The Synch Manager component on the server is most likely unavailable.
HI,
I have user , I am able to login my own user id PSANTU in server data base, after that I had create Mobile Client/Replication Server with my user name : PSANTU , the I had go to Server management and -> Jobs and put comment /job Database Extract, then I had go job parameter set the parameter , Client Database encryption method:-None ,
Client Name:-PSANTU( my Id), Encrypt client Db password: False
Then I had submit the jobs , after 5 mint I got Status is success .
Then I had go ODBC connection here set DSN confiner, set , I got successfully , connection establish , then I had go SIEBEL tools I had try to login Local database , I am getting error here this my
Error : Cannot open connection to SPSIEBTRANING4 (this my server ). The Synch Manager component on the server is most likely unavailable.
Plz help me how I can create local database in my local machine
Thanx
Edited by: razagold on Aug 2, 2010 10:52 PM
Hi,
Have u extracted Local lDB on SADMIN . If not then there is no local DB to get connected so error is valid.
Extract Local DB at server client as SADMIN then populate Local DB
else
Check the parameters for sync manager.set max tasks = 100 & restart the component.
Check ODBC connection as well.
Regards,
Joseph
Similar Messages
-
Cannot open connection to dvsrv1: The Synch Manager component on the server
Hi Experts,
I extracted batabase for the mobile client successfully, but when trying to initialize the lcal database, Getting the following error:
Unable to Connect to server>
<Cannot open connection to dbsrvr1. The Synch Manager component on the server is most likely unavailable.>
<Internal: connect() failed: Connection timed out.>
I do not have port number mentioned over here as this installation is in my personal laptop.
As I understnd all the ODBC connections are working fine. It would be great if get here some suggestion to do some extra check if required.
In my system DSN in ODBC I could see number of DSN have been present, one for local DBF, one for sample, one for server which I belive I created during the DBserver configuration as external. and could fine one more DSN not sure what for it is.
If the ODBC would not have been configured properly then I belive I should not be get connected to application through thin and thick client.
Any suggestion on this would be helpful
Thanks
DeepakHI Deepak,
I have seen a similar problem back here there are two locations in your tools.cfrg where you may will need to make changes.
1.
[InfraObjMgr]
RequestServerName =
2.
[Local]
DockConnString =
In both the cases you need to mention the Application server name .
Kindly let me know if this actully solves your issue.
Thanks
Vishal -
The Server is Busy or Unavailable- how do I get rid of this message?
The Server is Busy or Unavailable- how do I get rid of this message?
This appears even on games, there doesn't seemed to be a way to disable it.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?
You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
I want to troubleshoot what causing the connection unstable between workstation and server. When i try do the ping test, the reply sometime 'Request timed out' Any idea what likely the cause of this issue?
I tried change network adapter, change network cable, change network port, reassign different ip address to the server. Still the result remain. I got another server on the same rack and same ip segment(base), but the other server is ok.
Any idea on this guys?
Thanks.Hi S.Akmal,
The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
More information:
Internet Control Message Protocol (ICMP) Basics
https://support.microsoft.com/en-us/kb/170292
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to share internet if the server connects to it via VPN?
Hi, mac brothers! Need your help.
I have a server with 2 ethernet cards (en0, en1). It connects to internet via VPN on en0. LAN clients connect to the server using en1. I can't share VPN internet connection to LAN %(. (tried to find the answer in the 10.4 server documentation, but there is nothing about it).
I know how to share internet connection when there is no VPN - direct connection via DSL modem...
Can you help me?
PS; 0S X Server 10.4.11You need to use NAT and have the firewall running.
And then you need to use the VPN connection (PPTP?) "interface" (when connected), probably ppp0 - not en0, in your NAT config. This can be achieved by dragging the config (small symbol in lower right corner in NAT config in Server Admin) to the desktop, edit it (look for en0 and change it to ppp0), save it, and then drag it back into the NAT config window and save.
I think the VPN tunnel must be up before turning on NAT/firewall so if you reboot the server you might need to turn NAT/firewall off -> on to make it work again.
If the WAN/ppp0 IP is not static (so you can enter it in your server DNS) you probably will have trouble with many of OS X services running in the server.
Most OS X server installations using an Internet connection with a shifting public IP is better off by putting a NAT router which can do the in initial connection (by DHCP, PPTP, PPPoE, whatever), between it and the Internet. -
Cannot email mesage using the server....
Occasionally, I can't send mail from the mac. Same server works much of the time. This am I REALLY need to send an email and can't. It's frustrating. Could move the info to the pc and try...
server=smtp.centurytel.net
Connection doctor says all okay.I think you have answered your own question.
If the server works most of the time it is a problem with CenturyTel and you should be raising **** with their technical support. Especially if Connection Doctor confirms everything is OK.
