Windows 7 64 bits
- HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
Thanks in advance,
Yannick

That sounds like an invitation to continue to talk about the issue. Fair enough.
I'm not sure where you're getting "insecurity"... I am just trying to help you help others more effectively.
I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant). Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module). The term "CMS" is used in the computer industry for about a dozen different things.
While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents. A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document. If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management. Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
Not every monitor profile is a "custom monitor profile". Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update. Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote). As I said, it transforms color values. That was the key error in your description that prompted me to comment.
If ever there is a time to pick words carefully, it's in a color-management discussion.
-Noel

Where is the home/application/address book in Lion. Can't find it to move in a backup of my address book.

Where is the home/application support/address book folder in Lion? Can't find it to put in a backup.
I made a mistake. I want to find the home/library/application support/address book - not the application itself. The whole library is not there - is it a hidden file? And if so how do I get it to show?
Bette
Message was edited by: lopezbette

Kappy wrote:
All applications are in the /Applications/ folder, not the /Home/Applications/ folder. In fact the latter should not even exist unless you specifically created it.
Kappy, I was going to start a Thread about the Application Folder so I'm glad you brought it up and you said that it should not even exist. I've had an Applications Folder within my Home Folder thru multiple OS. I'm even tempted to say since OS 9, but I'm not sure about that. There has never been anything in that folder and I don't remember ever creating it. Infact, The folder to me looks like a folder that would be installed as part of the OS.

Blackberry Pearl- Why it's the worst phone ever made

Here's why I think the Blackberry Pearl is the worst phone ever made.
1. I can't get photo's off of it. My G1 takes a few seconds. I've worked with this Pear for hours upon hours cannot get my photo's off of it. The Desktop manager really bites too no help there. I really dislike this phone. The software just as bad. I guess they were on the move when Desktop manager was getting written.
2. The phone on occasions would lock on letters instead of numbers. There wasn't an intuitive way to get it unlocked. I found it more intuitive to get a my return from the IRS than it was to get the phone back to dialing numbers.
I'm having my kids dress up as a Blackberry Pearl for Halloween. I'm going to make a Halloween Movie Freddy Kruger attacks people with Blackberry Pearl the topper scene features unsuspecting Pearl user getting tied up and has them attempt to copy their photos off to a PC and the video gets put on Youtube for Christmas.
Very unsatisfied with your product.
Don Quixote

I want to join the fun here and list all the different reasons why I'm very unsatisfied with this phone.
The actual phone part of this phone is pretty slow. It accepts a phone number almost 3 times slower than I can type it in. Even typing a name on their handy search bar takes forever to get a result. If I type to fast, it just ignores a couple of my numbers so I have to delete and retype, at the same super slow pace. I'm guessing that it searches all sorts of contact and history lists to give me cool suggestions, and that's what makes it so slow. Either way, it irritates me to no end that the basic reason I have this thing is slow as dirt.
All 3rd Party and Blackberry apps require the Blackberry data service. Even though there's WIFI on this phone, you simply can't connect to anything except the Browser (and even the Browser requires some setting changes to bypass the upsell screen). This phone CAN do 3rd party services and other applications without the Blackberry data service, but they just don't allow you to.
Sometimes my phone just turns off. I don't normally mind the 3 minute boot up process, but when I'm in the middle of something and my phone turns off for no reason, it just compounds my frustration.
The keyboard freezes up all the time. After a good 1-5 minute "please wait clock", I finally get a message saying there was an error and my input application had to be reset. Sometimes it doesn't quite reset all the way and I have to pull the battery and again wait for the long boot up process.
Its a little unreliable. Besides the phone turning off at random and the keyboard freezing, I still have problems other problems. My bluetooth turns off and sometimes doesn't come back. Once I had to get a new phone sent to me in order to correct that problem. Pressing buttons doesn't always get a response, especially the green "call" button. If the phone is bogged down, it just ignored commands, which is pretty frustrating especially if you press a button and accidently double enter a command that is both the "on" and "off" options. Also, sometimes the screen fades out (like its suppose to) but doesn't come back when you press keys. Or the external notifications just don't turn on. It somestimes just doesn't read my memory card. The zoom feature on my camera also got stuck.
Other small gripes involve having no caps lock, the SureType never learning from my typing ("Hey" always goes out as "Get"), its overall slowness, the looseness of the back casing, the low quality camera, and so much more.
I don't suggest this phone to anyone.

Accidently changed the folder to open with the srong application

Hi there, i've just connected my mac formatted iPod to a windows pc and have been following the instructions to get my musicoff the iPod on to my pc. But in the process i have accidently changed the folder to open with quick time and i can't remember what it was supposed to be opened with. I know, stupid!!!
Does anyone know what i mean? and if so can they help, please!
Thanks in advance

Sorry. Basically, i have plugged my mac formatted ipod into a windows pc then gone into the driv (where it says contacts, games, recordings etc) in there, there is a folder which is called metadata. I have accidently changed this folder to open with quick time instead of the default. I can't remember what the default application was.
Can anyone check this with their ipod?

Knowing the identity of the calling application.

I have a static object which can be shared between two applications, similar to a static object that can be shared between two applets. Now if the object has a method say myMethod() how can i know which application called the method. To be more clear.
Let my object be MyObject.
Now the static instance for the object would be
static MyObject myObject = new MyObject().
I have two applets appletA and appletB;
Suppose appletA or appletB were to call myObject.myMethod(), how will i know that appletA called the method or appletB called the method.
I need to know this for applications not applets if there is a difference in solution for both.
Any help would be really very useful.
Thanks
Rishab

Actually there is more to the problem. I have a static object reference in myClass. Okay now when ever the application calls myObject.myMethod() i need to update the reference to the calling application. I cannot change the method signature of myMethod() to pass the reference of the calling application, because this will be called by someone else. Also i forgot to write this , myMethod is a static method. So the only way this can be called are in the following ways.
class myApplication {
myApplication() {
myObject.myMethod();
myApplication b = new myApplication();
myApplication c = new myApplication();
Now in myMethod i need to know the following
static void myMethod() {
// Caller myApplication b or myApplication C ????
I am not sure how to use, this but the Security Packages have some way to do this i think.
I have tried the following, using two applets.
System.getRuntime() in myApplet 1 or myApplet 2 returns the same object, so no use.
The class loader used for both the applets is the system class loader so no use.
One question, taking the case of two applets, they are running on the same browser VM. But wouldnt they be running in two different threads. The currentThread for both still is the same.
RMI is out of question, cause i am not supposed to use the RMI package.
Thanks for the help so far.
regards,
Rishab

The stupides application ever

Similar Messages

Maybe you are looking for