The supposed fix for tabs on the bottom is NOT ******* WORKING and if you hadn't noticed , ITS ******* ME OFF, i have done everything here and am not a noob
I have been through everything suggested on this site to get my tabs back at the bottom, nothing is working, in config it is set to false and already was, this just changed this morning and i can not fix this or get the reload button back, i want this fixed or i'm going to chrome which will really *** me off as it sucks. Long term FF user ...
Edit. Please don't swear. It will not increase your chances of an answer. ~J99
In my opinion, the folks who are running the show and call the shot over at Mozilla, DO NOT care about their customers. I've not ever seen a way to contact a live person when i've had a technical problem.
I have always been helped by strangers who have no affiliation with Mozilla but who use their products.
Good Customer Service for Mozilla seems to be a dirty word.
Similar Messages
-
My Nano 6th gen has disappeared from my devices in itunes and also from programmes on my computer. I have tried all the troubleshooting and it has not fixed it?
There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery. -
Recently I have not been able to open iTunes,I tried removing and reinstalling it but still won't open. I now get the message The file "iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Any suggestions on how to get iTunes to work again ?
Thanks
<Edited by Host>Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
since I changed my notebook from Macbook Pro 2 Sony Yario the problem was born
http://support.apple.com/kb/TS2830
-
What's the best fix for a slow computer?
What's the best fix for a slow computer?
What model computer? What are your primary uses and apps?
First thing anyone can do is replace or upgrade the system boot drive to SSD. Makes a very nice improvement.
How new or old is it? What version of OS X is it running?
Maybe it won't run faster but could run better with more RAM.
Take a look at all the tabs in Activity Monitor. If not on the Dock, go into Applications/Utilities and open it and keep it on the dock. Can tell you what is using your processor the most, RAM usage, disk and network I/O.
Don't install things that aren't needed. That can be counter intuitive to some but 'less is more' and some just really pull a computer system down. Security programs, "clean up programs" and others.
General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form -
I have a 3rd Generation ipod touch that is not recognized by itunes or my computer. My itunes works with other apple devices I own. I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off. I can't reset it. Have tried to use the suggestions on the apple site to no avail. Any suggestions ?
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work. Any help would make my day...
I got some more info that may help.
I put a cd on my laptop, and was able to share it to my computer... So the problem is only from my computer to my laptop. I tried the firewall thing and it did not help. I read the rest of the trouble shooting page, and nothing else applies. iTunes is an execption and already was. I can not think of anything else being my problem. Do you think I should re-install iTunes or would that be a waste of time? At this point I am about to just call Apple for some help because I am getting to stressed over this.
Thanks -
After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.
The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update? -
I previously had an iPhone 4 synced and paired with my 2012 Hyundai Santa Fe and had no issues. Now I have a new iPhone 5 and am able to sync the phone but the contacts will not update in the phone book listing for the vehicle. I've tried several times to re-sync and pair the phone to the vehicle and still the same issue. I'm able to make an receive calls but no contact information is being displayed. From all of the previous community issues reported it's not an AT&T issue, Hyundai issue, it's clearly pointing at the device (iPhone 5) being the issue.
Will there be a fix for this in the next update?
Thank you.Thanks for your response. However, after speaking with a level 2 Apple Advisor and Hyundai there is an issue that both companies are aware of and are working towards a resolution. Here's a blurb from Hyundai that was sent to me after I spoke with Apple Advisor:
"We apologize for any inconvenience associated with the technical issues with devices connected via Bluetooth. Hyundai is aware of the iPhone losing its Bluetooth connection to the vehicle along with any function associated with it at the time. Hyundai has been able to reproduce the concern in our test vehicles and have sent all necessary information to Apple engineers. Hyundai received confirmation from Apple that they will work on debugging.
If your iPhone is 3G, 4, 4S, 5 and has one of the following iOS: 6.0, 6.1.0, 6.1.1, 6.1.2, 6.1.3, 6.1.4 or higher, you may be affected." - Hyundai Engineering -
The home button on my iPad has became faulty, it works sometimes although you have to press it really hard. Can Apple fix this for me?
They might be able to. If it's an iPad 2 then it is still within the warranty period, so as long as it's due to accidental damage it might be fixed/replaced free of charge. Have you tried contacting Apple ? I don't know what country you are in, and whether you are near an Apple store, but you could try looking on this page for your service options.
