The Super Talent memory ram W1600SB8GM is compatible with the model MacBookPro MD103E/A Mid 2012

The Super Talent memory ram W1600SB8GM is compatible with the model MacBookPro MD103E/A Mid 2012

If you can buy from Crucial, Amazon or macsales (OWC), I would (I know that Crucial and OWC ship internationally but I don't know about Amazon). Both have lifetime guarantees for their products and should not be affected at all during shipping.
Amazon has a better price on the Crucial RAM than even Crucial, by the way.
Clinton

Similar Messages

  • Is this Internal Harddrive compatible with my Macbook Pro 13 inch (Mid-2012) model?

    Seagate Momentus 500 GB Laptop Internal Hard Drive (ST500LT012)
    http://www.flipkart.com/seagate-momentus-500-gb-laptop-internal-hard-drive-st500 lt012/p/itmdhyu4weuzqtzq
    I purchased this internal disk. I need to know if this will be compatible. Only then I would know if its Okay to use or should I exchange it. I need you guys to tell me.. Thanks for your help :-)

    An SSD replaces your hard drive. Unfortunately they are kind of small in comparison, so you may need to stick with a hard drive. A SSD uses flash memory like a USB drive, except in place of your hard drive. The speed increase is phenominal. This will replace your drive so you will need to reload OS X which is easy thanks to Internet Recovery.
         Kingston makes a 64GB model that is decent, I have one in an older original MacBook and it feels so much snappier. http://www.newegg.com/Product/Product.aspx?Item=N82E16820139949
         http://www.newegg.com/Product/Product.aspx?Item=N82E16820226318
    They vary in all different capacities and speeds. Not all SSD's are created equal.
    Follow the instructions in your MacBooks manual to upgrade the drive.
    You will need a 2.5 inch SATAIII SSD if you choose to go that way.
    Between the SSD and the RAM upgrade you have a beast of a machine.

  • Super Talent Memory Issue - RS482M4-ILD

    I just purchased an RS482M4-ILD board with 2 - 1 Gigabyte Super Talent DDR400 D32PB1GJ DIMMs. System is stable but the boot messages state that the DRAM clock is at 333mhz. The data sheet for the Super Talent states that the DIMMs runs at 2.6v. I read in couple of places on this forum that only 2.5v DIMMs can be used.
    Am I using the wrong memory? ???
    Which memory can I use for this mobo? (Make and part# will help immensely)  ???
    If I use slots 1 & 3 does the memory default to dual channel?  ???
    System Stats:
    AMD Athlon 64 3800+
    2 - 1 Gigabyte Super Talent D32PB1GJ DIMMs in DIMM slots 1 & 3.
    RS482M4 A7191AMS V1.1 101505 15:40:42
    Maxtor 200GB Primary
    Maxtor 300GB Secondary
    2 IOMagic DVD-Writers
    TIA,
    Mitch

    What processor are you using? All older 130nm cores require 4 sticks to run at DDR 333. You will atleast have to run at a 2T timing with 4 sticks and a 90nm Venice or San Diego core.

  • Is it possible to upgrade the graphics card on a mid 2012 MacBook Pro? And is it possible to upgrade the RAM without voiding the warranty?

    Hi I was wondering if it is possible to upgrade the graphics card on a MacBook Pro and the RAM without voiding the warranty? I have a gt 650m in my MacBook Pro, non retina, and to me, its not enough power for me, so i was looking around, and I found a retailer that would give me a nvidia gtx 660m for a decent price. Also, the ram needs to be at least 12gbs, to ensure that my computer would run fast.
    If you can help, please tell me,
    Thankyou.

    No, the video card cannot be exchanged - you have a pretty decent GPU there; not sure why you'd want to switch it out. You can upgrade the RAM to a maximum of 16GBs. Apple recommends upgrading in matching pairs, so I don't really think I'd try 4GB and 8GB stick.
    Both Crucial and OWC have memory available for the new Macs. Both are reputable dealers and know Macs well and I would only buy from these sources (and I would buy Crucial, were it me).
    Although your Mac didn't come with a users manual outlining the installation of the additional RAM, you can download the late 2011 model users guide as the models themselves are almost identical.
    Good luck - write back with any questions.
    Clinton

