The table in which the Calculated key figure properties are stored ?

Hi experts,
Can any of you pls let me know the table which the stores the property like 'Before Aggregation' for CKF. I want to find all the queries which contain CKF with before Aggregation property ?
Kindly help
Regards
Ashwin

Ashwin,
Am not sure whether there is any table can store this kind of information, but you can have a look in the followiing tables:
RSZELTDIR - Directory of the reporting component elements
RSZELTTXT - Texts of reporting component elements
RSZELTXREF - Directory of query element references
RSRREPDIR - Directory of all reports (Query GENUNIID)
RSZCOMPDIR - Directory of reporting components
RSZRANGE - Selection specification for an element
RSZSELECT - Selection properties of an element
RSZELTDIR - Directory of the reporting component elements
RSZCOMPIC - Assignment reuseable component <-> InfoCube
RSZELTPRIO - Priorities with element collisions
RSZELTPROP - Element properties (settings)
RSZELTATTR - Attribute selection per dimension element
RSZCALC - Definition of a formula element
RSZCEL - Query Designer: Directory of Cells
RSZGLOBV - Global Variables in Reporting
Hope it might help you..
Assign Points if it helps
Regards,
Gattu

Similar Messages

Tables in which Read mode and Cache settings are stored for Bex

Hi BI Experts,
We have a requirement for which we need to know the tables in which the read and cache modes are stored(locally and globally) when we change them in the query properties(In T code RSRT) of a query
Thanks in advance
Regards,
M
Edited by: madhu marupudi on Feb 5, 2009 5:30 PM

Hi,
Check in the following tables, these are related to Reports tables.
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT Selection properties of an element
RSZELTDIR Directory of the reporting component elements
RSZCOMPIC Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV Global Variables in Reporting
Thanks
Reddy

Using the function SUM() in a calculated Key Figure

Hi All,
I need to create a calculated Key Figure and am looking for the function SUM().Can you please let me know where this is present.I have checked under the "Data Functions" and it does not seem to be present there.
Thanks
Aravind Pattabiraman

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Problems in using a calculated key figure in the Clustering Model

We have a problem in using a calculated key figure in the clustering model. With the limitation of the standard, in the Field tab, each calculated key figure cannot be selected from the selection screen directly. According to the SAP help, we have to use a dummy infoobject for a calculated key figure.
Are there any other ways to use a calculated key figure without using a dummy infoojbect?

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Currency Translation for Calculated Key figures

Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.

Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k

Calculated Key Figures question

Hi
In a Purchase Order report I have included a Calculated Key Figures and this report is transported to the QA environment.
Then I create another report using the same Calculated Key Figures but when I tried to save the query it gives me an error;
"The query could not be saved due to a problem in transport"
"BEx transport request 'BD1K900664' is not suitable or not available".
I was told that when the 1st report uses that Calculated Key Figures and the report transported over to the QA I cannot reuse the same Calculated Key Figures in the new report. Is this true in SAP BI? If so how can I reuse the same Calculated Key Figures in a new report.

Hello Lai,
Once you have transported the earlier report along with the original calculated key figure, create one more request by selecting just the cal. key figure which you want to use.
dont release this request.
Now any change you make in the cal. key figure will be stored in this newly created request.
also go ahead and create a new query using this ckf and save it in the newly created request.
Then you can always release this and transport the same.
hope this helps..
let me know for any further issues...
thanks,

Currency translation problem for calculated key figure

Hi All
I have a problem with the currency translation for a calculated key figure.
I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
The query has selection on the 0calmonth.
But in the result the I am getting unexpected results.
Do we have any inconsistencies in the currency translation on the formulas?
Please help me on this.
Regards
S.R

Hi All
I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
I think I have some problem with the currency translation variable.
Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
exch rate type : M
Time reference : 0CALMONTH
End of month
Target currency for a variable : < var created on 0currency>
For my report, i need calendar month selection, currency selection.
Please help me with your ideas.
Thank you
Regards
S.R

Diff between Calculated key figure and new formula 6extra functions why

Hi Friends
In BEx query designer we have Restricted key figure & Calculated key figure. In the case of Ristricted Key figure And new selection the difference is Global and local.
But if we come to Calculated Key figure and New Formula the difference is same global and local. But in New formula we have 6 extra function. My question is does is there any certain reason for this or SAP AG not be able to develop those functions
Thganks & Regards
Bramhanand

Hi Surendra thank you for your reply.
But i am not asking difference between calculated key figure and New formula.
What i am asking is in the case of Restricted Key figure And new selection the difference is Global and local.
But in Calculated Key figure and New Formula the difference is same global and local and in New formula we have 6 extra function. My question is does is there any certain reason for this.Why not SAP AG is not included the new formula functions in Calculated key figure.
Thanks & Regards
Bramhanand

Calculated key figures are returning the word "ERROR"

Hi All,
the calculated key figures which i used in one query are displaying the word "ERROR" at the end of the results as part of each cells formatting.But when i copied the same query to my system then its not showing the word error and even i created one more query which is a replica of the first one and then also iam not getting the error .
what might be the cause of this issue . kindly suggest me how to control the word error in the out put
regards,
jayakrishna

Hi,
you can control the way BW displays exceptions with customizing (SPRO) transaction RSCUSTV4.
identify differences of these settings in your systems and apply them accordingly.
hope this helps...
Olivier.

