The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe

After installing version 5.1.1 of the Flexmotion driver, and installing f5 update, I got the following message after rebooting the system: The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe. OS is Win NT. I see device in MAX , but can not initialise it, and cannot make firmware update.
I do not se device from NT system menager.

The instructions on the f5 update are not 100% explicit about what to do for NT. The NatMotion.sys file should not be replaced on NT systems, only on the specifically listed OSes. Uninstall and reinstall the 5.1.1 driver along with the f5 update, however only install the components that do not specifically mention a particular OS.
Regards,
Brent R.
Applications Engineer
National Instruments

Similar Messages

The system could not locate the EDI partner agreements

Hello all,
I am trying to setup the DESADV message in SAP, but I am having some problems.
1. I've created the LAVA output relationship via VV21 with that customer
2. I've created the relationship in WE20
2.1 Under the KU partner type, I've created the outbound parameters: SP -DESADV and SP -SHPMNT
2.2 In MESSAGE CONTROL option, I've added Application V2, Message type LAVA and Process code SD05 or SD11 depending on the message
But, when I try to add the LAVA message to the outbound's delivery header, I get an error message that says:
"The system could not locate the EDI partner agreements (outbound) for
partner 2.
You cannot use transmission medium 'EDI' with this partner."
Any help with this issue? thank you

Hi,
Just have few checks at your end as below:
1. go to WE20
2. select you customer
3. select outbound parameters
4. click on details {blue lens below}
5. in outbound options tab -- have you maintained the receiving port ? also in basic type - have you maintained the mesage type?
6. in message control tab - have you maintained appropriate entries ?
7. finally very much important check > hope you have not activated the TEST check box in the initial partner profile>outbound parameters>partner functions field...
Hrishi

Can't open the illustration. Can't finish previewing. Could not complete the requested operation.

Recently, I restarted my MAC and I'm not able to place images in AI or open AI files with images.
Sometimes when I do place a jpg, it just shows a box.
Some errors include:
• This file is not readable.
• Can't open the illustration.
• Can't finish previewing. Could not complete the requested operation.

As Monika said, we need info about the file and exact system info. Sounds like the files are damaged or locked at the operating system level, which in turn could indicate file system issues....
Mylenium

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document"

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document". Can someone please help me fix this? It's never done this before until now...

First go to the editor preferences>general and click this button, then restart the editor and try again. If that doesn't do it, more info, like your version of PSE and your operating system:

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

When I try to use the refine edge command I get this message could not complete the refine edge comm

when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Need Help! "Could not locate the resource file in the Configuration folder."

I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
~Todd

Nadia,
Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
First I downloaded both Cleaning scripts. For CS4 & CS3.
Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result.

"Could not locate the Resources file in the Configuration folder"

While opening DW cs5 on my iMac OS X 10.7.5 a window came up that says: "Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application."
After downloading and reinstalling Adobe Creative Suite CS5 yesterday per the instruction of Adobe tech support, the application still had the same message when I attempt to open it. Not sure where else to turn. Please advise. Thanks

See if this previous thread regarding the same issue will help:
http://forums.adobe.com/message/2274699#2274699
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

My used postpaid moto g was accidentally activated on verizon while I was trying to activate it on the tracfone boyp program. The phone was activated on tracfone but I could not dial the number *22890 to finish the activation. The setup wizard on the mot

My used postpaid moto g was accidentally activated on verizon while I was trying to activate it on the tracfone boyp program. The phone was activated on tracfone but I could not dial the number *22890 to finish the activation. The setup wizard on the moto g will only let you activate the phone on verizon. Had tracfone cs rep on my landline phone and was waiting for verizon rep on the moto g. Waited 20 minutes but verizon rep never answered.
How and where do I get help from verizon to deactivate the account and release my meid number. Also how do I bypass the setup wizard so that I can activate my phone on TRACFONE? Thank you.

There's no other way to track it other than Find My iPhone. All you can do is wait to see if it ever goes back online. The serial number will only help to identify it as yours if it is ever found, and the IMEI number would only allow your carrier to blacklist the phone so it couldn't be reactivated on their network, if the carrier offers this service.

TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Resolve iOS update and restore errors

HT1766 i am trying to unlock the iphone 4, after backup, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb availabl

i am trying to unlock the iphone 4, aftermanual backup on the computer, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb available

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Installer could not locate the data it needed... Entourage 2008

Hi, I'm a bit of newbie to Mac's... I am trying to work out why a copy of Entourage 2008 I have wont install... I have posted on the Mactopia forums but with no success, so I thought I would try here, as I am not sure if it is an Entourage/Microsoft issue or a Mac OS issue. Every time I try to install my downloaded e2008.iso (came with my Exchange server rental) I get the following error: "Install Failed. The installer could not locate the data it needed to install the software. Check your install media or internet connection and try again or contact the software manufacturer for assistance". I am assured that the download I have is complete and 'verified'. When I double click the .iso file, it mounts and then opens - i then click through 'Office Installer_mpkg / contents / distribution.dist to begin the install. If anyone has any advice on what I might be doing wrong I would appreciate it! Thanks.

Thanks - it is reputable (should be...) as it is from the company i get my exchange server rental through, part of the 'package' is a download of entourage or outlook. Unfortunately they do not offer very good mac support... Have gone back to them to make it their problem! thanks all the same.

Could not locate the service

hi - I am hoping that someone can help with this.
I have a new server (2008R2SP1) and Installed SQL 2008R2 SP3 Database and Management tools only.
All looks like it has installed correctly, however when I try to stop the SQL service from the SQL Server Management Studio I get the Error "Could not locate the Service".
I can stop the services correctly from both the Services.msc and the SQL Server Configuration Manager.
I can see that the SQL Server Management Studio uses the command
"C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\ControlService.exe" -computer <SERVERNAME> -service MSSQLSERVER -stop
So if I run that command from an elevated Command Prompt I get the same result "Could not locate the Service".
I have tried reinstalling but to no avail.
does anyone have experience with this issue?
Many thanks,
Alan
Regards, Alan

Hi,
There is no need to start SQL Server service from SSMS. Please do it as you are doing from SQL server configuration manager.
Are you logged into physical machine or taking remote of SQL Server make sure
1. You log into machine on which SQL Server is installed as admin
2. Right click on SSMS and select run as administrator and then try restarting.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

"Could not locate the bean with the ejb-name XYZ in weblogic-ejb-jar.xml

Hi,
Please someone help me on this...
I'm trying to deploy an application on WLS 8.1 SP4
on HPUX IA64 arch. From the ear file WLS is able to
deploy 3 jars but for the last two jars it's throwing
the below error:
Could not locate the bean with the ejb-name xyz in weblogic-ejb-jar.xml
But ejb with name xyz is defined in the the weblogic-ejb-jar.xml file and it's also present in the
META-INF/ejb-jar.xml file.
I have no clue what's going wrong.
Any help is appreciated.
Thanks
Mouli

oops! Pls ignore my previous mail. It was for a different problem.
FOr the original problem of "couldn ot locate the bean with the ejb-name XZY in weblogic-ejb-jar.xml":
This happens if you don't have the below files defined
for a JAR/EAR file:
weblogic-ejb-jar.xml and weblogic-cmp-rdbms-jar.xml (needed if you have any Datasource mapped)
These two are basic files required for any JAR/EAR file.
If you dont' have it already you can generate them using
$WLS_HOME/bin/startWLBuilder.sh GUI tool bundled along
with WLS (I used 8.1 SP4) to generate these files ! This tool is really helpful.
- Mouli

The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe

Similar Messages

Maybe you are looking for