The sweet success of Parallels....

As I have been a Windows user for many, many years....but being interested in Macs...I finally took the plunge and purchased a G5 Imac Intel Core Duo.I installed Parallels and loaded Windows XP Home in a very short time and now I have a sleek looking computer that now gives me the best of both worlds.Has anyone had any problems with Parallels that they would like to share here.....the two o/s`s run harmoniously together.....
Long Live the Mac........
Imac G5   Mac OS X (10.4.8)   Windows XP Home

Congrats on getting everything up and running.
It's nice to see good news posted here every now and again
I just have one clarification for you. You wrote:
G5 Imac Intel Core Duo
There's no such computer. The G5 and the Intel iMac are two different machines.
G5 is a PowerPC processor. So if you're running Parallels with Windows, then you definitely have an Intel Core Duo processor.
You might want to update your profile, because this machine of yours isn't a G5.

Similar Messages

  • I would like to play an audio cd on my macbook pro. on either the mac or MS parallel window as I have that installed but can't

    I would like to play an audio cd on my macbook pro. on either the mac or MS parallel window as I have that installed but can't

    iTunes is part of OS X, which implies that iTunes was deleted, or that your OS X installation is corrupt.  In either case, the easiest approach usually involves downloading the combo update for OS X — the so-called combo update, and not the delta update — and installing that.
    Applying or re-applying the OS X combo update won't alter your user files, but will reload all recent OS X changes, and should also cause iTunes to be re-loaded.
    If you are running Mavericks 10.9, then download and install the OS X Mavericks 10.9.5 combo update. 
    You'll want to have a backup of your system — updates don't fail often, but they can fail.  If you don't have Time Machine or some other form of backups running, get that going first; before further changes here.

  • I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC.  The valid CS4 serial number for the PC is not recognized by Adobe, even though I downloaded all the software successfully.  They gave me a free 30 day trial.........Does

    I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC.  The valid CS4 serial number for the PC is now not recognized by Adobe, even though I downloaded all the software successfully on the new iMac..  They gave me a free 30 day trial on the new iMAC.........Does this mean I have to spend a lot of money to update and activate the latest CS release on the new machine ??????

    Purple Lobster your Creative Suite 4 serial number is for Windows or Mac only.  If you were previously using it on Windows then it is likely you have a Windows license.  You can verify by checking your serial number at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    If you wish to run Adobe Creative software on your new iMac then I would recommend a Creative Cloud complete or single application membership.  You can find more details at https://creative.adobe.com/plans.  There is also a 30 day trial available for the Creative Cloud if you wish to evaluate the newest versions of the Adobe Creative applications.

  • Need to send Automatic mails when the report successful or Fail.

    Hello Experts,
    Created one report for reconciliation to check BW and R/3 figures.
    There are exceptions designed using reporting Agent settings on the same report.
    (When the values from R/3 to BW are matching it shows Green color and if the values are not matching report shows red color in the columns.)
    There are some mandatory variables for Company code, Period and Currency Type.
    Selections for  Company code and Period are fixed but We have three currency types (00,10,30)
    Reports needs to be executed for three currency types.
    Requirement is that
    when the report is executed for One currency type  (Ex u2013 00)
    If the key figure column shows Green color , Immediately mail has to be sent to necessary mail IDs saying the status successful.
    If the key figure column shows Red color , Immediately mail has to be sent to necessary mail IDs saying the status Failed.
    Like this the same report has to be executed for other two currency types and send the the same status as above phenomenon.
    Sending mails can be taken care by BASIS people with SMTP configuration.
    I want to know the development needs to be done from BW side.
    Are there are any settings in BW to send the message as Successful  when the report shows green color and message as failed when red color appears in the report.
    Regards,
    Siva.

    Hi,
    As i understand you need to set up an alert framework.
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80?quicklink=index&overridelayout=true
    This can also be achieved using BEx broadcaster
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/efdbd593-0e01-0010-4eb1-a09ffedd550a?quicklink=index&overridelayout=true
    Hope this helps.
    -Vikram

  • How do you reassign a device to Mac OS once it has been assigned to the Windows OS using Parallels?

    How do you reassign a device to Mac OS once it has been assigned to the Windows OS using Parallels?  I've tried ejecting device and plugging in again.  I've tried restarting Mac and shutting down Mac completely, but never get the device window to pop up to select the Mac for the device.

    See:
    http://download.parallels.com/desktop/v5/docs/en/Parallels_Desktop_Users_Guide/2 6819.htm
    That is one topic from the guide, not the whole guide

  • How can I display SQL%ROWCOUNT in the "Process Success Message"

    Hi all;
    I am trying to display SQL%ROWCOUNT in the "Process Success Message" of a custom update Process.
    Any ideas?