  • Need help on rams to be compatible with my Spec

    Hi I need to replaced my rams. Appreciate some advice here. Currently I am using DDR PC3200/400Mhz rams. As it's no longer economical/ value-for-money for me to get PC3200/400Mhz rams, below are the alternatives I am looking into since their prices are more cost effective than 400Mhz rams. According to my Spec, Intel 2.8Ghz Pentium 4, MSI motherboard 865PE Neo 2 PLS, 478 socket. Will I be able to use PC4200 533Mhz, PC5300 667 DDR2 rams?
    Kingston DDR2 533Mhz 1GB
    Kingston/Corsair DDR2 533 Mhz PC4200 1GB
    Patriot DDR2 PC4200 533Mhz 1GB
    kingston DDR2 PC5300/667Mhz 1GB
    Compatibility and stability is more impt to me. I do not intend to overclocking. Appreciate anyone if you could help advice me on the timing as well for these suggested Rams w/o overclocking.
    Thanks a lot.
    Intel Pentium Prescott 4 CPU 2.8Mhz
    MSI 865PE Neo2 PLS
    1.5GB Ram (2x512MB, 2 X 256MB), 3-3-3-8 clocks at 2.6V
    1 80GB SATA 7200rpm HDD
    1 LG DVD writer
    1 floopy disk
    1 ATI graphic card 9550SE
    PSU +5.5V 24A, +3.3V 15A, 12V1 12A, 12V2 15A

    Quote from: Exo on 21-May-07, 18:23:34
    You can't use DDR2 ram with that board. You need DDR1 PC3200 ram. Best thing to do is sell the ram you currently have and get a new dual channel kit as your slots are already full and further mixing will lead to problems.
    Hi thanks for replying.
    I don't intend to mix the existing rams that I have with a new replace rams. I will just install 2 x 1GB rams. So I need to know if my motherboard will be able to use 1 GB DDR2 533mhz or DDR2 667Mhz rams before I go and buy.
    Really can't use DDR2 rams?

  • TS3474 I purchaed the earpods with mic & controls and they don't work with 6th generation nano.  Are the features supposed to be compatible with this model of nano?

    I purchased the earpods with mic & controls and the features don't work with 6th generation nano--is this normal?

    Hi there,
    According to the product page:
    The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models.
    Your iPod Nano may be one of the models that does not support the volume up/down function. Take a look at the page below for more information.
    Apple EarPods with Remote and Mic
    http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
    -Griff

  • Is PB compatible with older models of BB smartphone

    I`m have bought and waiting for delivery of my new PB. I was going to upgrade my phone,but now that i`ve bought a PB, felt that I wouldn`t have to now. So, is the PB compatible with all of the older BB smartphones, or are there features that will be lost if you don`t have a newer smartphone
    Thanks
    Aspire to inspire before you expire!
    Solved!
    Go to Solution.

    To agree with what Peter stated, to use the Bridge app, you must have OS5 or greater on the handheld BlackBerry.
    I don't recall that the 8100 model ever got OS5... i don't think so.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I need to know the reason Why Macbook Pro Mid 2012 have yellow tint screen?

    I am confusing about the reason Why Macbook Pro screen have yellow tint color?
    There are few reason that I got from some apple shop saleman(In Thai) and someone in discussion experience.
    First (1), The reason is IPS or PSL Technology made the screen to be yellow tint color.
    Second (2), Someone told me, It is depend on production lot some lot don't have yellow tint screen but, some lot have yellow tint screen.
    Third (3), Someone told me, It is normally case of Macbook Pro Mid 2012. Yellow tint screen will be recovering when using it long time.
    (In the third, I'm not believe. Because, My iPhone 4s got a Yellow tint screen too. And, I used it for 7 months. The screen was the same at 7 month ago)
    I need to know that what is true and what is false.
    I just confuse Plz answer to me.
    And, ...
    Now, I am deciding to buy Macbook Pro Mid 2012 13 ".  I need to know the surely reason. Why Macbook Pro have a Yellow tint Screen?
    If it is not normal case when I found a Yellow Tint Screen. I will reject that machine.
    so that, I used the knowledgeto select the best Macbook Pro for me.
    Plz answer to me, Plz Help me ^^
    Thank you

    Hi, carl wolf
    Thank you for your answer.
    You mean the below reason is hoax or incorrect or fake right?
    First (1), The reason is IPS or PSL Technology made the screen to be yellow tint color.
    Second (2), Someone told me, It is depend on production lot some lot don't have yellow tint screen but, some lot have yellow tint screen.
    Third (3), Someone told me, It is normally case of Macbook Pro Mid 2012. Yellow tint screen will be recovering when using it long time.
    Sorry for more question. I fear saleman lie me when I go to buy.
    Thank you very much. ^^

  • Cd rom not working. When I insert a disk the computer ejects it. Mid 2012 macbook pro.

