The tablet didn't accept country and language selection
when I start with my tablet , i have faced to problems:
1- it didnt accept the language and country selection in the ID agreement page. when i select it goes back to none selected
2- the divice is over heated at the back
During the initial setup of the BlackBerry PlayBook tablet setup, the user is prompted to select a country for the BlackBerry ID agreement. When a country is selected the following error is displayed:
Unable to display the BlackBerry ID Agreement. Please select your country and language, then try again.
If attempting to connect the BlackBerry PlayBook to a Wi-Fi Hotspot, the username and password must be entered to obtain internet connectivity.
When the BlackBerry PlayBook tablet has successfully connected to a Wi-Fi HotSpot, the following Hotspot Setup button appears at the bottom left:
Click on the Hotspot Setup button, and this will open a window to enter the username and password.
For additional information on Wi-Fi setup, please refer to the following knowlage base article:
KB26228 - Getting started with BlackBerry PlayBook tablet initial setup
KB26096 - Troubleshooting Wi-Fi and networking on the BlackBerry PlayBook tablet
The BlackBerry PlayBook tablet is running an unsupported software version. Update the BlackBerry Tablet OS using BlackBerry Desktop Manager 6.0.2, only if the BlackBerry PlayBook tablet is running
It might take up to tree hours to update the tablet software. During that time, the BlackBerry PlayBook tablet should not be disconnected from the computer.
1. Confirm the BlackBerry PlayBook tablet is running only 1.0.1.1309
a. When a succesful Wi-Fi connection is establish, click on the Diagnostic gear icon on the bottom right.
b. In the Diagnostics screen, select Device Information under Information Type
c. Confirm the SCM Version is 1.0.1.1309
d. If it is 1.0.1.1309, proceed to Step 2. Do not continue if it is not version 1.0.1.1309.
2. Connect the BlackBerry PlayBook tablet to a computer running BlackBerry Desktop Manager 6.0.2.
3. On the home screen of the BlackBerry Desktop Software, click Update.
To download an update, click Get Update.
To view other available versions of the BlackBerry Ptablet OS, click View other versions. If applicable, click another version. Click Install.
4. Select the Email me when new versions are available check box to receive an email when an updated version of BlackBerry Tablet OS is available.
5. Click Install update.
When a confirmation message that the update is complete is displayed, disconnect the BlackBerry PlayBook Tablet.
A reset of the BlackBerry PlayBook tablet may be required to get the reload to begin.
hope this help!
Similar Messages
-
Hello. I have a problem with my Photoshop Elements 12 programm. I had restart my computer and I wanted to instal my Photoshop Elements 12 again but the sytem didn't accept my serial number. I get no answer per Mail and I didn't reach someone on my phone. Can you help me please? Thanks a lot Nana
1) Apps are not part of the backup, only data stored by 3rd party apps. But you can redownload the apps for free again if you use the same account you did when you bought them the first time. http://support.apple.com/kb/HT2519
2) See this article http://support.apple.com/kb/HT1766 and find out what's in your backup.
3) Backup your itunes+ library (http://support.apple.com/kb/HT1382 and http://support.apple.com/kb/HT1751), which will copy your Mobile Applications folder, and save your iphone backup folder as well
In other words, maintaining a backup of your computer is essential.
When you resync your apps from your computer to the phone, make sure your computer is authorized again. http://support.apple.com/kb/HT1420 -
MSN (home page) redirects to the wrong country and language
Hello,
I have a strange problem. I went to Mexico for vacation. While I was there, every time I open my IE, it would redirect me to the Mexican MSN. I assumed, this is normal for MSN redirects to the local (country and language) page. It redirected me to
http://prodigy.msn.com/es-mx/?ocid=iehp page.
Now, I am back home to US. For some reason, MSN is still Mexican. I have an option to change it when I click on the Options in the right top corner of the MSN page, but it does not remember this setting when I close and open my IE.
My Language and Country in Control Panel are correct. Home page in IE did not change and it is
http://go.microsoft.com/fwlink/p/?LinkId=255141 If I go to this link directly, it takes me to the US MSN page.
Not sure what else to check. Anyone can help me with this?
Thank you.
