The synchronisation of mediathek from the PC to the new IPad doesn't work.

Hello community
I've several Apple products is use, and so far I had no problems to get them synchronised or updated. I have on all of them the same music tiltles and apps.
Yesterday I got a brand new IPad2 - WiFi 16 GB.
And now I have some problems with the synchronisation of the mediathek from the PC to the IPad.
It doesn't work. It shows the recommeded audio space, after starting the synchronisation it counts 5 steps of the synchronisation in the top bar of the screen;
when it's finished, the recommendd space indication goes away, and the IPad is still "empty*. Exception: Some bought-in titles.
I've checked several websites, but non of them was really useful. By the way, I've already updated the IPad as well as ITunes to the most acutal software release.
and I've alredays reset the IPad back to the factories setting..
Is there any good idea what I could do ??

That is bizarre. Do you have any add-ons that change the default tab behavior? If so, try disabling them temporarily and see whether that helps.

Similar Messages

  • The hotspot on my new iPad doesn't work. It doesn't even show.

    I don't know if it is the internet card but I am using vodafone HU and I don't know if it allows it.

    As I said on your previous thread, try contacting your carrier to see if they support it on the iPad (and not just on the iPhone) and whether it's an extra fee/subscription, and you can check for carrier updates via Settings > General > About

  • Copy from Time machine to an new iMac doesn't Work ?

    I bought a new iMac and want to copy from time machine that is on an external disk. Copying stops after 10 minutes. What to do?

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

  • I am able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. How can I fix that?

    I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?

    Hi there mayway3000,
    You may find the troubleshooting steps in the article below helpful.
    iPod does not play content purchased from the iTunes Store
    http://support.apple.com/kb/TS1510
    -Griff W.

  • I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help.  Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive. 

  • Is there a way of "merging" songs in iTunes. Several times, I have downloaded from the Internet, or recorded from CDs, then found the tracks broken up to appear as separate "Albums". I have a 5-movement symphony, which appears as 5 separate songs?

    Is there a way of "merging" songs in iTunes? Several times, I have downloaded recordings from the Internet, or recorded from CDs, then found the tracks broken up to appear as separate "Albums". I have a 5-movement symphony, which appears as 5 separate songs - Irritating!

    Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • HT1296 How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and the back up the phone again...

    How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.

    Copy everything from your backup copy of your old computer.

  • I synced iTunes from my computer to a new iPad. All of my purchases appear and are listed as downloaded, but none of the will play. Any ideas?

    I synced iTunes from my computer to a new iPad. My purchased music appears as normal in the list and is designated as downloaded, but none of it will play.  Any ideas of what I can do?

    try resetting the device by holding down the home and sleep key, past the red power down slider and until you see the silver apple. Let it reboot and see if that helps.
    Also, try finding a free app, any free app, download it on your ipad then see if that gets your others to work.You can delete the free app if it works (or if it doesn't for that matter)

  • The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked

    The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked - what can be done to solve?

    Couple of things to check:
    You are using Outlook 2003, 2007 or 2010
    You have selected to sync Calendars and Contacts with Outlook on the Info tab of your iTunes sync settings
    You have selected your Outlook calendar as the default claendar on your iPhone (in Settings>Mail,Contacts,Calendars>Default Calendar)
    If all that is correct and iTunes still won't sync correctly, you might have to try reinstalling Outlook.  Another option is to enable iCloud syncing with Outlook (see http://www.apple.com/icloud/setup/).  This requires Outlook 2007 or 2010.  If you decide to sync using iCloud but sure to disable contacts and calendar syncing in iTunes on the Info tab of your sync settings.  Do not try to sync with both Outlook and iCloud or you will end up with duplicates in your contacts and calendar.
    For syncing Ringtones confirm that:
    The file is really a ringtone (right-click the file in iTunes, select Get Info, on the Summary tab it should say "Kind: Ringtone".
    You have checked each of the ringtones you want to sync
    You have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings
    You have checked Sync Tones on the Tones tab of your iTunes sync settings

  • How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

    Hello,
    How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
    I have tried several tutorials but these either:
    - show correction in premiere sequence (which is not practical; given the huge number of files we have)
    - or show the editing in audition of a sequence, not the clip.
    We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
    Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

    if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes.  there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
    premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time.  since there is no dynamic link, its not possible to bring merged clips into audition.
    Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
    Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
    Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
    this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

  • Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

    Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

    Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
    1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
    2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

  • I used to have over 600 songs in my library- 50 or so puchased via i tunes and the rest painstakingly uploaded from CD's over the years. Since signing up to i cloud the only songs are the ones purchased. Have the others permanently gone?