    When I insert a disk the computer ejects it. I have reset the smc and re installed mountain lion. Mid 2012 macbook pro

    Try another disc of different brand.
    Try to clean the optical drive lens with a lens cleaner disc.
    Contact Apple Support. Click the link at the bottom of the page.
    http://support.apple.com/kb/HT2801
    Best.

  • What is the details specification of the internal Mic of MBP mid-2012?

    I've been wondering, what is the specs of the internal mic? It sure is great for normal chat or facetiming, but it doesn't sound very good for studio-recording tier.

    The built-in mic is a very tiny mic. About 1/4" overall and the actual capsule is even smaller.  In the MBP models that I am familiar with, it's located under the left speaker grille.  As a single mic, it can only generate a mono signal but the final data stream is stereo with identical L & R channels.  Given its size and location under the grille it's an amazing performer but you cannot expect it to match a studio mic.
    In AudioMidi Setup you can adjust the built-in mic's sample rate, bit rate and gain to some extent.   However, I have never found this particularly useful.
    If you are doing studio recordings (or anything where you require fidelity and/or true stereo), you need to get yourself a couple of good external microphones.   MacBook Pros used to have a multipurpose stereo analog audio input (up to the mid-2012 models) but newer models do not.  Depending on the model you have, you may be able to use the analog audio input or you may have to get a USB mic, adapter or mixer.

  • Looking for 16GB RAM That is Compatible with Late-2011 17" Macbook Pro

    Hi guys,
    I am looking to upgrade the RAM and Hard Drive in my late-2011 17" Macbook Pro. I've already found the hard drive I want to use, but I don't know as much about RAM, and I'm not sure which 16GB (2 x 8GB) kit would be both compatible and give me the best bang for my buck. I am in Canada so any suggestions linking to Canada Computers or NewEgg would be the best! I'd really appreciate any help.
    Thanks,
    Jacob

    First, goto OWC - https://www.macsales.com/
    It has a guide for all things Mac & Memory
    Second, get an SSD as it will speed up your computer tremendously.
    OWC or Crucial are very good Mac-friendly brands.

  • 16gb of ram compatible with late model 2.4ghz 15" mbp?

    read online that people are putting 16gb of ram in thier mbp. any issue known to anyone by doing that? anything info would help, thanks.

    Hi ellachi,
    I've had 16GB a little shy of two years.  I have a late 2011 MBP 15 inch.  You won't actually use the memory unless you have a memory intensive application like VMware fusion.
    I do use virtualization for developer work, and it makes a huge difference to have 16 Gb.  I also use a windows VM to run MsOffice on a Windows 7 guest on my MBP.   When I'm not doing that; under normal use (I just checked right now), I use 5.17 GB of memory.
    Buy very good RAM.  Don't buy the cheapest as intermittent memory problems are very difficult to diagnose.  Hope this helped and good luck.
    BB

  • Accidentally the other thread: Macbook pro mid 2012 13" no retina - kernel_task 300 % of memory and fans going

    Made a new thread since the old got accidentally marked as solved
    hello. I bought my macbook when I was in usa the 28 december 2012... I am now back in sweden and today when i was sitting in the couch the fan started go fast and cpu go up to 300%....
    I have googled and found hundreds of topics like this...
    Basically
    Fans going quick and loud
    Cpu 300+% all the time from process kernel_task
    Tried to
    Reinstall OS, nothing
    What should I do? I can provide more info if neccesary. Thanks.
    BTW, this was a big investment... I cannot loose this macbook. 1199$ is to much for me.

    iStat
    Activity Monitor
    Enough? No other process is doing anything special

  • Can I replace the hard drive on a mid 2012 MacBook Pro?

