The system can be contact, but there is no Central Management Server
Please help me, I have an error in SAP BusinessObjects XI 3.1 in Linux. I changed by web in CMC the ports of CentralManagementConsole, InputFileRepository and OutputFileRepository in order to assign an specific port, after that I restarted the servers and now I have this error.
Couldn't logon to CMS STU00152
The system can be contact, but there is no Central Management Server running at port 6400
I donu2019t know where I should change that by commands in Linux because I cannot enter to CMC and change like before. Please help me.
Regards,
Paulina Villacis
Thanks Ashwini,
I have used this command but it does not work
initialli I found this command line like that
Local CMS
Name: Q_SIA_1.CentralManagementServer
Port: 6400
Auto-Start: yes
Command Line: -loggingPath /swbobj/bobje/logging/ -defaultlocale en -port 6400
I think this command line is incorrect because the port is repeated
-loggingPath /swbobj/bobje/logging/ -defaultlocale en -port 6400
I changed the command line to
u2013loggingPath /swobj/bobje/logging/ -defaultlocale en
but I donu2019t know why after I safe it, it is the same with u2013port 6400, I think this is the issue. Do you know where also I must to change in order to fix the CMS to port 6400.
Regards,
Paulina Villacis
Similar Messages
-
The system [servername] can be contacted, but there is no CMS running...
I have been receiving this error message at least twice a week upon my login to the Central Management Console:
"The system [servername] can be contacted, but there is no Central Management Server running at port 6400."
Each time I received this message, I will go to the server and the services (tomcat) is still running. What I will have to do is to restart it manually. I too have configure so that the services can restart if it fails, but it does not restart automatically. I have to restart it manually again.
I have searched in google and this forum for help, I am still a little lost.
Please advice.
Many thanks in advance.
Edited by: Stevia Tjin on Nov 27, 2008 3:37 AMHi there,
To answer your question, the server has 4GB memory with Xeon Processor 3GHz. The server has tomcat installed - that is all. There are no other applications/databases running in that server.
What should I do now?
Regards,
Stevia -
Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.
Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem. -
My Firefox crashes frequently, but I the system can not find the reports to send for analysis.
My Firefox crashes frequently, The system goes to the grayed screen and sits there until I try to close it, then it says "Firefox not responding" and I close the program. When I go to "about:crashes" it says the report was submitted, but I never get any feedback and when I try to retrieve the report to look at it, the system can never find it. This happens at least twice daily. It keeps searching for a while, then displays the gratituous "Oh Noes. The report could not be located" message. I've included the latest crash report address.
Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I am in my icloud; I can track my phone and see my Contacts, but there's no emails. What am I doing wrong?
Not sure we're speaking the same language (my fault), but let me try again: I launched Firefox, logged into icloud.com and gone to the mail page to find no emails there. We have a home wifi network, and our iPad and iPhone are synched with our home email on the home computer. In the iPad settings under iCloud I turned the email slider to "ON", and it uploaded the calendar and contacts to the iCloud, but not the email.
And to answer your question above - I can't tell if we've moved the incoming emails to a local folder. Perhaps that happened when the email was set up (a long time ago). I just assumed that if it appears on the iPad, then it should appear on the iCloud.
The iPhone settings would not let me slide the email slider to "ON": does that block the emails somehow?
Thanks for any help or thoughts - -
There are text messages that I'm having trouble deleting. With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!
But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync. -
I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help? Can't get fusion to work.
ellerfrau wrote:
I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help? Can't get fusion to work.
I'd suggest being more specific. What do you mean by "it seems to have thrown windows out of the system?" The Windows virtual machines should still be in the Virtual Machines folder in your documents folder. Are they there? What version of Fusion have you updated from and to?
You might also consider raising your question in the VMware Fusion forum: http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions&sta rt=0. -
"the system can't find the disk", but it's always connected without touching it! Can anyone help me?!
I tried to reset the ipod but I cannot syncronize the new music I added.
