The system shall allow for reporting by rejection reason code

Allow the reporting of a reason code when an order is rejected for the purpose of tracking lost sales
The system shall allow for reporting by rejection reason code to allow for tracking lost sales.

A custom ABAP will have to be developed looking at table VBAK and VBAP to determine the reason for rejection, then group it by order number.

Similar Messages

Where is the System queued windows error reporting?

Hi Guys,
I would like to increase the free disk usage to more than 15% on the mailbox server Drive C. After check and discuss, we are to achieve this goal that move the system queued windows error reporting to other place. However, i can't find this file after
read the relevant documents and can't find this file in Drive C. Could you help me found path of this file? it's urgent. i will waiting at online.
note: Our boss is not allow to delete this file. i am so sorry.

Hi,
You can check the Windows Error Reporting Service queue in the paths below:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
C:\Users\Username\AppData\Local\Microsoft\Windows\WER\ReportQueue (For Users)
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Susie,
This is Daniel.
I note that This file take 18.2GB through view disk clear up, but these all folder just take 800M, I would like to they are not in their proper place.
but I would like to thanks for you help.

Milestone billing, the system only allows pricing types D, G and K

Hi,
I would like to use pricing type as C Copy manual pricing elements and redetermine the others for Mile stone billing item catagory.(VTFA copy control setup)
While changing pricing type from G to C in copy control VTFA - ITEM LEVEL, i am getting this beow warning message.
Milestone billing, the system only allows pricing types D, G and K
Could you tell what is impact of this warning message?
Best Regards,
Chandramohan

Read OSS Note 102961 - New pricing type for milestone billing plans.
It looks it used to be error message, until version 4.5A.
This is just to make sure that the cost conditions are adjusted to the billing percentage rate. By keeping value K you can achieve this.
Regards,

My system doesn not much the current uploaded software it shows on start up disk that i have mac os 1.8 where the system is asking for 1.77

my system doesn not much the current uploaded software it shows on start up disk that i have mac os 1.8 where the system is asking for 1.77. It doesn't allowe me to reinstal or access the drive>

I assume you don't have a backup on an external HD. You always should, because then you could easily fix your problem.
Boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
 Cheers, Tom

Are the system requirements for running an 8.2 application the same as that for running the development software?

I built a fairly simple application using 8.2 Developer's Suite and targeted Windows 2000. When I attempted to install the application on a Windows 2000 machine, I received an error stating that the machine did not meet the minimum requirements. It has enough hard drive space and is running Windows 2000, so the only items not conforming would be processor speed or RAM. Does the target machine have the same requirements as the development machine (8.2)? Is there a method of determining what the system requirements are for a particular build of an application?
Thanks for any assistance.
Marty G

The development was done on a Windows 2000 machine and the app runs fine on it. The target machine was verified to be running at only 200 MHz with 64 MB RAM. While this meets the Windows 2000 minimums, it appears the 8.2 Run Time or App requirements are higher. I knew the app would be slow - we are trying to reuse assets. My real concern is determining the actual minimums for the application prior to installation. I have been poking around in 8.2, but have not as yet found a way to determine this. We will likely have to acquire a different machine, and I need to ensure that it will run the application.
Thanks

I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postco

I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postcode. What can i do to complete the payment and get photoshop!

As far as I know, your registered location and your credit card information must match... but,
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Should FTP on the system be ENABLED for SFTP Adapter to work from BPEL Code

Hi,
I am trying to SFTP files from server1 to server2. I am getting the below fault message,
faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Unable to read response. Unable to read response. Unable to read response from host: earth.as.local Please make sure that the ftp server settings are correct and that the ftp server is up. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary> ,detail=<detail>Read timed out</detail> ,code=<code>null</code>}
I have configured FTP Adapter JNDI name and other details correctly,
hostname, username, password, usesftp(true),port(22).
On the server2, the FTP was disabled and was getting the aforesaid error.
But when we enabled FTP on server2, the SFTP started working fine with the same configurations of JNDI.
So, to conclude, Should FTP on the system be ENABLED for SFTP Adapter to work from SOA BPEL Code?
Please give your valuable comments and suggestions.
Thanks & Regards,
Nagaraj Ganapa

Yes, if you are trying to write a file using SFTP/FTP to any machine, a SFTP/FTP server should be running on that machine and there should be a process listening on the correct port(22/21). This is true for any other application as well and not just for Oracle BPEL. You can not send a file to a server using SFTP/FTP when the FTP/SFTP process is not running on that server.

RC0: RS Installation Problem - The credentials you provided for Reporting Services service are invalid. To continue ...