    Chris,
    I assume,
    ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID );
    is a package / procedure you call to do something. Change the procedure and add an
    out parameter to it, which will get the
    SQL%ROWCOUNT
    value. Then, call this package like this:
    DECLARE
      in_DEPARTMENT_UID NUMBER;
    BEGIN
      in_DEPARTMENT_UID := :P4_DEPARTMENT_UID;
      ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID,  :P4_ROW_COUNT );
    END;Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Which table will give the completion timestamp of the last success run?

    Which table will give the completion date timestamp of the last successful execution of an OWB Mapping or Process_flow.?
    I was thinking of using
    select max(RTA_LOAD_DATE|| RTA_LOAD_TIME) from OWBSYS.OWB$WB_RT_AUDIT
    where
    trim(RTA_LOB_NAME) like '%EMP_LOAD1%'
    and
    rta_status = '1'
    But the RTA_LOAD_DATE AND RTA_LOAD_TIME is null
    and RTA_STATUS column is having the value 1 irrespective of whether the JOB has completed or abended
    Please advise??

    Check with these tables :
    <b>coss
    cosl
    cosp</b>
    aufk
    qmat

  • CNN PipeLine for the Mac! -- sorta: Parallels

    Awesome!!!! I have wanted to run CNN PipeLine on a Mac since it first came out. The Mac version is amazingly weak when compared against the Windows version, since the thing is written mainly for the Windows world.
    Now I can... This MacBook is certainly the most versatile notebook computer on the market. Maybe my enthusiasm rules over reason, but with Parallels powering my Windows XP, now I can! Full graphics, even the limited graphics that Parallels offers offers no penalty at all. This thing works marevelous.
    In the "background" on the Mac side, I have PhotoShop Elements running, along with some stuff I'm needing to do in Excel. Oh yes, Entourage is humming for my e-mail.
    What can I say? Simply as amazing computer. I think I'm biased totally now.

    I used to run Parallels in full screen mode, but now, have backed it to XP to 1152 * 720, so if fits perfectly in a smaller window on my Mac desktop. Like an application in its own window, kinda like PhotoShop.
    Anyway, I agree. I have 2 gigs of ram, so I can easily keep Windows happy (is that possible???) and the Mac smoothly humming.
    Basically, Windows XP is a mere appliation for me.
    But, honestly, I figured that with all the graphics which Pipeline uses, Parallels would choke. But, it really works wonderfully.
    I am so pleased with this computer...

  • Re-show the FPGA Successful Compile Report dialog box

    Hi, everyone,
    Could anyone tell me how to re-show the FPGA Successful Compile Report dialog box?
    I clicked the check box "do not show this massage in the future" on the dialog
    It won't show up anymore
    I need to know the accurate onboard clock rates on my FPGA.
    so the "Target specific properties" can not satisfied me...
    Is there anyone know how to solve this question? ~~Thank you

    To reenable the compile report you must modify LabVIEW's INI file. Make sure the line nirviShowCompileReport=TRUE exists in the ini file. Let us know how that works out!
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • Problems with the combination Mountain Lion, Parallels 8 and VPN

    Hi there,
    Have performed an straightforward upgrade of the OS X to Mountain Lion and Parallels I have have a problem keeping the vpn connection for more than an hour.
    In order to get a the connection reetablished I need to restart the windows session in Parallels.
    Is there any one else facing the same problem?
    Best Regards,
    Wolves0097

    The VPN log looks like:
    1      13:34:36.904  09/11/12  Sev=Warning/3
    CM/0xA3100027
    Adapter address 10.211.55.6 has changed or not detected.  Current address(es): 10.98.70.169.
    2      13:34:52.044  09/11/12  Sev=Warning/2
    CVPND/0xA340000E
    Failed to get adapter index.
    3      13:35:07.044  09/11/12  Sev=Warning/2
    CVPND/0xA340000E
    Failed to get adapter index.
    4      13:35:07.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    5      13:35:08.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    6      13:35:09.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    7      13:35:10.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
    8      13:35:11.861  09/11/12  Sev=Warning/2
    IKE/0xA3000067
    Received an IPC message during invalid state (IKE_MAIN:512)
    9      13:35:12.407  09/11/12  Sev=Warning/2
    IKE/0xA3000067
    Received an IPC message during invalid state (IKE_MAIN:512)

  • HT204291 I have downloaded latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

    I have downloaded the latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

    Can we assume you are bringing up the "Control Center" and the Airplay icon is not there?
    http://www.apple.com/ios/whats-new/
    Do you have the "AirDrop" icon?