It's not likely to be an error on the Mac side and they can confirm the correct settings with you.
The only other option if you need to send that mail NOW is to go to CenturyTel website and see if they have a webmail interface. You can send it that way until you can fix the other issues. -
How can I find out the server port for a secured FTP site and creating a FTP Connection Manager
I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please VoteHi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!
Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location. -
Oracle vm manager 3.3.1 can't discover the server which one has reinstall system
It couldn't to import the iso file to the Repositories,and I doubt that the nfs which it created by the disks of ovm server has some problem .So the ovm
server has reinstalled system.
There's the log from the ovm server on /var/log/ovs-agent.log
[2015-02-09 15:39:23 31263] ERROR (notificationserver:240) Error sendinging statistics: Unauthorized {"message":"AUTH_000003:Necessary authorization
information was not supplied.","errorCode":"AUTH_000003","cause":null,"wsErrorCode":"AUTH_INFO_NOT_SUPPLIED"}
[2015-02-09 15:39:52 31263] DEBUG (notificationserver:192) sent events: [('{CLUSTER} {MONITOR} Cluster state changed from [Unknown] to [Offline]', {
}), ('Feb 7 08:33:39 {NETWORK} net : LINKCHANGE : eth0 (0) [1]\n', {}), ('Feb 7 08:33:40 {NETWORK} net : LINKCHANGE : bond0 (0) [1]\n', {}), ('Feb
7 08:34:57 {NETWORK} net : LINKCHANGE : eth0 (1) [0]\n', {}), ('Feb 7 08:34:57 {NETWORK} net : LINKCHANGE : bond0 (1) [0]\n', {})]
[2015-02-09 15:39:52 31263] ERROR (notificationserver:201) Error sending events: Unauthorized {"message":"AUTH_000003:Necessary authorization inform
ation was not supplied.","errorCode":"AUTH_000003","cause":null,"wsErrorCode":"AUTH_INFO_NOT_SUPPLIED"}
Traceback (most recent call last):
File "/usr/lib64/python2.6/site-packages/agent/daemon/notificationserver.py", line 193, in event_sender
session.post(events_formatted)
File "/usr/lib64/python2.6/site-packages/agent/daemon/notificationserver.py", line 63, in post
return self._do_post(data)
File "/usr/lib64/python2.6/site-packages/agent/daemon/notificationserver.py", line 81, in _do_post
raise Exception('%s %s' % (response.reason, content))
Exception: Unauthorized {"message":"AUTH_000003:Necessary authorization information was not supplied.","errorCode":"AUTH_000003","cause":null,"wsErr
orCode":"AUTH_INFO_NOT_SUPPLIED"}
[2015-02-09 15:39:53 31263] ERROR (notificationserver:240) Error sendinging statistics: Unauthorized {"message":"AUTH_000003:Necessary authorization
information was not supplied.","errorCode":"AUTH_000003","cause":null,"wsErrorCode":"AUTH_INFO_NOT_SUPPLIED"}
The message is from ovm manager.
OVMAPI_4025E Attempt to send command: get_api_version to server: 10.189.209.222 failed due to errors authenticating to the server. OVMAPI_4004E Sync command failed on server: 10.189.209.222. Command: get_api_version, Server error: org.apache.xmlrpc.XmlRpcException: I/O error while communicating with HTTP server: Received fatal alert: handshake_failure [Mon Feb 09 15:14:59 CST 2015] [Mon Feb 09 15:14:59 CST 2015]
Please ,help me!Frank,
Sorry I didn't see this before, but it wasn't on the most recent posts. Please see related post here OVM Sparc - Can't discover local disks
The net is that the initial support for Oracle VM Manager with Oracle VM Server for SPARC only supports NFS for repository (and virtual disks). A later release will permit virtual disks from FC SAN, iSCSI, and local disk as well as NFS. The linked not provides more information and a link to beta code. regards, Jeff -
Hi all,
We have been battling a problem for the last couple of days when we try to add the first windows server 2012 DC to an already existing Domain.
The Server installation goes smoothly and we can add the computer to the domain and its all green.
After we promote the server to a domain controller the WinRM service starts acting up (not responding anymore).
The server manager console shows Remote Management as disabled, and when we try to enable it via the console or Powershell it freezes up.
The AD DS part of the console is saying that there are post-promotion tasks that need to be completed but once we click on the task it takes us to the promotion wizard again, that basically complains that: Failed to open the runspace pool. The Server Manager
WinRM plug-in might be corrupted or missing.
In the Remote Management Event log we see the following entry: "The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)" Event ID 138
We are unable to do anything with the server (demote, add roles, remotely manage...). We tryed the following already:
1. Recreate from scratch
2. Checking the GPOs to see if there is anything setup about RM -> came up with nothing
We just ran out of ideas so HELP PLEASE !