Hi
When installing 2008 RC0 I get the following error message:
"The credentials you provided for Reporting Services service are invalid. To continue, provide a valid account and password for the Reporting Services service.
Error code: 0x84B40000"
During the installation process it never prompted for the credentials to be used for the Reporting Services service (i.e. the Reporting Services service did not appear under the "Service Accounts" tab during the Server Configuration stage of the installation. The other services did appear). In the "Ready to Install" stage the Account under Reporting Services, Service Configuration is given as "udefined". Everything else installed without a problem.
Any help would be appreciated.
Thanks.
Egmont

I had a same and similar issue.
I finish the installation by providing SQL Agnt and SQL Service by NT AUTHORITY\NETWORK SERVICE and blank password. Once complete the installation I changed the Service Account by services.msc to SQL SA account.
Reason: Service account is not granted for Log on as Service.
Solution: Grant the SA to Log on as Service.
Abu
Bad Idea When you first install Microsoft SQL Server to run under a Microsoft Windows NT account, SQL Server sets for that Windows NT account various Windows user rights and permissions on certain files, folders, and registry keys. If you later change the startup
account for SQL Server (the MSSQLServer service) and the SQL Server Agent service by using SQL Server Enterprise Manager (SEM) or SQL Server Configuration Manager (SSCM), SEM automatically assigns all the required permissions and Windows user rights to the
new startup account for you so that you do not have to do anything else. We recommend that you use this is the approach to change the service account.
http://support.microsoft.com/kb/283811

Does the iOS app allow for digital signatures ?

does the iOS app allow for digital signatures ?

Hi,
Currently, Adobe Reader mobile products (for iOS, Android, Windows Phone) do not support digital signatures. But you can add handwritten signatures (as annotations) to PDF documents.
For digital signatures for legally binding documents and contracts, I'd recommend the desktop version of Adobe Reader or Acrobat Pro/Standard. Alternatively, you can use Adobe EchoSign for e-signatures.
About Certificate signatures | Digital signatures
Electronic Signature Software, Digital Signatures | Adobe EchoSign

HT4557 Does an iOS device such as an iPad count as one of the five devices allowed for home sharing.

Does an iOS device such as an iPad count as one of the five devices allowed for home sharing?

This page says :
Home Sharing in iTunes is designed to let you easily share your iTunes media libraries between up to five computers in your household. You can also use Home Sharing to play your iTunes content on your iOS devices and Apple TV (2nd generation) if they are connected to your home Wi-Fi network.

How to stop the system to ask for a password

How to make the system from asking for a password for every installation???

You can't do that. Apple is very careful to make sure that only an authorized person does installations.

Cannot download trial version. This always appear "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.

Cannot download trial version. This always appears "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.

Hello,
in this case please have a look here where you can compare it with your equipment : System requirements | After Effects.
Good luck!
Hans-Günter

Increase the system stats retention for 1 year on production

Hello Basis All,
I need to extend the collection of Stats period for 1 year on production.
When i use the st03n, it gets me for three months.
we are using 4.7 on oracle database. What are the changes i need to make with or without disturbing the system.
Appreciate for any quick responce.
Thanks all,

Hi Sridhar,
Go to St03n
Under Expert Mode
Collector and perfomance DB -> Workload Colletor -> Collector and Reorg.
here you can manage the retention of St03.
Hope this could help you.

Does the Student License Allow for Two Installs?

Does the Student License Allow for Two Installs?
I have a desktop iMac and a Macbook notebook. I just purchased Adobe Web Standard CS3 (student license).
Can I install and activate the package on both of my computers? I know I could do this with a regular license, but I was unsure about the student license.
Thanks in advance.
Dave

HEEEEEELPPPPPPPPPP, PLEASE
I purchased adobe cs3 primium but i already had photoshop installed. I installed cs3 primium and now i keep getting the error that the licensing has stopped working can't use file cont IT or cust. support. I tried to download the clean file and it gives me the same error to open this file. i tried to uninstall with control panel programs and uninstall and it gives me the error uninstall not complete. I tried to repair with disc and uninstall with the disc and nothing is working. I have windows vista with 100g hd 500 mem duo core all the proper requirements but i can't get this to work.'
HELP anyone

HT4623 I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what c

I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what can I do to reactivate the device ?

You cannot reactivate the device without knowing the previous owner's information. This is the new antitheft measure built into the iPhone.
There's nothing you can do. You'll need to purchase a new phone.

The system shall allow for reporting by rejection reason code

Similar Messages

Maybe you are looking for