Before you do that you could try a reset and see if it that helps : press and hold both the sleep and home buttons (assuming that it works) for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Plz provide the permanent fix for this issue
Hi Gurus,
We are getting Issue in smq2 of target system ecc.
"Object was locked by user jobschedular" so when we Resetting the Queue from smq2 entries are moving from that Queue but this is happening very frequently can any body tell me the permanenent fix for this ,how to fix this .As a pi consultant how can we fix this from our side or we need to contact Basis people for this.
As we are in Prduction support .
Reply plz.
Regards
MadhuHi Vila-Thanks for your reply im getting the issue is here is Object is Locked by the user in
smq2 of ecc system when we are resetting the queue the entries are getting clearing from the
queue so instead of doing manually is there q way to do automated process for this thats what i want
the issue is not in PI side.
I just want to bring some points to ur notice is
Message is successfully reached to target system in Target system the entries got stuck in smq2 with the queue name XBTR(Target people side people sayijng that queue name starts with X It belongs ot pi ) so the target people simply assigning that there is a problem on pi side but there is no problem on PI SIDE .
we are unable to find the issue on target side.
Quick reply plz
Regards
Madhu -
Revision: 2384
Author: [email protected]
Date: 2008-07-08 06:23:19 -0700 (Tue, 08 Jul 2008)
Log Message:
The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Erik
Bugs:
SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
Other Bugs Referenced:
ASC-3414 - with block uses local variable instead of object property when -warnings flag on
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3414
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/ASC-3414
Modified Paths:
flex/sdk/branches/3.1.0/lib/asc.jar
flex/sdk/branches/3.1.0/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.javaYes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Revision: 2383
Author: [email protected]
Date: 2008-07-08 06:22:40 -0700 (Tue, 08 Jul 2008)
Log Message:
The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Erik
Bugs:
SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
Other Bugs Referenced:
ASC-3414 - with block uses local variable instead of object property when -warnings flag on
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3414
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/ASC-3414
Modified Paths:
flex/sdk/branches/3.0.3/lib/asc.jar
flex/sdk/branches/3.0.3/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.javaYes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Revision: 2377
Author: [email protected]
Date: 2008-07-07 14:38:01 -0700 (Mon, 07 Jul 2008)
Log Message:
The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Erik
Bugs:
SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
Other Bugs Referenced:
ASC-3414 - with block uses local variable instead of object property when -warnings flag on
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3414
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/ASC-3414
Modified Paths:
flex/sdk/branches/3.0.x/lib/asc.jar
flex/sdk/branches/3.0.x/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.javaYes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Revision: 10677
Author: [email protected]
Date: 2009-09-29 08:09:49 -0700 (Tue, 29 Sep 2009)
Log Message:
Fix for "In ASDoc, the word 'global' disappears from @see link text"
QE notes: None.
Doc notes: None
Bugs: SDK-23429
Tests run: asdoc testsuite
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23429
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja vaTHank you , Nancy. Appreciate the input.
So instead of this:
<a class="brand" href="index.html"><img src="../img/logo-ca.png"alt="Consumers Advocate Review"> </a>
Would it be something like this?:
<a class="brand" href="index.html"><img src="http://ConsumersAdvocate/img/logo-ca.png"alt="Consumers Advocate Review"> </a>
And if I do that, is there a way to cope with that locally so that DW can still display the images?
jeff
Maybe you are looking for
-
Can't backup macbook pro to time capsule
I have backed up IMAC to my time capsule no problems but when trying to back up my macbook pro it wont do it. The macbook pro sees the time capsule but once time machine commences you get error mesage advising problem encountered as macbook pro and t
-
Need procedure to change ip address on private interconnect in 11.2.0.3
Could someone please send me the procedure to change the ip address of the private interconnect in 11gr2 rac (11.2.0.3) The interconnect has been configured using the default HAIP resource during installation of a 2 node cluster on the aix 6.1 platfo
-
Hi , I created a view cluster which contains a hierachy of 3 tables . In trasaction sm34 when I give the entries for 1st table and choose the 2nd table, the entries that i have given already in 1st table is not coming automatically for the 2nd table
-
How to use packages and jar files for applet?
Hi! My applet takes a class say a.class. Now this class depends on other classes that are packaged in a directory and put separately. I want to put this applet on the web. So how do I manage the .class files in he package. I have tried using jar file
-
I'm running form that calls a report which inturn, creates a report on my c drive in pdf format. Is it possible to then run this file in the form?