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you.have an option to change it when I click on the Options in the right top corner of the MSN page, but it does not remember this setting when I close and open my IE.
So, this sounds like more of an MSN issue than an IE one. But perhaps you should try clearing Cookies at least for that site. You can do that with the Developer Tools, Network tab. (F12, Ctrl-4) Clear Cookies for this domain is the button
that looks like a cookie with a bite out of it. Unfortunately there is no keyboard shortcut for that option.
Good luck
Robert Aldwinckle -
Problem with set-up: Blackberry ID- country and language
Hello, I am setting up my Playbook tablet for the first time and have hit a snag on the third or fourth screen. I am supposed to enter my country and language for Blackberry ID, but I see only 'No country indicated' and I find no way to enter a country and language, as prompted. According to the tutorial, this screen should show a language option immediately. I went to get a Blackberry ID, through my e-mail address but it is obviously not 'connected' in any way (yet) to my Playbook tablet.
I hope someone might help me with this and I will certainly appreciate said help! Must say the obvious, I am new to this forum, but I am sure I am posting my question in the right forum.
Thanks a lot!
Solved!
Go to Solution.No worries, It could have been that you lost connection. Doing this will make sure that you are connected. Sometimes you may need to delete the connection and try setting up again and then going further will display what you are looking for.
Regards,
Nick
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
Get Locale country and language codes
I have checked the documentation, but nothing is jumping out
at me. Is there a function that returns the locale country and
language codes? GetLocale() returns the "locale name as it is
represented in ColdFusion":
ie:
English (US)
Spanish (Standard)
What I am looking for is the
ISO
codes
en US
es ES
I can get the information using getPageContext(), but just
wondered if I was overlooking a built-in CF function.-==cfSearching==- wrote:
> The problem with the functions I have seen is that they
return
locale name
> as it is represented in ColdFusion (ie English (US)
). But what I am
> looking for the ISO language and country codes.
...hmm this didn't go thru on the 16th. let me try again.
that should only be for the "traditional" cf supported
locales (backwards
compatibility is always foremost in the cf team's minds), the
rest should be in
normal java style locale ID (th_TH, ar_AE, etc).
no, there's nothing built-in in cf for what you want. you'll
have to dip down
into java:
<cfscript>
localeObj=createObject("java","java.util.Locale");
locales=localeObj.getAvailableLocales();
writeOutput("<table border='1'>");
writeOutput("<tr align='center'><td
colspan='2'>Locale</td><td>Language</td><td>Country</td></tr>");
for (i=1; i LTE arrayLen(locales);i=i+1) {
thisLocale=locales
thisLanguage=thisLocale.getLanguage();
thisCountry=thisLocale.getCountry();
writeOutput("<td>#thisLocale.toString()#</td><td>#thisLocale.getDisplayName()#</td><td>#t hisLanguage#</td><td>#thisCountry#</td></tr>");
writeOutput("</table>");
</cfscript>
note that this snippet doesn't show variants (eg. th_TH_TH)
& shows language
only locales (en, fr, etc.), nor is it sorted in any order i
can recognize. also
keep in mind that what this shows depends on the server's JRE
version. if you
want a "better" source of locales, use the icu4j lib's
ULocale class. it's based
on the latest CLDR & contains way more locales (and they
actually tend to fix
locale bugs in your lifetime). -
I want to know that if the Director could present different country's language.
My system is simplified Chinese and Director is English. I
want to know that if the Director could present different country's
language. In my work, I inserted other country's language text in
the Director Cast, but it can't right display the text.(exemple
Thai, Korean, Spaish) Can you tall me that? Thanks~The warranty for ipod nano in india is here:
http://www.apple.com/legal/warranty/products/nios-ipod-english-uk.html
Im not really sure but some resellers have their own warranty.
If the iPod is brand new, it should have the apple one year limited warranty
hope it helps -
Hi , my iphone app store is downloading apps in french instead of portuguese . I checked my country and language in settings and they are right . Don't know what to do anymore. I even bought some apps and they are also in french .
