The System permit add line with unit price in zeros

Hello ,
I need colaboratioin in this case, i create ar invoice or ap invoice and the system permit create with lines in zeros into the documents.
Since(As,Like) controlling that it could not create documents with lines in zeros, with whole bigger than zero but one of the lines with price zero
Thanks
Ma.Cristina

Hello Thanga,
Thanks for you help, but in this case the item if has cost, the field in blanck is  Unit Price. , the option
Administration > System Initiallization > Comapny Details > Basic Initialization > Uncheck Allow Stock Release Without Item Cost
is disable.

Similar Messages

  • Trying to download orders with unit price detail

    I'd like to download orders with unit price, number of units, and line item total charge without the sales tax applied.  The itemization is in the order emails, but I seem to only be able to get a line item total including tax in an export file.  I'd have to know the unit price and do the math in order to import these orders into our Great Plains system.  That sounds like it's going to generate errors in tax withholding as prices change.
    Can I get unit price, subtotal, and tax broken out in an export file?
    Thanks
    Marty

    Hi Marty,
    Unfortunately the system is limited to what the report generator provides at this stage.  I'm afraid this would need to be a wishlist/enhancement request in this case. 
    Kind regards,
    -Sidney

  • How to conf  in Hyperion, so the system couldn't login with the same user

    Hai.....
    how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
    rgds
    uka fp

    fane_j wrote:
    Sally R. wrote:
    Someone gave me a suggestion to go to the terminal and type in the following:
    ls /Users/Shared/.*.so
    This was published on MacWorld's site, and it's not a very good tip. Try this instead
    ls -la /Users/Shared/*.so
    Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
    By bastion
    Fri Feb 24 08:49:05 PST 2012
    PeterSParker said
    Your terminal statement has an extra "." in it that prevents it from working.
    Also, you should add the options -alR to show what is happening, and to search subdirectories.
    The revised command looks like this:
    ls -alR /Users/Shared/*.so
    The above is completely wrong. The command as shown in the article is appropriate.
    The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
    Because you're explicitly searching for things that start with "." you don't need the -a flag.
    Because you only care about simple existence and not any metadata you don't need -l.
    Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

  • I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me "  check with the developer  to make sure

    I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me "  check with the developer  to make sure Keynote (for example) works with this version of Mac OS X "
    iwork was running in my computer just a few moment ago !
    Can anyone tell me what can I do? thanks

    So I re install it from the iwork's disk
    Did you repair permissions and restarted your computer after the installation?  Check SU? 

  • The document contains no posting lines with value other than zero

    Hi!
    We are having problems posting a invoice in MIRO. When entering the PO number we receive the error message "The document contains no posting lines with value other than zero".
    What could be the problem?
    /Anders

    Hi!
    The GR_BASEDIV is set in the PO. The PO is replicated from SRM where this flag has been set for no reason. Only GR and IV are set and we have implemented a note 1155266 so that Confirmation-Related IV will not be set.
    How come it is set anyway?
    Sincerely
    Anders

  • I have an iMac 17" 1.83ghz intel core from 2006. I need to reformat the hard drive. Which system do I install - the system disk in came with or can I install 10.6.8 which is what it's running now. And does the system have to be for an iMac?

    I have an iMac 17" 1.83ghz intel core from 2006. I need to reformat the hard drive. Which system do I reinstall - the system disk in came with or can I install 10.6.8 which is what it's running now. And does the system have to be for an iMac?

    Reformat usiing the original install disc then update to v10.6.8.
    Mac OS X 10.6: Reinstalling Mac OS X

  • I installed yesterday iCloud , since the performance the system  is very slow with pinwheel at every clic

    I installed iCloud yesterday, since the system is very slow, with pin wheel at every click
    What can I do?

    I would ask in the dedicated iCloud forum.  Good luck.  https://discussions.apple.com/community/icloud

  • When starting the computer I get the dong but then it stops with three loud beeps as the light in the front flashes in line with the beeps. The beeps repeat till switching off

    When starting the computer I get the dong but then it stops with three loud beeps as the light in the front flashes in line with the beeps. The beeps repeat till switching off

    Check out this Apple support article https://support.apple.com/kb/HT1547

  • Cannot download book. ..the system is already connected with an other apple id. ???

    My Mac is used from me and my wife with two different users on the System.
    Wa are also use iPhone and iPad.
    My wife purchased a ebook with the iPad in the apple store. Now she would like to read the book on the mac.
    But when she would download the book she got the messages, that the system is already connected with an other apple id.
    How can we fix this? And why connected with an other apple Id?
    Thanks for help
    Regards
    Andy

    Each device can only be authorized for one Apple ID at a time, and the authorization can only be changed once every 90 days.

