The system time is val seconds older than the queue space time

We did a time change on our system to future time and getting the above error after we are trying to reboot the application with current time.
Please help !

The Tuxedo queueing subsystem access to an accurate system time in order to
implement message expiration times and other time-related features. If the
system time is reset to an earlier value, time related queueing features can
work incorrectly. For this reason,
Q_CAT:2238 is logged if such a situation is encountered. Timestamps can be
stored within individual /Q messages as well as in the queuespace
superblock.
If the time change into the future was of short duration, the easiest way to
resolve this problem is simply to wait until the real time reaches the
previously set future time. Once this happens, the queuespace will once
again be usable.
If the queuespace is used on a test system and the data on it is not
valuable, another option is to recreate the queue space from scratch.
Another option is to reset the system time back to the previous future time
in order to use the queuespace.
If this is a production system and you are a BEA support customer, you can
file a support case about this situation. It may be possible for support to
write a utility program to modify the timestamps within the queue to earlier
values or to give you a version of /Q compiled to accept an environment
variable that can be used to modify /Q's idea of the system time.
Ed
<hunki> wrote in message news:[email protected]..
We did a time change on our system to future time and getting the above
error after we are trying to reboot the application with current time.
Please help !

Similar Messages

I have an ATV 1 which is connected to my Bose Lifestyle System. I just expanded the system and connected a second AMP for the expansion. Can I connect the ATV 1 to the aux jacks (RCA Cables) of the expansion amp? Thanks

I have an ATV 1 which is connected to my Bose Lifestyle System. I just expanded the system outdoors using a second Bose System Amp. Does anyone know if I'm able to connect my ATV 1 to the Bose expansion module in addition to keeping it connected to my main Lifestyle System using RCA cables? The new amp has RCA input jacks for auxiliary inputs. Thank you.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Compiled file is older than the Autosequence sourcefile

Our lab is converting it's computer operating systems from Windows 2K to Windows XP. I have installed XP on a test mule and am able to use Diadem under my own profile. The problem I'll detail below arises when another lab user logs in under another user ID when an autosequence is selected.
The error is:
The compiled file that has been created is older than the Autosequence sourcefile. Please check your computer clock!
There is nothing wrong with the computers clock.
Appreciate your assistance.
SW

Wait! For not a not
Hi SW
Ahhh.. I'm assuming you are using AUT and NOT VBS files. I'm also assuming that the AUT files are located on a different computer (server?). If that is the case, and the server clock is slightly ahead of your local computer clock DIAdem gets worried. The AUT get precompiled into an AUC file, DIAdem checks the data of the AUC file version the computer clock if it greater then the time/date on the local computer clock, you've exposed a singlarity in the universe!
To fix this delete the AUC files on the server and run the application again.
If this doesn't work let me know
Tom

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

Drivers, BIOS, and software on Lenovo site older than the enclosed

How come the drivers/BIOS/software listed on consumersupport.lenovo.com (for my G560) is older than the one I received on its D partition? E.g. BIOS is 2.08, whereas my laptop has 2.10 installed. The laptop was allegedly made in November 2010.

i suggest you not to update any drivers/bios if it's not necessary.
for bios issue, we've heard similar issue with ideapad systems. nevermind if you don't have any issue.

I purchased an episode but it is only showing 30 seconds rather than the full 42 minutes. How do I get it to play the full episode as I can't seem to download it again?

I downloaded a tv epsiode, but it doesn't show the entire 42 minutes. All I get is a clip of 30 seconds, rather than the entire 42 minute episode. I have tried to download the episode again, but it wont allow me to and I have also tried to download the series, but if I do that it wont deliver the epsiode that I already have suposedly downloaded. Anyone have any idea how to help?
Thanks,

Hi JAM147,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

The activity procedure date must be larger than the system date in VA42

Please Help me...... I am trying to update the Contract End Date in VA42 but it is not updating and through an error message
''The activity procedure date must be larger than the system date''
please help me to solve the issue....
Thanks & Regards
Shakeel

Shakeel Ahmed Mohammed
Please update how you solved so that it will be helpful to others who face similar issue.
G. Lakshmipathi

Update Date is older than the Creation Date

Hi Team,
In the Oracle Application 11i forms we are seeing the Update Date is older than the Creation Date?
But the creation date should be older then the updated date.
Thanks,

What 11i release are you on?
Can you please elaborate more on the Creation/Update dates mentioned above? Are you referring to forms or tables or specific rows? Is this happening to all data/forms? Please provide an example for us to understand your issue.
Thanks,
Hussein

Windows drivers from retail Snow Leopard install DVD older than the computer

I'm trying to install Windows 7 64-bit on my mid-2010 Core i7 MBP (running 10.6.8) via Boot Camp. Since I am experiencing the "Windows support software is not available" bug when I try to download the drivers etc., it looks like I will have to install the drivers from an OS X install DVD, but I don't have access to the OEM disc that came with the computer.
I do have a retail Snow Leopard DVD that I got to upgrade my old Macbook right when Snow Leopard came out; will this disc (which predates the computer by about one year) have the drivers I need to get the hardware to work with Windows? My concern is that since the disc is older than the computer, the disc may not have the drivers needed for the newer hardware.
Another issue/possible solution: I had planned to upgrade to Lion as soon as this Boot Camp situation is straightened out; would there be a way to get around this issue by upgrading OS X first and then setting up Boot Camp?

