The system could not create the msg bc of an RFC connection "NONE" error

All-
I am getting this error message when I try to save and send a Service Desk message from the BSP. I have seen a few other threads on this already and have tried the recommendations.
Here is what I have tried:
1. Maintained table BCOS_CUST accordingly
2. Made sure there is an SLFN process type entry in DNO_CUST04
3. Made sure my NONE RFC is working in SolMan's SM59
4. Viewed the NONE entries in SMSY
Is there anything else I am missing? The message seem to be ending up in the crm_dno_monitor, but I am not getting the "message successfully sent to SD" when I send it.
Please advise.
Thanks

Resolved. Take a look at your action profile and make sure that Create/Change Basis Message from CRM Procedure is active. Not sure what this has to do with RFC NONE, but this is what did it.
Also check log in SLG1

Similar Messages

The system could not create any outputs for mv type 561

Hi,
I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
Chk your setting as below to get GR print out.
. Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

issue is resolved

Could not create discount document

Hello!
We are having the following error either on automatic (F110) or manual payments (F-53) when generating a discount documents:
Manual Payments error:
Could not create discount document
Message no. 8A605
Automatic Payments error:
FF848: Entry of tax for C1 000 is not possible because of tax base 0
I think that the error is generated because the tax base amount is not being completed automatically.
I have already checked discount documents customizing and I´ve founded everything ok.
Also Tax Category field for the discount GL account is completed.
Any help would be appreciated.
Regards.

Hi Nirav, thank for your answer.
I have already check that field that you mentioned.
It is exactly the way you told me.
Do you have in mind anything else?
Regards.

ERROR Could not create DOM from control.xml

Hi All,
I am installaing 4.7EE on Sun Solaris 5.9 SPARC with Oracle and JDK version is 1.4.2_08. When i am running sapinst, sapinst GUI opens and after when i am selecting the Central installtion and i click on Next it giving error message that
WARNING Could not read file control.xml. Please make sure that you called SAPinst with the correct control file (the control file is given to SAPinst as its first command line parameter or as value of the command line property SAPINST_CONTROL_URL)
ERROR Could not create DOM from control.xml
How to solve this error. I have searched in SDN but i am unable to get the solution.
Mahesh C

Hi Kiran,
I have given all permissions to the control file. But these control files are in different places /SAPINST/UNIX/SUNOS_64/PATCOL640/WEBAS630 and ORA, DB2, DB6, IND, INF, ADA in these folders i can c the Control.xml files. But i have given all read write and execute permissions but still its getting the same error. I have downloaded the same IM for 3 times and tried.. But the result is the same.
Is there any other way of work around for this...
Thanks
Mahesh C

Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services

The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

The system could not find any entries that are relevant to costing.

plz give the solution ,its urgent
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
Items in the BOM
Display BOM
Operations in the routing
Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.

hi,
iam facing the problem while creating the
stnadard cost estimate ck11n
the system prompts the following message
confirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsibleconfirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsible

The system could not determin a business area for item 00010

i m getting bellow message while entering stock (MB1C)....
No business area can be deermined for item 000010
Diagnosis : The System could not determine a business area for imte 000010. The item has plant (G001) 7 is assigned to company N001 for which a business area is required. This is caused by incomplete setting in customizing.
Procedure : Before creating the item make sure that you have completely maintened business area assignment in customizing

hi Kartik
Please check whether your company is opted for " business area financial statments" in financial account- global setting of company code. If yes and you want to continue please maintain business area for the plant and material dvision combination under the transaction cde OVF0.
Hope this will solve your problem.

Could not create the flash button because a component of Dreamweaver is missing. Please reinstall Dreamweaver.

I have Dreamweaver MX 2004 and then upgraded to
Dreamweaver Studio MX 2004 and decided to upgrade to Studio 8. At
the time I got the Studio 8 I also upgraded my computer and now my
purchased flash buttons do not work on my system. I get an error
message Macromedia Dreamweaver Could not create the flash button
because a component of Dreamweaver is missing. Please reinstall
Dreamweaver. We tried uninstall and then reinstall and still no
fix. My husband tried the software on his lap top and they work
fine. I did have Contribute installed but uninstalled it . 1. What
would the missing component be? and 2. Why didn't the reinstall
work? Thanks for the help. I need to update a couple of sites that
use the buttons and can't so far. Carol

you probably have to install the Dreamweaver update so that
you're on
version 8.0.2. just search Adobe.com for Dreamweaver update
and you
should be able to find it pretty quickly.
cpt_vom wrote:
> After a reinstall of Window XP and Drewamweaver ver.8
I'm running into a
> problem.
> When inserting a flash button I get the following
message:
> :Could not create the Flash Button because a Component
of Dreamweaver is
> missing. Please reinstall Dreamweaver:
> Not a word about which Componement missing!
> I have tried to instal Dreamweaver several times but
without result - same
> message appears.
> The button in question is 'FZ Pack 3: Multi Buttons'.
> I can insert the standard buttons with no problems and I
have also tried to
> insert this button on my second PC with succes which
could indicate a problem
> with my main PC, maybe something to do to Windows XP?
> I really would appreciate an solution to this problem
and hope somebody could
> help.
>
> Kind regards,
> Kjeld - Copenhagen - Denmark
>
>

