"The system cannot find the file specified" - New to MVSE 2013

Hey all, 
I have downloaded Visual Studio Express 2013 for Windows Desktop and am currently working my through the introduction sessions on: http://www.cplusplus.com/doc/tutorial/program_structure/
I did not get far before i encountered this error whilst trying to run my segment of code. I am completely new to all this so please bear with me :)
The error window said:
"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
The system cannot find the file specified.
Would love some simplified help please if this is indeed the right area of the forum to post this in.
Many thanks!

Hi Jono112,
>>"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
Based on your issue, to check if the issue is related to the VS IDE or your specified C++ project, I suggest you can refer the following MSDN document to check if you get same issue.
https://msdn.microsoft.com/en-us/library/ms235629.aspx
(1)you get same error in the new c++ console application, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get the issue in the new c++ console, so I suggest you try to clean and build your c++ console application, then debug it again.
Or you can upload your C++ console application to OneDrive and then copy link here, we will reproduce your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • „The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

    Hello,
    we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
    in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
    On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
    server, but copied the folders that were changed on the new server to keep them up to date.
    Now creating a controlled Group Policy from a template causes the error
    „The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
    The following things do work:
    - editing a controlled policy
    - renaming a controlled policy
    - check in/check out of a policy
    - set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
    - deletion of a controlled policy
    - creating a template from a policy
    Thank you in advance for your help.

    0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
    properly configured.
    sharing some manuals @: http://1drv.ms/1kk6u6j

  • Error message on my development workstation: The system cannot find the file specified.

    Post Author: cseverin
    CA Forum: Crystal Reports
    Hi,
    I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database.  I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue.  The problem seems to be with Crystal Reports. 
    I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it.  I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them.  All worked fine. 
    To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report.  After doing this, the preview no longer worked.
    Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it.  In the code behind the page I wrote:
    Option Strict On
    Imports System.Data
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Partial Class Reports
         Inherits System.Web.UI.Page
         Private objOpenFilesreport As OpenFilesReport
         Private rptOpenFiles As ReportDocument
         Private strLastErrorMessage As String = Nothing
         Private errLastException As Exception = Nothing
         Dim strFileKey As String
         Dim strJurisdictionCode As String
         Dim strStaffId As String
         Dim strReportId As String
         Private Sub ConfigureCrystalReports()
              Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
              Dim rptopenfiles As New ReportDocument
              rptOpenFiles.Load(reportPath)  <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
              Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
              ConnectionInfo.DatabaseName = my database
              ConnectionInfo.UserID = login id of user
              ConnectionInfo.Password = user's password
              SetDBLogonForReport(ConnectionInfo, rptopenfiles)
              CrystalReportViewer1.ReportSource = rptopenfiles
         End Sub
         Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
             ConfigureCrystalReports()
         End Sub
         Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
              Dim myTables As Tables = myReportDocument.Database.Tables
              For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                   Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                   myTableLogonInfo.ConnectionInfo = ConnectionInfo
                   myTable.ApplyLogOnInfo(myTableLogonInfo)
              Next
         End Sub
    End Class
    I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it.  When I run the website in Visual Studio and click on the hyperlink I get the following:
    Server Error in '/MyTest' Application.
    The system cannot find the file specified.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
    &#91;COMException (0x80004005): The system cannot find the file specified.
    &#93;
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
    &#91;Exception: Load report failed.&#93;
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
       CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
       CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
       CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
       CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
       CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
       System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
    Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832 
    Any ideas, anyone?
    Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file.  I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries.  But how do I call these functions at the time the report is run?
    This is my first Crystal report written in .NET and I've been struggling with it for days now.  Any help would be most appreciated!
    Thanks very much!
    Chris Severin

    hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

  • Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

    Hello,
    I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code  (jquery code) in content editor web part on a page, its working fine, but when I am adding
    the same code in an app, its giving me error :  "The system cannot find the file specified. (Exception from HRESULT:
    0x80070002)" - 500 Internal Server error.
    (function () {
    // This code runs when the DOM is ready and creates a context object which is
    // needed to use the SharePoint object model
    $(document).ready(function () {
    //alert('In doc ready');
    $('.attachmentButton').change(function(event){
    var listName = 'UploadTest',
    itemId = 2;
    handleFileChange(listName,itemId,event.target.files);
    function handleFileChange(listName,itemId,files){
    alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
    alert('files.length :=' + files.length);
    var filereader = {},
    file = {},
    i=0;
    //loop over each file selected
    for(i = 0; i < files.length; i++) {
    alert('In for loop');
    file = files[i];
    filereader = new FileReader();
    filereader.filename = file.name;
    alert('filereader.filename :=' + filereader.filename);
    filereader.onload = function() {
    var data = this.result;
    var n=data.indexOf(";base64,") + 8;
    //alert('n :=' + n);
    //removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
    data= data.substring(n);
    //alert('data :=' + data);
    alert('Above SPServices this.filename :=' + this.filename);
    $().SPServices({
    operation: "AddAttachment",
    listName: listName,
    asynch: false,
    listItemID:itemId,
    fileName: this.filename,
    attachment: data,
    completefunc: function (xData, Status) {
    console.log('attachment upload complete',xData,status);
    alert('Status :=' + Status);
    if (Status.toLowerCase() == "error"){
    alert(xData.responseText);
    alert(xData.status);
    alert(xData.statusText);
    filereader.onabort = function() {
    alert("The upload was aborted.");
    filereader.onerror = function() {
    alert("An error occured while reading the file.");
    //fire the onload function giving it the dataurl
    filereader.readAsDataURL(file);
    alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
    alert(xData.status); - gives error - "500"
    alert(xData.statusText); - gives error - "Internal server error"
    Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
    Any suggestions, why I am getting this error in NAPA ?

    Hi,
    According to your post, my understanding is that you have an issue about adding attachments to list items in app.
    To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
    There are two articles about retrieve the list and list items in the host web, you can refer to them.
    http://www.dotnetcurry.com/showarticle.aspx?ID=1028
    http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
    What’s more, we can also use the REST API to achieve the same scenario.
    http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

    I have restored one web application in SharePoint Server 2010 from a different domain and  can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
    that  "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
    What may be the reason? Please help me to solve this issue since I am stuck up on this .
    Regards 
    Mine1981

    Hi Nico
    Martens,
    Thank you for your reply. But
    how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
    Please help me to solve the
    issue.
    Regards
    Mine

  • Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

    Hi forum Fellows,
    I have the following failure scenario:
    1. A user receives an e-mail with an attachment.
    2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
    3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
    4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
    5. The effect is that the user cannot send the e-mail.....
    ------------------------------ TROUBLESHOOTING -----------------------
    - I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
    ---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
    ---- After: Only one file is written to OutlookTemp. That is FileX.pdf
    - Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
    **** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
    on to be there.
    - Going with a totally clean OutlookTemp folder does not help.
    ------------------ NOW WHAT ---------------
    - The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
    ------------------------------ TECH. INFO -----------------------
    Outlook 2010 v14.0.7132.5000
    Outlook bit depth: x86
    Running on a 2008R2 SP1 TS environment.
    No antivirus on the TS
    Looking forward to hear from you.
    Regards The Red Baron
    Red Baron

    Hello Red Baron,
    Although not a complete answer, the way to treat attachments in emails require some discipline:
    1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
    the new version etc.
    2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
    3. Having any (unsaved) document open for several hours should
    never occur. What if there is a power outage?
    Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
    These are the rules I teach my customers and they never leave any document unsaved for hours ...
    Best regards George

  • "The system cannot find the file specified" - error reading properties file

    I have packaged a class file and a .properties file in the same folder as a ejb-jar file and in the class file i try reading the properties file and it throws me the error - "The system cannot find the file specified". But when I put the complete path, it has no problem finding the file.
    I know that this must be the problem with classpath, but can anybody tell me why it is not finding the properties file even if they are in the same folder. How do I make class files find .properties file which are in a folder.
    Any help will be greatly appreciated.

    Hi,
    I am not sure if your question is realted to the Oracle Application Server - anyway, if you are packaging a class file and a properties file in a JAR File, you need to read the contents in a different manner...something like this... :
    URL url = new URL("jar:file:/home/duke/duke.jar!/");
    JarURLConnection jarConnection = (JarURLConnection)url.openConnection();
    You might want to have a look at this link for more information :
    http://java.sun.com/docs/books/tutorial/index.html
    You may also get better responses if you post your question in one of the Java Forums.
    Regards,
    Sandeep

  • The system cannot find the file specified!!

    hi
    i am new to java web start. i am trying to run a program which copies the contents of a text file farrago.txt to a new file in some other directory.
    i have packed farrago.txt in the jar file with the program but
    when i run the program through webstart i am getting error:
    the system cannot find the file specified(farrago.txt)
    in my program the code to read the file is:
    File inputFile = new File("farrago.txt");
    how can i access my file from the jar file??
    please help!
    zamir

    You need to read in the file using loadResource() - see:
    http://java.sun.com/products/javawebstart/docs/developersguide.html#dev