    I used to have over 600 songs in my library- 50 or so puchased via i tunes and the rest painstakingly uploaded from CD's over the years. Since signing up to i cloud the only songs are the ones purchased. Have the others permanently gone?
    If I take the time to upload them all again will the same thing happen?

    Try DFU mode and then restore               
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If still problem try on a another computer to help determine if computer or iPod problem.
    The take action accordingly. If iPod then get Apple to exchange it at no cost.

  • I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

    I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

    Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
    It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
    I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
    Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
    Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
    Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
    Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
    14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P   Mac OS X (10.3.9)   System 7 Rocked!

  • The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b...

    Hi All
    I formatted and installed Win8.1 (64-bit) recently on my PC but have constantly had BSOD with faults like:
    Log Name:      System
    Source:        Microsoft-Windows-WER-SystemErrorReporting
    Date:          27/11/2014 09:40:21
    Event ID:      1001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      PC1
    Description:
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8025714c975, 0xffffd001186a85f0, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 112714-32125-01.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
        <EventID Qualifiers="16384">1001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-27T09:40:21.000000000Z" />
        <EventRecordID>8488</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>System</Channel>
        <Computer>PC1</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">0x0000003b (0x00000000c0000005, 0xfffff8025714c975, 0xffffd001186a85f0, 0x0000000000000000)</Data>
        <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
        <Data Name="param3">112714-32125-01</Data>
      </EventData>
    </Event>
    I've had others but this is the most recent. I ran the Nvidia scanner and loaded the video drivers it recommends (340.52). I've got two GeForce 8800GTX cards connected with SLI cable. I've tried turning SLI off as well. I also removed and re-seated the cards.
    I also just replaced the RAM with another 4GB brand new from a supplier (240pin DDR2 DIMM UNBUFF.PC2 - 6400 CL6).
    It crashed about once a day, totally randomly, sometimes when idle.
    I zipped a copy of the DUMP file and MSINFO32 file to my OneDrive but I don't know if I need / how to share it (please advise if necessary).
    I would be very grateful for a solution.
    Regards
    Mark 