ADF:--Error occurred during initialization of VM,Could not create the Java

Hi Friends,
when am creating new adf page and starting Run the ADF page it will through an error
*** Using port 7101 ***
"C:\Users\Rama Krishna\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;E:\oracle\product\10.2.0\db_1\bin;C:\orant\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\SSH Communications Security\SSH Secure Shell;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Process exited.
could you please tell me anybody solve this error.
Thank and Regards
Rkrao

Hi
am facing same issue, My problem was not solve
error like this
*** Using port 7101 ***
"C:\Users\Rama Krishna\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;%classpath%;.\
PATH=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;E:\oracle\product\10.2.0\db_1\bin;C:\orant\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\Oracle\Middleware\jdk160_18\bin\javac;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Xms512m -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not create the Java virtual machine.
Could not reserve enough space for object heap
Process exited.could u please tell me any body, solve this problem
Thank and Regards
Rkrao.

Why do I get error 'Could not create temporary file. No space left on device" when I use the Engine Installation Wizard in TestStand?

The process gets to the NIVISA\SETUP.INI step, then I get this error.
I've tried with installing the MDAC and not, and it happens both times.
The drive I'm trying to create the file to has 7.4GB open on it, so I'm not sure why this is happening.
Thank you,
Dave Neumann

Dave,
This is documented in the KnowledBase 2D6A63VW titled: "Error: Could Not Create Temporary File, No Space Left on Device".
As RByrd suggested, you might need to free up some memory space in your System Temp directory, OR you may change the location of your System Temp directory to one with more space (such as the directory where you want the TestStand Engine files to be saved). The Knowledbase shows how to do this step by step. This is its URL:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/46f99e55650d8d5b86256ac00059018e?OpenDocument
Regards,
Carlos Leon

Could not create the Java virtual machine What happen?

all,good day!
i use tomcat7 and JRockit JVM;
tomcat7 version info:
Server version: Apache Tomcat/7.0.27
Server built: Mar 31 2012 03:43:36
Server number: 7.0.27.0
OS Name: Linux
OS Version: 2.6.32-220.el6.x86_64
Architecture: amd64
JVM Version: 1.6.0_02-b05
JVM Vendor: BEA Systems, Inc.
JRockit JVM version info:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
in R28 jrdoc ,The -XgcPrio option is deprecated in Oracle JRockit R28. The option works in R28, but Oracle recommends that you use -Xgc instead. For more information, see -Xgc;
in -Xgc option info lists the garbage collection modes that i can specify with the -Xgc option. pausetime mode in which the option；
but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
The configuration of the JVM attributes in Tomcat in catalina.sh
export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
the error info:
[ERROR] Argument error: -Xgc:pausetime
[ERROR] pausetime is not a valid garbage collector name for -Xgc.
Valid options are: singlecon, gencon, genpar or parallel (singlepar).
[WARN ] No unit entered for pause time target, assuming ms.
Could not create the Java virtual machine.
what's wrong in my configuration ?
Edited by: 944618 on 2012-7-5 上午4:26

I would add the jvm flag -showversion next to the -Xgc:pausetime flag, so you will see which JVM you're actually running.
Also, the following part of your post is a bit inconsistent, which jvm flag are you actally using?
"but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
The configuration of the JVM attributes in Tomcat in catalina.sh
export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
the error info:
[ERROR] Argument error: -Xgc:pausetime"
The error output you posted looks like the error you would get from a R27 version of JRockit.

Could not create the Java virtual machine

Hello...
This is my jdev version 11.1.1.5.0
When I am running my project i am getting this type of error so what can i do for that
Here is that error:
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;C:\Program Files\Java\jdk1.6.0_16;.;
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;D:\app\Administrator\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.6.0_16\bin;.;;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Process exited.

Yesterday when i run that project at that time it successful compile and got output.
Today morning when i login in my PC and again i run that project once from there i am getting that massage......

Error : "Could not create the Java Virtual Machine"

Hi,
i am beginner in java. I am doing project making a small embedded linux system to run java app.
first i install JDK on my host (i686-linux 2.6.16-openSuse 10.1) and JRE on my target (i686-linux 2.4.32), both are version 1-5-. then I try to make the "Hello World!" program ,test it on the host, works fine.
then i put on my target system, but it didnt work. the error message was:
There was an error trying to initialize the HPI library
Please check your installation. Hotspot does not work correctly
when installed in the JDK 1.2 Linux Production Release, or
with any JDK 1.1.x release.
Could not create the Java virtual machine. thanks for any help and suggestion for the newbee

Maybe this older thread is of help:
http://forum.java.sun.com/thread.jspa?threadID=643395

The system could not create the msg bc of an RFC connection "NONE" error

Similar Messages

Maybe you are looking for