  • Hi - I need to download an iPad update and when I do the file successfully downloads and then proceeds to "progressing" then times out - I think it is my firewall but I have turned off all firewalls

    Hi - I need to download an iPad update and when I do the file successfully downloads and then proceeds to "progressing" then times out - I think it is my firewall but I have turned off all firewalls

    If it scare y ou then take the machien back and ask the Apple Store to do this for you. What has probably filled your computer is large libraries such as music,  photos and movies. Apple explains how to move those libraries to an external HD. Please read:
    http://www.macworld.com/article/1153165/move.html
    http://support.apple.com/kb/PH2506
    http://support.apple.com/kb/ht1449
    http://support.apple.com/kb/PH2506

  • Quality collector job fails inspite of extractor fetching the data successfully

    Hi,
    Quality collector job fails on 'DVS' (managed system) inspite of extractor fetching the data successfully.
    Currently Solution manager in use is Solution Manager 'SOP' 7.1 SP12
    All the RTCCTOOL recommendations are applied on SOP & DVS. ST-PI is on 2008_1_700 SP11 on both the systems. ST-BCO component in on SP11.
    As a part of trouble shooting, the extractor run for ATC & ATC exemptions are monitored.
    The extractor run is successfull. Also Master run for ATC is successfully completed.
    ATC monitoring for Custom Code (result) extractor result
    There are no ATC monitoring for Custom Code (exemption) but the extractor run is successful
    Successfull ATC master run on DVS Managed system
    following notes are implemented
    2127901 - CCLM: Quality fails to get Results and exemptions due to Incorrect format of date
    2067543 - Quality Collector : Missing Function name for Remote Solution
    Is anyone facing a similar issue?
    Can

    HI Sylke,
    Note 2098187 is for ATC exception, the not is currently not in the Solution manager system SOP (and also in SOD which is the development system of solution manager landscape).
    But I have configured SOD (Solution manager Development system) to PDS (ECC sandbox) and the Quality collector job was successful (without note 2098187 implemented)
    As SOD and SOP are at same SP level, I am expecting Quality collector job on SOP for DVS to finish successful as well similar to Quality collector on SOD for PDS which is already finished successfully and fetched the data. Can you please advise here?
    Based on 2077995, i have executed the report for DVS in SOP system and the status is Green for '0SM_ATC'
    When i check the for data in 0SM_ATC, I find the data for DVS system
    I am able to successfully run 0SM_ATC_CCL_QUAL but not 0SM_ATC_RUNDATE_LOOKUP.
    when i try to execute the query 0SM_ATC_RUNDATE_LOOKUP in RSRT for SOP, i get the below notification, looks like i need to install/activate  the query in RSA1 transaction
    0SM_ATC_RUNDATE_LOOKUP in RSA1 of SOP system
    0SM_ATC_RUNDATE_LOOKUP in RSA1 of SOD system (development solution manager where Quality collector job for PDS is successful)
    sample output of 0SM_ATC_CCL_QUAL,
    Can you advise here a well? Looks like install/activate 0SM_ATC_RUNDATE_LOOKUP in SOP, should solve the problem
    All the notes suggested are already implemented in SOD and SOP
    thanks
    Sai

  • What do i do if i have lost the Activation Key for parallels desktop?

    Hi!
    I bought a mac book pro on the 15th of august 2006 from the apple store in london.i also purchased parallels desktop at the time.however,i have misplaced the sleeve of the CD,so i dont have the activation key.what do i do?
    please help!
    thanks!
    Mac book Pro   Mac OS X (10.4.7)   parallels desktop

    Welcome to Apple Discussions, karishma!
    You need to talk to the people who make Parallels. You can find them here:
    http://www.parallels.com/en/support/

  • How to know the optimal Degree of Parallelism for my database?

    I have an important application on my databae (Oracle 10,2,0) and the box has 4 CPU. All the tables are not partitioned. Should I set the parallel degree by myself?
    How to know the optimal Degree of Parallelism for my database?

    As far as I am concerned there is no optimal degree of parallism at the database level. The optimal value varies by query based on the plan in use. It may change over time.
    It is not that difficult to overuse the PQO and end up harming overall database performance. PQO is a brute force methology and should be applied carefully. Otherwise you end up with inconsisten results.
    You can let Oracle manage it, or you can manage it on the statement level via hints. I do not like specifying degrees of parallelism at the object level. As I said, no two queries are exactly alike and what is right for one query against a table may not be right for another query against the table.
    If in doubt set up the system to let Oracle manage it. if what you are really asking is how many PQO sessions to allocate then look at your Statspack or AWR reports and judge your system load. Monitor v$px_session and v$pq_slave to see how much activity these views show.
    IMHO -- Mark D Powell --

Maybe you are looking for