BR
Tomaz PraprotnikHi Cicely,
Yes the error from the Windows Remote Management event log contains (I took out the User and FQDN of the Computer):
Log Name: Microsoft-Windows-WinRM/Operational
Source: Microsoft-Windows-WinRM
Date: 3/29/2013 1:38:53 PM
Event ID: 138
Task Category: Response handling
Level: Error
Keywords: Client
User:
Computer:
Description:
The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
<EventID>138</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>10</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000002</Keywords>
<TimeCreated SystemTime="2013-03-29T12:38:53.786357100Z" />
<EventRecordID>6876</EventRecordID>
<Correlation ActivityID="{18FCFBD2-2B38-0003-D261-FD18382BCE01}" />
<Execution ProcessID="1084" ThreadID="2924" />
<Channel>Microsoft-Windows-WinRM/Operational</Channel>
<Computer></Computer>
<Security UserID="" />
</System>
<EventData>
</EventData>
</Event>
There is also another entry that sometimes comes up:
Log Name: Microsoft-Windows-WinRM/Operational
Source: Microsoft-Windows-WinRM
Date: 3/29/2013 1:36:34 PM
Event ID: 142
Task Category: Response handling
Level: Error
Keywords: Client
User:
Computer:
Description:
WSMan operation Invoke failed, error code 2150859046
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
<EventID>142</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>10</Task>
<Opcode>2</Opcode>
<Keywords>0x4000000000000002</Keywords>
<TimeCreated SystemTime="2013-03-29T12:36:34.076973400Z" />
<EventRecordID>6869</EventRecordID>
<Correlation ActivityID="{18FCFBD2-2B38-0001-F328-FD18382BCE01}" />
<Execution ProcessID="4888" ThreadID="4392" />
<Channel>Microsoft-Windows-WinRM/Operational</Channel>
<Computer></Computer>
<Security UserID="" />
</System>
<EventData>
<Data Name="operationName">Invoke</Data>
<Data Name="errorCode">2150859046</Data>
</EventData>
</Event>
Best regards
Tomaz Praprotnik -
Java Component to show the thumbnail of images in the server
I would like to know what java component should i use to showt he thumbnail of images in the server. I am using netbean 5.5 and i cannot see if there are any suitable java swing component for this purpose. Please advice.
n.b. I am writing a java applet application.
Thank you.Please take time to understand the consequences of my response in http://forum.java.sun.com/thread.jspa?threadID=5173925&tstart=0 before going any further.
-
[BPC 7.0 SP3] Issue to restore a backup using the server manager
Hello,
I'm faced with a contraignant issue. I'm trying to restore a previous back up done with the server manager but I get the following error message at the "fileDB" step :
"Cannot find the Appset or cannot copy files" with a red cross "FileDB : Fail
I checked the fileDB folder, no files in use by another process.
I also tried to run a full optimize before running a new back-up, but the restore still failled.
Has someone already been faced with this problem ?
Kind regards,
LionelThank you Petar for this reply.
In the file DB I have just a temp file in each subfolder related to the applications, so yes it empty.
So, I understand that you suggest to use the FileDB of the apshell in place of the second's, right ?
On the other hand, I'm not sure to understand well when you talk about "blank copy". Do you mean I just have to create an empty folder and make a zip archive ?
If so, do I have to create the subfolders and the temp files before making the archive ?
Besides, what is the usefulness of these temp files located in each subfolders ?
Thank you again for your very useful help.
Lionel
Maybe you are looking for
-
How do I stop i-tunes from changing the genres for my songs without my consent?
Lately, itunes has been taking the genres I've set for my songs and changing them without my consent or say so. I change them back to what I want, i-tunes changes it back to what it wants, etc.. For example, I might list something as "Rock", but i-
-
Use Mobile Data For: Settings - Why does Settings need a cellular data connection?
iPhone 5 iOS 8.1 Settings > Mobile > Use Mobile Data For: Settings Just curious, why does the iPhone need this turned on? Why does the settings app need a cellular mobile data connection? If you turn it off, you're pestered to turn it on every time y
-
GetSelectedRowKeys() returns more than one on Single Selection Tree Table
Hi, I found that this issue occurring after PS3 (I think.) I have a tree table component, which allows single row selection. There is a listener on a column of the tree table as follows: public void listenPackageUnit(ValueChangeEvent valueChangeEvent
-
IPhone5s - yahoo email not loading
As of yesterday morning my yahoo email stopped loading. So I deleted the account and added it back. Now it won't get any mail. I have reset the phone and also reset my network settings. any suggestions welcome. Thanks
-
How to know for sure something was made in Flash?
If you right-click on a game of movie in a website and see a box with the bottoim line "About Adobe Flash Player..." does that necessarily mean that the content was made with Flash (Either Flash Pro, Flash Builder, FDT, Flash Develop)? Does it mean t