  • The system cannot find the file specified error in ftp upload

    Hi,
    i am using filezilla ftp server and apache common ftp client and while uploading a file i am getting below error:
    code to call ftp client
    String local_file ="D:\\home2.JPEG";
    String remote_file ="\\abc";
    ApacheFTPClient apacheFTP = new ApacheFTPClient();
    String[] abc ={"-s", "127.0.0.1", "Manender", "Manender", remote_file, local_file};
    apacheFTP.main(abc);
    error log:
    220-FileZilla Server version 0.9.31 beta
    220-written by Tim Kosse ([email protected])
    220 Please visit http://sourceforge.net/projects/filezilla/
    Connected to 127.0.0.1.
    USER Manender
    331 Password required for manender
    PASS Manender
    230 Logged on
    SYST
    215 UNIX emulated by FileZilla
    Remote system is UNIX emulated by FileZilla
    java.io.FileNotFoundException: D:\home2.JPEG (The system cannot find the file specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at com.po.ApacheFTPClient.main(ApacheFTPClient.java:152)
         at com.po.sample.main(sample.java:120)
    i have file in my d directory with same name.
    please help me in this.
    thanks in advace..

    i have file in my d directory with same name.Doesn't look like that? Are you sure that it isn't named e.g. home2.jpg?

  • Cannot Install this Hardware - The system cannot find the file specified.

    I got an 8G ipod touch last week. When I plug it into USB port on my PC, a Found New Hardware Wizard box pops up with "Cannot Install this Hardware", "There was a problem installing this hardware: Apple Mobile Device USB Driver", "An error occurred during the installation of the device", "The system cannot find the file specified.", "Click Finish to close the wizard.". If I go ahead and click finish, the device disappears and a couple of seconds later tries to install again and the box pops up again. However, if I leave the box alone, the ipod does actually appear in itunes and I can sync music to it, so all is not lost Any ideas though how to stop this error box popping up? The USBAAPL.SYS driver exists - I don't know what file it cannot find. Thanks.

    Hi and welcome to Discussions,
    if you have a Leopard OSX DVD you can use it to install the BootCamp 2.0 drivers and later use the BC Update 2.1 for XP to further update the drivers.
    If not (still running OSX Tiger) there are two possibilities:
    use this direct download link for the latest ATI/AMD Mobility Driver package http://ati.amd.com/online/mobilecatalyst/
    or use the ModTool found here http://www.driverheaven.net/modtool.php in conjunction with the ATI/AMD Desktop Driver package.
    You should also consider getting and installing the latest (June 2008) DirectX 9 package from Microsoft.
    Hope it helps with your gaming problems.
    Stefan

  • MDT2012 - Deployment failed, the system cannot find the file specified

    Hi everybody. 
    First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help. 
    I encounter issues with my MDT 2012 Update 1 platform. 
    I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts. 
    In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:. 
    The script is the following : 
    "%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
    But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error : 
    Litetouch deployment dailed, return code = -214767259 0x80004005
    Failed to run the action: InstallD (ie : the script above)
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    The error is on my task which uses imagex to deploy my D and E WIM.
    So I looked to see if the file's path was the good one. 
    And it is !!!
    Wizard says that the file couldn't be find, but the file is existing, and in the good path. 
    For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast. 
    I even encounter this issue if I use my MDT server and my computers on the same switch. 
    Any help would be gratefull, my client gives me the week to resolve the issue. 
    Thanks 

    BDD.LOG
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[------  Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Started.
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"    \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe"  /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
    file="LTIApply">
    <![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
    <![LOG[  Console > [  99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe"  /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Target volumes will be updated with BOOTMGR compatible bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console >     Successfully updated NTFS filesystem bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Bootcode was successfully updated on all targeted volumes.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"    \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr  /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
    file="ztiRunCommandHidden">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr  /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[  Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
    <![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

