The system settings do not allow any changes ???

This is the message that I get when I want to add data to a freshly created table, using the menu (in se11): Utilities -> Table Contents -> create Entries.
Have installed the Netweaver 2004s (ABAP) trial version.
Is it a customisation problem or is it because it's a trial version ?

Thank's for your relies.
T000, field CCCORACTIV has the value 2.
With SCC4 on client 000 I was able to change the permission.
Now adding entries to my table is possible.
manny thanks, Harald.

Similar Messages

Error: The system settings do not allow any changes

Hi experts !!,
I had installed SAP NetWeaver 2004s Sneak Preview-ABAP
I am able to create database table using tcode: SE11
but I get an error when I tried to create table entries
Error:
The system settings do not allow any changes
Message no M0421
Diagnosis
The system settings (SE06 and SCC4) are such that you cannot make any changes to this table in this client
Kindly help me to fix this issue !!
Thanks,
Prembabu R

Hi,
I had modified Changes and Transports for Client-Specific Objects
-> Automatic recording of changes (Option-selected)
Now I am able to add new entries to tables.
Thanks for providing valuable information...
~Prembabu

System settings does not allow changes to be made to object

Hi,
In one of my test system, when i tried to change the object its displaying following error message.
System settings does not allow changes to made to the object.
I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
I would like to know, how to change the object in the namespace.
Regards
Srikanth

Hi,
In SE06, in addtion to system status and component status, check the namespace status too.
It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
Regards,
Srikishan

HT3180 I tried again later several times and am afraid the rental period will expire and will not be able to watch the movie. The system also does not allow me to re-purchase the movie.

I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/

Likely network related
What is your current connection, use speedtest
Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
If on wifi try Ethernet
Make sure DNS is set to automatic (settings - general - network)

HT5622 Same ID for iPhone an iPad, changed on the phone but will not allow/reflect change on iPad. How do I Chang so I can update?

Has anyone made this work?

It might help to log out and back in with your Apple ID:
1. Go to the Settings app.
2. Scroll down and tap iTunes & App Store.
3. Tap your Apple ID at the top.
4. Tap View Apple ID.
5. Tap Sign Out.
6. Sign back in again with your new info and it should work.
Arthur

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

I am trying to ask a question about iPhones, but it will not let me post - I get a message similar to this - you are not allowed to change the content. Any help on this matter?

I am trying to ask the following question: Just updated my iPhone5 to V 7.1.2 and can no longer print to my MFC 7860W from this phone. I researched this issue on this forum and found answers from last October/November..... Wary of downloading anything that was posted that long ago. Wondering if there is anyway around this issue, with more recent information? I was able to use this printer in the past by using Brother's iPrint App.
Thanks!!
But when I hit post, I get an error message at the top - "you are not allowed to change this content" Can anyone help me?

I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry

Purchase organization filled PR not allow to change desired vendor in PO

Hello All,
i am facing a issue.
if you set a "Desired Vendor" in the PR, this can be copied as default value in the PO Vendor field when dragging & dropping the PR item in the Shopping Cart icon of transasction ME21N.
if purchase organization is empty in PR with desired vendor,   we can modify the vendor in the PO.
if Purchase organization filled in PR with desired vendor, we could n't able to modify the vendor in PO... its appearing grey unable to edit the vendor.
here my question is   whats is the relation purchase organization not allowing to change the desired vendor in po.
what are the configuration related to this issue.
Actually   we want to modify desired vendor in PO irrespective of the the purchase org filled or empty in PR .
Please explain in details with an example
Thanks and regards,
Sathiya

Hi
vedor must assigned to P.Org...
Check once that You are copying existing PR to a PO (having fixed vendor in PR)?
And also check PO doc type settings whether vendor field is mentioned as optional/required.
Regards,

System Settings will not save my desired mouse scroll direction

I understand the Apple genius of wanting the Settings: Mouse: Scroll direction: Natural box to be checked. But **** it, this is MY iMac and I want the scroll direction to remain Unchecked, so the screen scrolls in the direction I’ve been used to for YEARS.
The problem is the System Settings will not save the unchecked scroll box. I have to return to the System Settings every time I log on to UN check the Scroll Direction: Natural box.
Will Apple ever fix this so that I, and others, can operate the scrolling as THEIR LONG-TIME USER sees fit?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

After creation of PO system should not allow to change the price in PO

Hi There,
In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
So please advice.

Hi,
you could set in customizing for field selection keys the net price
to display for ME22N so that changes can not be made
(transaction OLME -> purchase order -> Define Screen Layout at Document Level).
Please check that you have set all the relevant field selection
groups to display: AKTV, ME22, ME22N... (read and apply note 30316)
Other workaround is try to do by yourself with the badi
ME_PROCESS_PO_CUST and send your own error message.
Regards,
Edit

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

Any method not allow to change PO price after do the GR

hi,
Any method not allow to change PO price after GR had done. Thanks

Hi jo jo,
To disallow any price changes, set the Tolerance Key limits for Price Variance (PE-Price Var in Purchasing) for PO in IMG to Zero. This will compare the new price (Effective Price w/ Cash Disc) to the material price in the Material Master. Also set the msg no. 207 (in App Area 06) as a "E"-error message. This will stop end users from making changes.
If the Tolerance limits are set to zero and the message 207 is set as E, it should work.
Let me know if this was helpful.

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

In Sales Order Users are not allowed to change price for any material

Dear all,
Please give me the solution :
In Sales Order va02 Users are not allowed to change price for any material .

Hi Amit
If you want that in VA01 manual as well as other pricing condiion entry and cahnges to be allowed and only in va02 users should be restricted ,then you have following alternative.
Go to T.Code SHD0
Select Transaction VA02.
Create a new variant ,give suitable name.
select option change with processing.
So u can run a va02 transaction and for every screen u can create screen variant and control data entry whether required , dispaly or hide.
in this for LV69a pricing screen disable update button .
so system wont change anything updated or cahnged in pricing.
further you can create the variant transactions from this transaction variant and assign to different users as per control requirements.
I think this will help you
Regards
mandar

The system settings do not allow any changes ???

Similar Messages

Maybe you are looking for