Which calculation should not be done in calculated key figures

Which calculation should not be done in calculated key figures?

You can be more specific.
CKF are defined to do the reporting on Key figures which are not existing in Infoprovider.Ideally all the calauculations are to be defined as CKF(Global)/Formula(Local)
Wel,you may have to do few things in conditions like...finding TOP 10 Customers etc..
hope this helps you
Sriman

Can we give the more than 2 decimals for key figure

Hi,
can we give the more than 2 decimals for key figure while entering the manuall planning.
Ex:There is keyfigure called 0DEBIT which is having values as 1000.00 USD, 137688.00 USD.which are displaying bydefault whenever we entered the values while planing or File.
what Customer is asking us 0DEBIT keyfigure values should be display 1000.0000 USD, 137688.0000 USD. ( added two more decimals for keyfigure value).
Can we maintained decimals more than two.........?
Thanks,
Ven
Edited by: vanarasi venkat on Apr 13, 2009 4:35 AM

Hi,
Though you can specify the no of decimal places for each keyfigure in the 2nd screen of layout builder but say if you have entered scaling factor as 1 and decimal places as 4 and user enters value as 15.2546, then in the cube it will be stored as 15.25 because physically the keyfigure can store values only upto two decimal places, so it will round up the figure to two decimal places. But, if you specify the scaling factor as 2 and decimal places as 4 than value 15.2546 will be stored in the cube as 1525.46.
If above explanation doesn't help you i finding out the solution for your requirement than you have to either change the number of decimal places in the keyfigure or tell user that technically it's not possible in BPS.
Regards,
Deepti

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load wit

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

The macro attempted to modify a key figure that is not locked

Hi
In my planning area I choosen detailed lock, keyfigure specific lock and do not lock read only keyfig after that In interactive DP, I have 2 Planning Books A and B .when I load the selection for book A itu2019s loaded well because all are editable key fig but when I load book B I get error u201CThe macro attempted to modify a key figure that is not lockedu201D in this book 3are editable keyfig 3 are display. I am in SAP SCM 7.0,I had seen the SAP NOTE 851731but its too old i think now iam in advanced that that but that note is not there in my system .
Any ideas on why this is happening?
Regards
siva
Edited by: sivaram2411 on Feb 3, 2012 1:52 PM

Hello,
According to your setting in the palnning area ("do not lock read-only key figures"), if you have set a key figure as "Output Only" in /sapapo/mc8b or by a default macro, then this key figure could not get locked.
It is not allowed to make changes to unlocked key figures. So if there's a macro that tries to update this key figure, you'll get the error message.
If you have "do not lock read-only key figures" set, you must make sure that your macros do not make changes to those key figures that are output only (read only).
Best Regards,
Ada

Need the the underlying table names which the Material Plan Detail Search p

Our supply planning users would like to obtain the demand and supply plan for a bunch of given parts by running a query against some tables. The data they need via a PS Query output in Excel format is the same data that is provided by the Material Plan Detail page in PeopleSoft Supply Planning (Menu Path: Supply Planning >>>Solve Plan>>>> Material >>>>>>Material Plan Detail). The main underlying table behind this page is PS_PL_MRP_DTL.
The problem is that this table contains data for only one Part Number (INV_ITEM_ID). The data is populated when Item ID is selected on the Material Plan Detail Search page.
What are the underlying table names which the Material Plan Detail Search page brings together to present the information for the selected part number on the target page (The Material Plan Detail page)?
If you could tell us the underlying table names (which the Material Plan Detail Search page brings together) we can write a query to present the data to the users for multiple part numbers at a time and not just one part number at a time.
Any help would be greatly appreciated.
We are on FSCM 8.9 Bundle 13
Thanks in advance.

The ERD's for FSCM 8.9 are available from following link
PeopleSoft Enterprise Financial Management 8.9 Entity Relationship Diagrams [ID 979359.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=979359.1
Hope it contains the info you are looking for.
Hakan

You used to be able to shuffle a playlist and see the order in which the songs would sync into your iPod. I haven't been able to figure that out. Can anyone help me?

You used to be able to shuffle a playlist and see the order in which the songs would sync into your iPod. I haven't been able to figure that out. Can anyone help me?

With your playlist in "List view", click on the header over the column of numbers all the way to the left. This will then reveal the true playback (and sync) order.
However, the sort order in iTunes may not agree with the sort order on your device, but that is a separate issue and seems to have too many variables to go into here.

The table in which the Calculated key figure properties are stored ?

Similar Messages

Maybe you are looking for