Follow this link for the Bionic ICS user guide; if you have issues/questions, you may want to do a search on this forum as there are already several threads/remedies. If a search doesn't answer your question, submit a post.
https://community.verizonwireless.com/message/893011#893011 -
Need help. App store won't accept my wal-mart pre pay debit. I owe $8.48. There's $300 on card. When I check card statement it says apple ear marked $8.48.....yet the store won't accept card and says there's a billing issue???? Confused.
Hello milkisoo,
Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused.
As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment. However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear. This is the case for your one charge of $1,051.69.
It also sounds like an error may have occurred when you initially attempted to place your order, resulting in one of your gift cards not registering properly and the order not being completed. Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
Thank you for posting.
Alex|Social Media Specialist | Best Buy® Corporate
Private Message -
ISA : Dateformat depending on Country and language
Hi there...
I have installed ISA for R/3 and setup several shops for different conutries with corresponding languages.
When I log on to the different shops I get different date formats like 21-04-2005 and 21.04.2005 etc.
Where is this managed ?
First I thought that is was depending on my SAP connecting user but then it couldnt be different from shop to shop.
I have searched tough the language resources and other places to find a solution but without any luck.
Can anybody tell me the solution ?
Best regards
Lars Henrik AndersenHi,
you have to go for a user exit.
USEREXIT_SAVE_DOCUMENT_PREPARE. write the logic with the user name=A should check the customer country and region if it is allowe d then the sales order can be created else give a error message
regards
Prashanth -
"More" tabe and language selection missing from Inspector
I need to define languages for different cells.
The help document indicates this is done as in Pages -- selecting the text, choosing the Text tab from the Inspector, selecting the "More" sub-tab, and selecting the appropriate language from the menu.
However, there isn't a "More" sub-tab on the Text tab of the inspector in Numbers.
Has anyone located this function someplace else? I've searched and searched and not turned it up so far.
Apple, if the function isn't there, can you add it in an update??The place to ask Apple for an enhancement is in the Numbers menu using "Provide Numbers Feedback". The forums are made up of users like yourself, not Apple personnel.
As far as I know, there is no way to choose multiple languages in Numbers, it uses your International (Language & Text) preferences. -
I want to use my ipad in a public library.
How can I re start a browser session with safari? I need to do this to use wifi in the library. After accepting terms and conditions it ask me to restart all the browser sessions. But with Ipad it doesnt seem to close totally the application.
Please, help!Try a force quit, I don't know if it closes the sessions but it's worth a try...
When in the app, press on the sleep/wake button until the shutdown screen appears, then press the home button until the app quits. -
IMessage on Mac: country and region code?
Hi,
The Message app in Mac OS it's not working correctly, and I think it's because of the country and region code.
I can't send messages to the contact phone number (previously added to Contacts app) as I do on the iPhone, it says the number is not registered with iMessage. I have to manually type 5511 (my country and region code) before the phone number. I do not need to do this on the iPhone, all local phones have no code at all and are in the format ####-####.
Everything else works fine, the messages are even synced in both devices, but as the Mac OS app sees the sender's number with country and region code, it does not match any of my contacts in the Contacts app.
Is there any preference I need to set or any other way to resolve this?
Thanks!HI,
Actually they are two different apps and the approaches are slightly different.
The iOS version can check if the recipient is also iMessages compatible and will switch to SMS if Not.
This means there are extra steps before iMessages are sent to the iMessages server for delivery.
The Mac version can tell you the recipient is not using iMessages but does not switch to SMS meaning the action is Local to the device and not at Server level.
As far as I can tell the iMessages server works on storing full international Numbers as an ID which is then linked to an Apple ID.
Obviously the numbers can vary in the number of digits with some countries only having one leading + digit (i.e America is +1) and others have longer (i.e. the UK is +44 and Brazil is +55)
In the UK different carriers are separated in the next four digits a bit like an area code.
I must admit that sometimes I select an Name and the choice for an iPhone Number in the Contacts part of adding a name to the "To" field and it tells me it does not like the number.
Clicking and holding the red box at the pointed arrow end shows me the alternatives and I can uses the same number in an acceptable format.
Part of this is what is "registered" as the number with the iMessages server compared to other places
What people registered and what you have in your Contacts info may be the same but I would think the iMessages servers are expecting a minimum number of digits.