    Ok, here is what I think. The MEMORY.DMP you provided was older and basically less helpful than what was recorded in the MSIinfo file. You are on the right track in your thinking that the crashes are related to
    GeForce 8800GTX cards, so I am going to suggest an uninstall and "clean" reinstall of the current driver.
    If no joy, try an older driver.
    btw, apologies for the voluminous post...
    25/11/2014 12:31 Windows Error Reporting Fault bucket
    AV_nvlddmkm!CNvLChannelNonLegacy::pipelineGPFifoBlit, type 0&#x000d;&#x000a;Event Name:
    BlueScreen&#x000d;&#x000a;Response:
    http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_nvlddmkm!CNvLChannelNonLegacy::pipelineGPFifoBlit&State=1&ID=e2e8a1cf-86d8-4a37-806c-7d971c8a16d6&#x000d;&#x000a;Cab Id: e2e8a1cf-86d8-4a37-806c-7d971c8a16d6&#x000d;&#x000a;&#x000d;&#x000a;Problem
    signature:&#x000d;&#x000a;P1: d1&#x000d;&#x000a;P2: fffffffffffffff1&#x000d;&#x000a;P3: 2&#x000d;&#x000a;P4: 1&#x000d;&#x000a;P5: fffff801ca3d1440&#x000d;&#x000a;P6: 6_3_9600&#x000d;&#x000a;P7: 0_0&#x000d;&#x000a;P8:
    768_1&#x000d;&#x000a;P9: &#x000d;&#x000a;P10: &#x000d;&#x000a;&#x000d;&#x000a;Attached files:&#x000d;&#x000a;C:\Windows\Minidump\112514-33906-01.dmp&#x000d;&#x000a;C:\Users\Mark\AppData\Local\Temp\WER-95625-0.sysdata.xml&#x000d;&#x000a;C:\Windows\MEMORY.DMP&#x000d;&#x000a;C:\Users\Mark\AppData\Local\Temp\WERCED4.tmp.WERInternalMetadata.xml&#x000d;&#x000a;&#x000d;&#x000a;These
    files may be available here:&#x000d;&#x000a;C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_d1_a7d30b578e595ab79ff817b74f971d37c1e8e_00000000_cab_10a9e058&#x000d;&#x000a;&#x000d;&#x000a;Analysis symbol: &#x000d;&#x000a;Rechecking
    for solution: 0&#x000d;&#x000a;Report ID: 112514-33906-01&#x000d;&#x000a;Report Status: 0&#x000d;&#x000a;Hashed bucket:
    24/11/2014 17:22 Windows Error Reporting Fault bucket AV_nvlddmkm!vblankCallback, type 0&#x000d;&#x000a;Event Name: BlueScreen&#x000d;&#x000a;Response:
    http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_nvlddmkm!vblankCallback&State=1&ID=f616ba0f-2c01-41f5-bfc4-82489997cecc&#x000d;&#x000a;Cab Id: f616ba0f-2c01-41f5-bfc4-82489997cecc&#x000d;&#x000a;&#x000d;&#x000a;Problem
    signature:&#x000d;&#x000a;P1: d1&#x000d;&#x000a;P2: 5e&#x000d;&#x000a;P3: 6&#x000d;&#x000a;P4: 1&#x000d;&#x000a;P5: fffff80075721912&#x000d;&#x000a;P6: 6_3_9600&#x000d;&#x000a;P7: 0_0&#x000d;&#x000a;P8:
    768_1&#x000d;&#x000a;P9: &#x000d;&#x000a;P10: &#x000d;&#x000a;&#x000d;&#x000a;Attached files:&#x000d;&#x000a;C:\Windows\Minidump\112314-37250-01.dmp&#x000d;&#x000a;C:\Users\Mark\AppData\Local\Temp\WER-86718-0.sysdata.xml&#x000d;&#x000a;C:\Windows\MEMORY.DMP&#x000d;&#x000a;C:\Users\Mark\AppData\Local\Temp\WER684A.tmp.WERInternalMetadata.xml&#x000d;&#x000a;&#x000d;&#x000a;These
    files may be available here:&#x000d;&#x000a;C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_d1_79675c223622dece3b44f5ae297e5b3f6af5349_00000000_cab_04d8b9c0&#x000d;&#x000a;&#x000d;&#x000a;Analysis symbol: &#x000d;&#x000a;Rechecking
    for solution: 0&#x000d;&#x000a;Report ID: 112314-37250-01&#x000d;&#x000a;Report Status: 0&#x000d;&#x000a;Hashed bucket: 
    23/11/2014 18:03 Windows Error Reporting Fault bucket , type 0&#x000d;&#x000a;Event Name:
    BlueScreen&#x000d;&#x000a;Response: Not available&#x000d;&#x000a;Cab Id: 0&#x000d;&#x000a;&#x000d;&#x000a;Problem signature:&#x000d;&#x000a;P1: d1&#x000d;&#x000a;P2: 5e&#x000d;&#x000a;P3:
    6&#x000d;&#x000a;P4: 1&#x000d;&#x000a;P5: fffff80075721912&#x000d;&#x000a;P6: 6_3_9600&#x000d;&#x000a;P7: 0_0&#x000d;&#x000a;P8: 768_1&#x000d;&#x000a;P9: &#x000d;&#x000a;P10: &#x000d;&#x000a;&#x000d;&#x000a;Attached