  • ORA-20100 The system cannot find the file specified 0RA-06512

    I can create and deploy a .NET stored procedure but when I run it either from Visual Studio 2005 Oracle Explorer or TOAD or SQLPlus I get the following:
    ORA-20100: The system cannot find the file specified.
    ORA-06512: at "SYS.DBMS_CLR", line 211
    ORA-06512: at "PROD.GETSEGADDRNO", line 7
    ORA-06512: at line 1
    It is basically the same C# code as the OTN sample except for accessing a table in my database.
    I found a forum thread dated 2006 with basically the same error message and it said the problem was fixed in Oracle Database patched to 10.2.0.2 but I can't find such a patch for 10g R2 Enterprise.
    This is my first time setting up Server 2003, Oracle 10g and ODT for .NET
    (I successfully created and deployed an external procedures for Oracle 8.1.7 on Windows 2000 a couple of years ago)
    This is the code:
    using System;
    using System.Collections.Generic;
    using System.Text;
    using System.Data;
    // use the ODP.NET provider
    using Oracle.DataAccess.Client;
    using Oracle.DataAccess.Types;
    namespace CLRLibrary1
    // Sample .NET stored function returning address number (ADDR_NO) for
    // a given segment number (SEG_NO)
    public class Class1
    public static int GetSegAddrNo(int segno)
    int addrno = 0;
    // Check for context connection
    OracleConnection conn = new OracleConnection();
    if (OracleConnection.IsAvailable == true)
    conn.ConnectionString = "context connection=true";
    else
    throw new InvalidOperationException("context connection" +
    "not available");
    conn.Open();
    // Create and execute a command
    OracleCommand cmd = conn.CreateCommand();
    cmd.CommandText = "SELECT ADDR_NO FROM SEG WHERE SEG_NO = :1";
    cmd.Parameters.Add(":1", OracleDbType.Int32, segno,
    System.Data.ParameterDirection.Input);
    OracleDataReader rdr = cmd.ExecuteReader();
    if (rdr.Read())
    addrno = rdr.GetInt32(0);
    rdr.Close();
    cmd.Dispose();
    conn.Close();
    return addrno;
    } // GetSegAddrNo
    } // Class1
    } // CLRLibrary1
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    was installed from the Oracle downloads site: 10201_database_win32.zip
    On Windows Server 2003 R2 Standard Edition SP2
    Oracle .NET tools was installed using: ODTwithODAC1020221.exe
    The CLR Service is running
    Deployment says that it is successfull.
    The DLL is in the expected Oraclehome\BIN\CLR folder
    The deployment script is:
    CREATE OR REPLACE LIBRARY "SYS"."ORATEST6_DLL" AS '$ORACLE_HOME\bin\clr\OraTest6.dll';
    GRANT EXECUTE ON "SYS"."ORATEST6_DLL" TO PROD;
    GRANT EXECUTE ON "SYS"."DBMS_CLR" TO PROD;
    GRANT EXECUTE ON "SYS"."DBMS_CLRTYPE" TO PROD;
    GRANT EXECUTE ON "SYS"."DBMS_CLRPARAMTABLE" TO PROD;
    CREATE OR REPLACE FUNCTION PROD.GETSEGADDRNO wrapped
    a000000
    1f
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    8
    147 138
    ePHIr6kvu6nZ9gYrxgs40akg18owg1zQf/ZqZ3QC2vjqaIs25soMp1nBmBfBj1ZboVvNkdPT
    8qhpuEVdmv4n2nlF5ynrhLsm3F0h9ZGrTQ4tGYIybWjMFxYNlDDeBOx1i7O0GviP8AxHys23
    kW8aTVA2xV8IuLNlwP7KWFw70tGbg+lUIlRhYo5WmLW6N9wcjOCeLZK6W6s6tvd4zKAQykzc
    sIsaneE0FWyV9Q1BD0yJpLoCfWH+f6fVXsne5Feyxu68k5geCJ8F5FCLm2ycvxIiKNKTIpiD
    q4wshbsYLTTPHX3F6pA=
    The parameter mapping is:
    return value int32 number
    segno int32 number
    Bob Sorrell
    [email protected]
    863-662-5524

    These are the Reference Properties for Oracle.DataAccess in the OraTest6 app:
    Aliases: Global
    Copy Local: False
    Description: Oracle.DataAccess.dll
    File Type: Assembly
    Identity: Oracle.DataAccess
    Path: c:\oracle\ora102\odp.net\bin\2.x\Oracle.DataAcess.dll
    Resolved: True
    Runtime Version: v2.0.50727
    Specific Version: False
    Strong Name: True
    Version: 2.102.2.20
    This is what GacUtil shows:
    The Global Assembly Cache contains the following assemblies:
    Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.DataAccess, Version=1.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Number of items = 2
    The GAC seems to contain both 2.102.2.20 and 1.102.2.20
    Do I need to remove one?