Any OS X DVD from 10.6 or later is fine, as we never tire of saying....
Yes, sortof to upgrade OS X first, or leave as is and install Lion on an external drive (you can clone 10.6 only first with CCC to do that). Then clone back is one idea.

Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support

Hi, I got a big problem. I restored my mac and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my CD, and I don't have an ID with lion purchased

Hi, I got a big problem. I restored my macbook pro and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my installing CD, and I don't have an ID with lion purchased, so what should I do? Do you sell the system software?

This is a user forum; we're not  Apple.
Please contact the Apple Support folks directly for issues related to hardware and software purchases.
The particular model of MacBook Pro is a key detail here, as the Mac model will determine the oldest version it can boot, as well as whether it'll boot more current software.
AFAIK there is and was no Lion installer DVD available. It was a download. AFAIK, the last DVDs commonly available were for Snow Leopard 10.6. Snow Leopard DVDs are still available in the Apple online store in various countries, if your MacBook Pro is old enough to be able to boot that version.
If your MacBook Pro purchase with Lion wasn't registered with Apple, then you'll have to discuss this directly with the Apple Support folks, or repurchase Lion from the Mac App Store (which will usually involve a call to Apple for a redemption code as it's old software), or you'll "purchase" (it's free) Mavericks OS X 10.9 and wipe and install that assuming your MacBook Pro supports Mavericks. If you didn't purchase the MacBook Pro from Apple (and it was shipped with an older release), then you'll end up acquiring a redemption code from Apple for Lion, or installing Mavericks.
For completeness and given you're probably already aware of this, the usual approach for restoration with recent OS X versions is via the recovery boot (more details). If the disk is wiped and you can't get Lion, then you'll probably end up reinstalling with Target Disk Mode using another Mac with a compatible FireWire or Thunderbolt port and a cable. Or visit the local Apple Store.
sputniki: Once OS X 10.7 or 10.9 has been reinstalled, yes, getting Time Machine configured and going is undoubtedly on the agenda. But had there been a viable backup here, I expect jianghua would have used it.

Error Message FF747 -The tax amount must not be greater than the tax base

Hello,
We are attempting to post an import vendor invoice through transaction FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
We tried putting a very high percentage in the tax code also but it didn't help
We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
Best Regards
Amit Kulkarni

Hello
This may be a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like this to be posted along with the expense item

I want to know if the Macbook Pro with the ash key board and as the cd rom infront is more recent than the one with the black key board and as the cd rom on the side.

I want to know if the Macbook Pro with the ash key board and as the cd rom infront is more recent than the one with the black key board and as the cd rom on the side.

Hi Tracy,
I'm guessing "ash" is the silver colored keyboard, the same color as the rest of the MBP? If so, that machine, with the optical drive slot on the front, is the older machine.

When I restart Firefox, my pinned tabs open to the page that I last viewed rather than the page that I originally pinned. For example, if I pinned to a local ne

When I restart Firefox, my pinned tabs open to the last webpage that I viewed rather than the page that I originally pinned. For example, if I pinned to a local newspaper's website, navigate to espn while on the pinned tab and then close Firefox, the next time I open Firefox, the pinned tab goes to espn rather than the local newspaper's site.
Additionally, the same thing happens if I am reading an article on the pinned tab. When reopening Firefox, the pinned tab goes to the last article viewed.

Hi don.w,
That is just the way that pinned tabs are designed. They are meant to be left on the page you want them left on e.g. a web mail account.
If you want to pin a newspaper then I would pin the front page and then open any article you want to read in a new tab.
Having said that there is an addon called [https://addons.mozilla.org/en-US/firefox/addon/tab-utilities/ Tab-utilities] which contains an option to automatically revert a pinned tab to the original URL.
I hope that helps.
--Edward

How do i make the whole veiw of the computer smaller? it seems bigger than the whole screen

how do i make the whole veiw of the computer smaller? it seems bigger than the whole screen

often, this happens when you blunder into Accessibility/ Universal Access features, such as screen Zooming.
System Preferences > Accessibility/ Universal Access > Seeing

The system time is val seconds older than the queue space time

Similar Messages

Maybe you are looking for