    files:&#x000d;&#x000a;C:\Windows\Minidump\112314-37250-01.dmp&#x000d;&#x000a;C:\Users\Mark\AppData\Local\Temp\WER-86718-0.sysdata.xml&#x000d;&#x000a;C:\Windows\MEMORY.DMP&#x000d;&#x000a;C:\Users\Mark\AppData\Local\Temp\WER684A.tmp.WERInternalMetadata.xml&#x000d;&#x000a;&#x000d;&#x000a;These
    files may be available here:&#x000d;&#x000a;C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_d1_79675c223622dece3b44f5ae297e5b3f6af5349_00000000_cab_0d89e73e&#x000d;&#x000a;&#x000d;&#x000a;Analysis symbol: &#x000d;&#x000a;Rechecking
    for solution: 0&#x000d;&#x000a;Report ID: 112314-37250-01&#x000d;&#x000a;Report Status: 100&#x000d;&#x000a;Hashed bucket: 
    24/11/2014 17:22 Windows Error Reporting Fault bucket -421640870, type 5&#x000d;&#x000a;Event Name:
    PnPDeviceProblemCode&#x000d;&#x000a;Response: Not available&#x000d;&#x000a;Cab Id: 0&#x000d;&#x000a;&#x000d;&#x000a;Problem signature:&#x000d;&#x000a;P1: x64&#x000d;&#x000a;P2:
    PCI\VEN_10DE&DEV_0191&SUBSYS_22501682&REV_A2&#x000d;&#x000a;P3: {4d36e968-e325-11ce-bfc1-08002be10318}&#x000d;&#x000a;P4: 0000001F&#x000d;&#x000a;P5: BasicDisplay.sys&#x000d;&#x000a;P6: 6.3.9600.16384&#x000d;&#x000a;P7:
    08-22-2013&#x000d;&#x000a;P8: &#x000d;&#x000a;P9: &#x000d;&#x000a;P10: &#x000d;&#x000a;&#x000d;&#x000a;Attached files:&#x000d;&#x000a;C:\Windows\Temp\DMID706.tmp.log.xml&#x000d;&#x000a;C:\Windows\Temp\LOGD727.tmp&#x000d;&#x000a;C:\Windows\Inf\display.inf&#x000d;&#x000a;&#x000d;&#x000a;These
    files may be available here:&#x000d;&#x000a;C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_x64_24eb8c9ed87f37eac11320981cbf81446b69288_00000000_cab_0764d745&#x000d;&#x000a;&#x000d;&#x000a;Analysis symbol: &#x000d;&#x000a;Rechecking
    for solution: 0&#x000d;&#x000a;Report ID: 54413262-6e57-11e4-824e-c58295c96ec1&#x000d;&#x000a;Report Status: 8&#x000d;&#x000a;Hashed bucket: adb5d63b7478974f8d85c5ec03d74566 
    Sorted by: Device ID
    Device Id
    Chip Description
    Vendor Id
    Vendor Name
    0x0191
    SIS191
    0x1039
    Silicon Integrated Systems
    0x0191
    NVIDIA GeForce 8800 GTX
    0x10DE
    NVIDIA
    0x0660
    HD Audio
    0x10EC
    Realtek Semiconductor Corp
    0x0191
    CMI 8738 8CH Sound Card
    0x13F6
    C-Media Electronics Inc.

Maybe you are looking for

  • The file is damaged and could not be repaired when smartforms convert to pdf

    i m using your code but error is occur please  help me when i goto sost and open my pdf file at that time give error message my whole program is below report  ypayment_advice2. tables : bsak,skat. types : begin of t_bsak,        belnr type bsak-belnr

  • Premiere Pro 2.0 - output is lossy/blocky

    I've been having trouble with PP2, in that my shiny source footage exports as lossy/blocky/pixelated no matter which codec etc I use.  If I try to burn direct to DVD, I get the "insufficient space on the disc" error.  Even if I do nothing except impo

  • Transfer of Licence

    Hi I recently bought a new MacBook Pro, and want to transfer LogicPro 8 onto it. I have uninstalled it from my old computer, but the new installation on my new computer won't allow me to save the serial number, with the error: "Licensing Error The li

  • Importing from Media Player

    I'm terrible with computers...I have my entire music library on my windows media player and now want to switch everything to iTunes.  How do I go about this?  I did read somwhere that any files I import will only be copies - the original to remain wh

  • Can not activate icloud on my iphone  (no email)

    So i go to settings>icloud>account not verified> Check email then i go to email but no email sent. what am i my doing wrong?