  • AnyConnect client and "The system cannot find the file specified" error

    Hello,
    I am trying  to connect to vpn via API (using example programs) and I get following error on start:
    Description:
    Function: RestoreProxySettingsToBrowser
    File: .\Proxy\BrowserProxy.cpp
    Line: 1025
    Invoked Function: DeleteFile
    Return Code: 2 (0x00000002)
    Description: The system cannot find the file specified.
    I cannot find any more informations and quick google search points me to anti-virus companies site. Do you know any idea what is happening here?
    Thanks,
    Nemanja

    Hi,
    I am not sure if your question is realted to the Oracle Application Server - anyway, if you are packaging a class file and a properties file in a JAR File, you need to read the contents in a different manner...something like this... :
    URL url = new URL("jar:file:/home/duke/duke.jar!/");
    JarURLConnection jarConnection = (JarURLConnection)url.openConnection();
    You might want to have a look at this link for more information :
    http://java.sun.com/docs/books/tutorial/index.html
    You may also get better responses if you post your question in one of the Java Forums.
    Regards,
    Sandeep

  • ZTI Error Unhanded error returned by LTISysprep: The system cannot find the file specified -2147024894 0x80070002

    Hi,
    I'm trying to capture an image of computer that was already imaged using MDT 2013. I tried to install the new Windows Updates and add some files to the original image but each time I try to recapture the image I get this error: "ZTI Error Unhanded error
    returned by LTISysprep: The system cannot find the file specified -2147024894 0x80070002"
    I checked the Deployment Share and I do have LTISysprep.wsf in there.

    Well, it only runs LTISysprep when you tell it you want to capture an image (via the wizard, or through the equivalent set of CustomSettings.ini parameters).
    The log you provided doesn't actually show it running LTISysprep.  In fact, it specifically shows that you specified not to capture an image:
    Property DoCapture is now = NO
    Maybe you specified to join a domain (which isn't good for capturing an image) and it skipped the wizard pane about that?
    Thanks,
    -Michael Niehaus
    Senior Product Marketing Manager, Windows Deployment
    http://blogs.technet.com/mniehaus
    [email protected]

  • ORA-27369: The system cannot find the file specified.

    I am trying to run a job in DBMS_Scheduler in 10.2.0.2 and i am getting the following error:
    ORA-27369: job of type EXECUTABLE failed with exit code: The system cannot find the file specified.
    I am trying to have it execute an external .bat file. The .bat file works fine if i execute it manually. (This is MS Server 2003)
    I created the same job in another instance and it runs fine. I took the same files directory copied it to another server (all file permissions are the same on both servers) and took the creation scripts for the job and ran them in the new database and i am getting this error when i try to run the job. There is very little information for this specific error. In the two databases all the permissions are the same for the user and the scripts all executed successfully.
    Any ideas on what is casuing this error.
    I am not sure if its Oracle thats having the problem or if Windows is somehow holding it up.
    (PS. I have permissions in the local security policy to allow 'Log on as Batch job' in both servers)

    Hi,
    A couple things.
    - Is the Job Scheduler service up and running and set to run as the right user ? If everything else is the same than maybe the service is only up on one instance ?
    - You should be calling "cmd.exe /c script.bat " and not the batch file directly. Beware that cmd.exe may be in different places in different versions of windows and you should always fill in the full path for both cmd.exe and script.bat. This could be causing the "file not found" issue.
    - Does a simple external job work ? It can be easier to get a simple external job working first e.g. ipconfig.exe or echo.exe.
    Hope this helps,
    Ravi.

Maybe you are looking for

  • Cannot view all tabs in itunes when iphone is connected

    Hi, Just after the new itunes upgrade when I plug my iphone into my computer I cannot see all the tabs. It starts with the Summary, Info, Applications, Ringtones, Music, Movies, TV Shows, iTunesU, Ph...(cannot see the rest). I tried going to Windows

  • Two errors during cancellation of AR Credit Memo with 'Free of Charge' option

    Dear all, I've created a AR Credit Memo - with Free Of Charge option established. After I've tried to cancel this document. SAP shows the following error messages: - No matching records found '' (SWEI) (ODBC -2028) [Message 131-183] - No matching rec

  • HDMI cable and wireless router for bluray

    Hi. We just purchased a Samsung Blu-ray player, model BD-C 6500. We want to connect it to our 46" samsung LED TV  and stream movies from Netflix.  I was wondering which HDMI cable would be best to use to connect it? We also havea Netgear Rangemax rou

  • 158 minute movie. What compression preset to use?

    My movie is over the 150 limit for preset on compressor. I kept on using the 150 minute setting. Bu tis there a better way? KT

  • Exception during BAPI execution

    Hello: I've been working with JCAPS, but today I'm having an exception that I cannot resolve. [#|2008-11-20T20:00:36.418-0600|SEVERE|IS5.1.2|STC.eWay.SAP.BAPI.java.lang.Class|_ThreadID=55; ThreadName=Worker: 62;|----- Error occurred during execute --