9:02 PM Saturday; January 5, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Updating country and regional maps with Nokia Suit...
Hi Folks
I am an E72 owner and a frequent user of Nokia Maps. Hence I use Nokia Suite to keep the map data up to date, time to time.
I normally download all countries by right-clicking the ALL item and choosing 'download all'. I thought I could download all available maps this way. But when all downloads are finished, I still can see some regional maps are NOT downloaded as the 'download' button is available for the regions.
Initially, I thought the regional maps of a country were NOT necessary if their country map has been downloaded simply because the country map should cover its all regions (comparing the map size of a country and its regions, and the regional maps were not automatically downloaded by default)
But it seems not that ture, at least for the latest map data v0.1.29.100.
As shown in the attached screenshot, for some countries, e.g.China, France, India, Italy, Spain and USA, some regional maps were automatically downloaded though most regional maps remain undownloaded (the 'download' button is available).
Why? Only those regional maps have been updated?
Do I really need to download ALL regional maps to keep all data up to date?
FYI
Model: E72-1
Type: RM-530
Software Version: 091.004
Software Version Date: 02-Jun-2012
Custom Version: 091.004.C00.01
Nokia Maps v3.04 10wk32 b04 MW OpenGL L MN
Map version 0.1.29.100
Nokia Suite 3.7.22
Any comments please?
Regards,
bbao
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.
Attachments:
Scr000078.jpg 44 KB
Nokia_Suite.Maps_1.jpg 150 KB
Nokia_Suite.Maps_2.jpg 156 KBbbao wrote:
Thanks so much for effort farby and scoobyman.
It is interesting that the World Maps of scoobyman's E52 does not show any regional maps of China. The regional map of Heilongjiang will not appear in scoobyman's Nokia Suite, as there is no triangle symbol before 'China' indicating no regional maps for China at all. That definitely looks like the same thing that I saw on my E72 before updating to 00.01.29.100 map data.
First, scoobyman 's post has created confusion as he has not checked the same way as OP has done. He has checked selecting Maps and Voice Guidance on Phone at the bottom and not by selecting All under Maps at the top. If you see both attachments posted by me you can see the difference how they are displayed.
bbao wrote:
Yes, farby's India map with Nokia 5800xm seems having totally different map data. e.g. India map: 532 MB vs 372 MB, and Delhi map: 51 MB vs 33.7 MB.
BTW, it notice that you both are using a new version of Nokia Suite 3.8.13 Beta. Not sure if it could make any difference.
Whether Maps version is same or different is not the point. Even if the Maps version is different in both the cases it is being displayed the SAME way as OP ..only difference being the sizes of the data files ... -
In-app purchase is charged, but the goods didn't download.
I bought the bundle in DJMAX RAY for$9.99, but the goods didn't show up and I click it again,it says in-app purchase is already paid, but it hasn't been downloaded.
how to solve this problemhttp://support.apple.com/kb/HT1933
-
The password saved for a site is correct but the site still doesnot accept it and I have to type it in each time. How do I fix this?
== This happened ==
Not sure how often
== always"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies
Check that you have only saved one name and password from that web server.
See: Tools > Page Info > Security
You can check that site here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
Maybe you are looking for
-
Error messages when trying to install Essbase 11.1.1.3 on Red Hat Linux 5.3
Hello, I'm having an error message while trying to install EPM 11.1.1.3 on Red Hat Linux 5.3 (32-bit). It happens when I click "Next" for the installation to begin: Error: Linux File Service Initialization Failed. Turn on the System property 'EnableL
-
<u></u>what is rfc. and uses
-
I cannot hear my phone ring....I have the volume full throttle and the vibrate is off. I cannot hear the ringtone. Is there anything I can do. My only other thought is that it might be the case. It is comparable to an OTTERBOX.
-
FrontRow won't display playlists
In iTunes I have two folders that contains playlists. One has normal plalists and the other has smart playlist. In Front Row I can only see the playlists in the second folder (the smart one) the other folder does show up but instead of showing playli
-
I have an application that connects to an Access database. I can connect and search the database with no problems. My problem arises when I try to add a record to the database. When I run the code, there are no exceptions and the code completes succe