  • How to verify that the system isn't infected with a virus

    Does anyone know how to check to see if your system has been infected with any type of malware? I read in an article at zdnet.com that there was a Mac OS X trojan spotted, but the article did not say how to locate whether or not you had been infected. I do not have a virus checker on my computer. Someone gave me a suggestion to go to the terminal and type in the following:
    ls /Users/Shared/.*.so
    Any comments?

    fane_j wrote:
    Sally R. wrote:
    Someone gave me a suggestion to go to the terminal and type in the following:
    ls /Users/Shared/.*.so
    This was published on MacWorld's site, and it's not a very good tip. Try this instead
    ls -la /Users/Shared/*.so
    Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
    By bastion
    Fri Feb 24 08:49:05 PST 2012
    PeterSParker said
    Your terminal statement has an extra "." in it that prevents it from working.
    Also, you should add the options -alR to show what is happening, and to search subdirectories.
    The revised command looks like this:
    ls -alR /Users/Shared/*.so
    The above is completely wrong. The command as shown in the article is appropriate.
    The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
    Because you're explicitly searching for things that start with "." you don't need the -a flag.
    Because you only care about simple existence and not any metadata you don't need -l.
    Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

  • After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error

    I have had Lion for a 2, 3 months on the iMac 27 inch purchased last October (2011). Last night I chose to update the system, and deselected iMoves update because it was 1GB, and chose only 4 updates, including iTunes, Safari (i think)... But the update says error, and ask to restart the system (it won't restart itself, so I waited 30 minutes, and then pressed the Power button for 10 seconds, to let it power down, and press Power again to power it up).
    However, after that, the system failed to boot up, showing a
    panic(cpu 0 caller .....)" "Unable to finder driver for this platform: \"ACPI\". ... xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:1504
    This is not typical of the upgrade process. So I searched the Internet forIOPlatformExpert.cpp:1504 and some people said it is a hard drive error, but then I powered down and pressed Options when booting up, and was able to boot to Windows 7 (bootcamp)... and was able to boot to the "Recovery", which let me choose
    Restore from Time Machine Backup
    Reinstall Mac OS X
    Get Help Online
    Disk Utility
    what should I do now to fix it so that it can boot again?

    This error is caused by one of the updates you applied, namely the Thunderbolt Software Update 1.2.  Many people have been affected by it, including me.  I did what Linc Davis has suggested above to fix it.  The most extensive discussion about the problem, with ways to fix the problem, is here:
    https://discussions.apple.com/thread/4020399?start=0&tstart=0

  • Can we configure the system to create order with reference ony?

    Hi,
    Do you know if we can do anything in the sales order type configuration to force the system not allow to create the sales order without reference?
    Thank you.

    Yes, You can do that. Go to define sales document type and select proper drop down in reference mandatory field. You can create with reference of sales order, quotation etc

  • Any tool to help checking the database is in line with the 2NF

    Is there any tool to help checking the database design is in line with the 2NF (second normal form), Thanks.

    Hi,
    Is this table in 2nd normal form?
    CREATE TABLE     orders
    (       order_id     NUMBER (10)     PRIMARY KEY
    ,     company          VARCHAR2 (10)     NOT NULL
    ,     customer     VARCHAR2 (30)
    );How can you tell?
    How would you expect some tool to tell?
    If you willing to even make a guess, it's only because you know what "order". "company" and "customer" probably mean in this context.
    There are queries other methods you could use to detect tables that might not be in second normal form. Fort example, you could assign a number (0-100) to each table, 0 meaning it seems to be in second normal form, 100 means that it has all the traits you expect from a table that is not in second normal form, and then list the 20 tables with the highest scores to check.
    Say exactly what you're trying to do, and someone will help you find a good way to do it. Post CREATE TABLE and INSERT statements for some tables, and expalin what traits you're looking for.

  • 0176 Security - The system has been tampered with

    So the machine is a T40. It hasnt had any passwords for atleast the 2 years ive had it. The main battery has been bad and the cmos battery died recently (id assume the bad main battery helped it along).
    After replacing the cmos battery (tested it with v-meter and it shows 3.23v) Im getting this error message. When I click ok to goto setup it asks for a password. But when I hit enter it lets me in without any problems. Its also never done this before the cmos battery died. 
    Under security it says lock bios setting disabled. Power on and hard disk 1 also disabled. 
    I thought to try to reset to defaults but when i press f9 it doesnt work. No idea if that key is broken, ive never used it. 
    Bios info 3.21 (1RETDPWW)
    Embedded version 3.04
    Anybody have any ideas what to try? I know toshiba had a similar problem with some of there models but they included a cmos reset jumper pad on there motherboards to reset bios defaults. 
    Ive seen thinkpads with all 0's on the UUID before when the boards were going but this one has a correct number in it. 
    Anybody have any ideas on what I can do? Its a older machine so motherboard isnt really worth doing. 
    Solved!
    Go to Solution.

    Your T40 has a Supervisor password on it, that's why you can't reset defaults etc.
    Dying of CMOS battery has brought that issue up, hence the error message.
    Use it as-is, not much you can do short of swapping the motherboard.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Amount Due With Order prices as zero iStore Order Detail page.

    Hi All ,
       I am using Oracle Ebs R12.0.6 and have enabled OM System parameter  Enable Recurring Charges to yes .So we are showing
       Amount Due With Order Prices in Order Detail page of iStore. Can some body please explain what exactly these price will show. will it show same
       price as One Time Price , Order Total and Subtotal as in Order Management . How can show the correct Amount due with order prices , is there any settings.
      I have enable IBE : Recurring Charges Profile set to yes and IBE : Enable Pay now set to as specified in  iStore R12 Shopping Cart and Order Review shows Subtotal and Total Due as zero (Doc ID 733523.1) .But Still
      the prices are showing as zero .
    Thanks
    Mark

    Post Author: Guy
    CA Forum: General
    Hi,
    If I understand you correctly, you could simply use a crosstab at the begginning of your report to summarize all customers.  If you put it alone in its section you'll be able to specify that you want a page break after.
    The remaining of the report should be a simple report where you group on your customer and the detail line showing a sale.
    finally, if I was wrong above and you still need subreports, you can use a shared variable (or a parameter) to allow the main report to receive the total from the subreport.
    Good luck!

Maybe you are looking for