Could it be a problem of the songs or the ipod?Assumng you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Just a few minutes ago i tried to purchase from The Simpsons tapped out game, but there were a warning that my purchese was declined and i was asked to re-filled the payment info in order to compete my purchase. I did that but that wont work and the warning keep showing up. Whats wrong? help please.. Is there any correlation with the software update? I did check the update , there is an update for iOS 6.0.1 .
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
The field "GLTPC" is unknown, but there is a field with the similar name*
Hi all
When i am running the report painter reports in SAP
i am getting this error .
Syntax error in program SAPFGRWG
in include FGRWGE60
in line 19
Last changed by SAP
Author SAP
The field "GLTPC" is unknown, but there is a field with the similar name
"GLTPC".*
Please help me whenever
Regards,
suchithra
Edited by: Rob Burbank on May 22, 2009 9:00 AMHi All
All 8A group Report painter reports i.e GLPCt table Reports are not executed properly
Can you please help me out
Regards,
suchithra -
my spreadsheet created with numbers program version 3.0 created on my mac won't work on my ipad version 2.0. It says I have to save the file with preview option but there is no such option in preferences. Any thoughts?
For the update to run Aperture must be installed in the system Application folder and named simply Aperture, not Aperture3.2.2 or anything else.
I don't know if this would also affect photo stream but if your Aperture is misnamed or installed in an incorrect location fixing that to see if it clears up the problem would be a good first step. -
what if i want to delete an app; i tap and hold the app until it jiggle, but there's no "x" to delete.
If you're talking about deleting (as opposed to closing) an app, you do it just like on previous versions; hold until jiggle, press red X. If they're jiggling but you're not seeing the X, you may need to check your Restrictions. Some apps (Apple included) can't be deleted.
= L.I. -
Wrapper.createfile failed with error 3: The system can't find this path
Hi,
I have a problem of installing Java on my computer. I saw the error which is "wrapper.createfile failed with error 3: The system can't find this path specified."
I searched a lot of sites to solve it, but i havent found. How do I solve it ?
Thanks...Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My keyboard failed to put accents spelling.
Through the system can not recognize the keyboard. This keyboard has one year and has always worked well and suddenly became this way, what to doHi ,
Do you remember if you have installed some software prior to this issue?
Delete programs you never use.
If the issue reoccurs in Clean Boot, but works fine in Safe Mode, the cause may be the disabled hardware drivers. You may narrow down the
causes in Device Clean Boot.
Device Clean Boot
=================
1. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
2. Expand "Sound, video and game controllers".
3. Right click on your sound card and then click "Properties.
4. In the dropdown menu of Device Usage, please choose "Do not use this device (disable)" and click OK.
5. Please use the same method to disable other dubious hardware such as: internal modem, network card and CD-R drive. Please note some devices
such as video adapter are not available to be disabled.
Tracy Cai
TechNet Community Support -
How do I save a scan file in OS X Maverick? The file can be saved, but not readable.
How do I save a scan file in OS X Maverick properly? The file can be saved, but not readable.
I've never had a problem with that. What does the error message say when you try to open it?
Maybe you are looking for
-
Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message.
-
Using multiple Apple ids for iTunes match
Hi, I have one Apple id that I use for downloading music and apps on both iTunes and my ios devices, as well as itunes match. I have another that I use for for icloud. My iTunes match subscription is due to expire and I want to use my icloud apple id
-
Dear , All Experts. I have one scenario in which my asset got capitalized through legacy. Asset was uploaded with around 1 lakh rupees. Later on many transactions posted on same asset and it has book value now 21 Lakh which should not be ! Now my use
-
Workflow notification mailer not starting after APPS pwd change
Workflow notification mailer not starting after APPS pwd change The error in the WFMAILER log is [appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt wferr: - WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS cpid=1300061, logfile=/abprod/comn/admin
-
Nokia 920 on Pay Mountly account does not work in Europe..again.
So this is the second holiday I have gone on with my Nokia 920 and its not worked in Europe.I've had phone and account for well over a year now.Am on a Pay monthly deal and activated the "Euro Talk & Text Booster" before I left. Checking my account