    I just bought a new MacBook Pro. I had a 2010 MBP and kept the hard drive (Hitachi 500gb 7200 rpm) from that computer. It ws running 10.7 and worked fine. It still boots up perfectly on my MacPro so I know it works.
    I tried to boot the new MacBook Pro using the old drive but I get a circle with a line through it. I have tried to boot using Firewire and even installed it into the new MacBook Pro. I then tried to re-install OS 10.7. I just downloaded it from the App Store for my MacPro so I tried to use it to re-install. It will not work on this new Macbook Pro. I had to download a version specific to this computer (using the "recover" disk). I takes 1.5 hours to download and then it still didn't work. When the computer reboots after the download and restarts I get the same **** circle with a line through it. The new "manual" is a joke. There is no reference to upgrading drives or memory. Did Apple decide to make their new laptops inaccessible to the owner? I can't find any info online and at the Apple store today they told me they knew of no reason that the drive wouldn't work.
    Anyone else have any thoughts?

    Have you considered Migration Assistant?
    http://support.apple.com/kb/HT4889
    From Mac HELP:
    Transferring information using Migration Assistant
    You can use Migration Assistant to transfer important information, such as user accounts, applications, network and computer settings, and files, from one Mac computer to another. You can also transfer information to a Mac from an external disk. Your information can be transferred using a FireWire cable or over a wired or wireless network.
    NOTE:If you’re transferring information over a wired or wireless network, make sure your computers are connected to the same network.
    To transfer information from a Mac:
    Open Migration Assistant (located in the Utilities folder in the Applications folder), and then follow the onscreen instructions.
    When you’re asked how you want to transfer your information, select the “From another Mac” button, and then select the method by which you want to transfer.
    To transfer files using a FireWire cable connected to your computers, click Use FireWire. Then, follow the onscreen instructions to restart your other Mac while holding down the T key.
    To transfer files using a network, click Use Network. Then, follow the onscreen instructions to open Migration Assistant on your other computer. When you’re asked how you want to transfer your information, select the “To another Mac” button.
    To transfer information to a Mac:
    Open Migration Assistant (located in the Utilities folder in the Applications folder), and then follow the onscreen instructions.
    When you’re asked how you want to transfer your information, select the “To another Mac” button.
    On the other computer, open Migration Assistant, and then follow the onscreen instructions. When you’re asked how you want to transfer your information, select the “From another Mac” button.
    Ciao.

  • Updated not compatible with Itouch model

    Just downloaded an updated to AOL radio app however did not see it required a newer gen model of itouch ( I have first gen) is there a way to restore to previous version of AOL Radio app?

    No way that I know of if you actually installed it on your iPod unless you have a backup of the old app in your computer's backup. Restoring from backup will not help since the backup on contains application data, not the application itself.

Maybe you are looking for

  • Using Sun 7110 in a Microsoft AD network

    I have a SUN 7110, I would like to use it as a file server in my Microsoft AD network. I have an old file server running on Windows 2003 server. I would like to move all files over to the 7110. If I choose to use CIFS is there a way for the 7110 to t

  • The function button in HP G62 series

    i have HP G62 a20SE notebook, with win 7 64 bit installed i had to format my notebook after installing the drivers, i noted that the function button (fn) is not completely working for example to rename a file or folder i usu. press fn+f2 but now it's

  • Gspls_

    Hi, Could you help me? I am trying to see about xml server forte example but I have one problem. After I call forte method by SOAP I have this message as result by iPlanet UDS SOTestAccountProxy.fillWidget received SOAP Fault; code=SOAP-ENV:Client st

  • ORA-600(DBIF_RSQL_SQL_ERROR)

    Dear Experts, In our Development  system from the past couple of days we are getting too many ABAP dumps like RAISE_EXCEPTION( Exception condition "ADD_PARTITION_FAILED" raised.) DBIF_RSQL_SQL_ERROR DBIF_RSQL_SQL_ERROR DBIF_RSQL_SQL_ERROR(Database er

  • Kerberos pre-authentication failed

    Hi, I have a customer has the below issue: After he changed their administrator account password on domain, event ID 4771 is continuously thrown in the security log in DCs. Below is a snapshot: Also the below email alert from ADManager: Alert     Mes