The tabs on Mozilla ux are barely visible(the top half is only shown). How to fix this?
I have already tried restarting the browser without ad-dons. The problem occurred after last nights update.
This is in Firefox 25 -- also known as "Nightly"? I'm very unfamiliar with UI changes that might be in that version...
Could you test in a new Firefox profile? In addition to bypassing current add-ons and custom settings, it should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager as described in [[Use the Profile Manager to create and remove Firefox profiles]]. To switch back to your default profile, you also would exit Firefox and return to this dialog.
To avoid data loss, I recommend using the default location suggested (not any folder with existing files), and not deleting any profiles without making backups first.
Does the tab bar look normal in the new profile?
Similar Messages
-
I imported a jpg file that the system covers up with purple overlay except for a small portion of the top. Sometimes I can see the whole photo. What's causing this and how can I get rid of the problem. Importing it again does not help.
Restore as new and if ok add your back up ,however that may contain what ever has corrupted the iOS
I have occasionally fixed a similar issue by simply resetting the iPhone -
Strange System Font in Dreamweaver. After I installed Dreamweaver CS4 on my Mac, it loaded this strange font as seen in the photo attached. Anyone know how to fix this? I have uninstalled/reinstalled many times to no avail. There are no other problems with w/ other CS4 programs, they all have the normal system font. I can't figure it out. Thanks!
Funny fonts issue in PI etc.,
http://kb2.adobe.com/cps/405/kb405153.html
Fonts in Dreamweaver panels display incorrectly
http://kb2.adobe.com/cps/138/tn_13862.html
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap -
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?
http://discussions.apple.com/thread/3418045?tstart=60
-
I am using a T61 ThinkPad with an external hard drive and my itunes library keeps disapearing but remains on the external drive. Any idea how to fix this so my music doesn't disapear all the time? It's a real drag pulling music back into iTunes each week
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!
Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!
-
my iphone 4 is only charging while off and everytime i try to reset it it still does the same thing does anyone know how to fix this ? ive tried resetting 5 times already , ive tired different plugs and usbs , nothings working
You will need to contact the app developer if your having problems with a 3rd paty app. See if they have a support forum.
-
just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks
Hi Apple_Mom,
Thanks for visiting Apple Support Communities.
If you've noticed issues after updating to iOS 7.0.2, you may want to first update to iOS 7.0.3 which was recently released.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If the behavior persists, the troubleshooting steps in this article can help:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Jeremy -
When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?
-
my ipod touch 4th generation, is stuck on the apple turn-on screen where you turn it on, but all you see is the apple. Any ideas on how to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Not sure how to fix this, but it's extremely annoying. Anyone having this same problem?
Close All Open Apps... Sign Out of your account and try the Reset again.
If no joy... Connect to iTunes on the computer you usually Sync with and Restore...
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
I can browse through tumblr just fine, but whenever I go to the login page it said:
Secure Connection Failed. An error occurred during a connection to www.tumblr.com. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
I understand that tumblr has certification errors but that never happened to me before I until I upgraded to Firefox 26.0. I like FF and I don't want to use any other browser.
How to fix this?Does it help if you either disable SSL3 or disable TLS as a test?
security.tls.version.min = 1 and security.tls.version.max = 1 disables SSL3 and enables TLS 1.0
security.tls.version.max = 0 and security.tls.version.max = 0 enables SSL3 and disables TLS 1.0
Type <b>about:config</b> in the location (address) bar and press the <i>Enter</i> key to open the <i>about:config</i> page like you open a website by typing the URL in the location bar.
*If you see a warning message then you can confirm that you want to access the about:config page.
*http://kb.mozillazine.org/about:config
See:
*http://kb.mozillazine.org/security.tls.version.*
0 means SSL 3.0, 1 means TLS 1.0, 2 means TLS 1.1, etc.
You can try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
If that didn't help then remove or rename secmod.db (secmod.db.old) as well. -
Could not be moved to the mailbox (null) alert - anyone know how to fix this?
Greetings
When I archive mails in one of my mail accounts, about 50% of the time, I'll get an alert that says - "The message XYZ could not be moved to the mailbox (null) - The destination mailbox does not exist."
Anyone know how to fix this?
Thanks,
JohnCan't Delete Mail Messages
-
my iphone 4 has just started to play up !! when i go to switch the silent button on nothing **** up on the screen, nor does the volume button do this either. Also i never hear a text when i get it or hear it ringing, but i can play my ipod no probs. I have been into settings and sounds to see if it was off but it wasnt and all the tones and things work on there just not when i get a call or text. I have reset all settings and updated it all and nothing is working !! anybody any ideas how to fix this please
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to resolve many fact tables and Dimensions tables
Hi, The scenario is we have many facts and dimension tables. Based on some conditions one measure from one fact will be divided by another fact measure. I have encoutered with many errors like " Unable to navigate .... " ? How to resolve these errors
-
Loading multiple images dynamically
hi, trying to load several images to timeline keyframes, managed to load one, how to load several, Here´s the code: var imageLoader:Loader; function loadImage(url:String):void { imageLoader = new Loader(); imageLoader.load(new URLRequest(url)); image
-
Hover effect without it actually being a link?
I have some text that displays more text when you click on it, and FAQ script. To help users know that it will do something I wanted to make it act like the other links on my page that bold when you mouse over them. I achieved this by putting a # for
-
Problem managing keys/certificates with SunPKCS11
Hi: I am trying to create a small applet to manage certificates stored on a smart card using SunPKCS11. I can successfully import a key/certificate from a P12 file, however I have some problems managing keys and certificates that appears to be relate
-
Regarding Form development in apps
Hi, I developed one custom form in oracle apps, i inserted data into table , but i am not able to see from front end. If am i entered data trough from front end then i am able to see the data. Thanks&Regards, Hanimi