The target "GetTargetPath" does not exist

Hi the following error occurs when i build a solution containing my VSPackage project and a windowsApplication.
Error 1 The target "GetTargetPath" does not exist in the project. MyLibrary18.mlproj WindowsApplication1
Please help
Thanks
kajal

Hi,
I solved it myself.
in the custom project file the following line is required to compile the project and have referenced too as a project reference:-
 <Import Project="$(MSBuildBinPath)\Microsoft.Common.targets" />
Thanks
Kajal

Similar Messages

  • Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

    Hi to all,
    I tried to compile my .sln with VS2010 but I had this error.
    error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
    It occurs only compiling with win32 configuration but not with x64 one.
    Ideas?
    Thank you in advanced

    In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
    If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
    Visual Studio 2012 Compatibility
    Visual Studio 2013 Compatibility
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why do I get the error "The target GatherAllFilesToPublish does not exist"?

    I have recently installed the new Azure development tools for Visual Studio 2010 service pack 1. Every time that I try to publish an existing website (using file system deployment) I get the following error:
    The target "GatherAllFilesToPublish" does not exist in the project.
    Can anyone tell me what I am missing?
    Thanks

    Followed the suggestion from Yuri without success, 
     then I found the tag at end of config file as shown bellow to
    <TargetName="MvcBuildViews"AfterTargets="AfterBuild"Condition="'$(MvcBuildViews)'=='true'">
    and I changed to
    <TargetName="GatherAllFilesToPublish"AfterTargets="AfterBuild"Condition="'$(MvcBuildViews)'=='true'">
    so, it started deploying to file system as before I install the Azure SDK 2.2.
    Bjunio

  • Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

    I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
    Thanks,
    Paul
    spid24s     Error: 28005, Severity: 16, State: 2
    spid24s     An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
    or you do not have permission.

    Hi Paul,
    I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
    So when his AD account got deleted, the database had NULL as owner
    Using the following query I asked for the owners of the databases:
    select name, suser_sname(sid) from master.dbo.sysdatabases
    So changing the owner of the databases that had a NULL owner solved the issue for me.
    use <databasesname>
    go
    exec sp_changedbowner 'sa'
    Thanks for triggering the solution.
    Peter

  • Target 'install' does not exist in this project ",this is the error i get..

    i get this error when i try to install ,with the command : ant install,
    a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • The kind infoobject does not exist in the CMS

    hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
    the kind infoobject does not exist in the CMS
    the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
    then i found some error explanation
    Cause
    The InfoObject type does not exist in the CMS
    Action
    Ensure that the InfoObject type is propertly installed.
    and
    Cause
    An InfoObject type is missing.
    Action
    Ensure that the XSD for this type of InfoObject is installed.
    I want to know how to reinstall the infoObject type.
    or any other idear on this.
    thanks all.
    Ada

    WHat's the exact version of the source and the target BO system?
    Regards,
    Sratos

  • Ora-12545 connect failed because target host does not exist(plsql develper)

    Hi,
    I am using Oracle 10g version, and i am using plsql developer.
    I am able to connect Oracle through sql*plus, But i am not able to connect Oracle through plsql developer from past few days, it is giving me error like:
    ora-12545 connect failed because target host does not exist
    I have not done any changes in setting though i am getting this problem, earlier i was able to work with plsql developer very good.
    I am sending the TNS file for your reference.
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = vnod-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    Please help me in this.
    Thanks,
    Vinod

    910575 wrote:
    Hi,
    I am using Oracle 10g version, and i am using plsql developer.There are numerous products with similar names.
    Which vendor provides your software & which version of the software do you have?
    Is the Oracle database server system installed on the same system as your client software?
    post results from following SQL
    SELECT * FROM V$VERSION;
    Handle:     910575
    Email:     [email protected]
    Status Level:     Newbie
    Registered:     Jan 26, 2012
    Total Posts:     42
    Total Questions:     20 (18 unresolved)
    Why so many unanswered questions?
    Edited by: sb92075 on May 18, 2012 9:30 PM

  • 30:6519:Target application does not exist.

    Hello,
    I want to delete an existing application, but I'm getting the following error "Target application does not exist" and I can't delete neither deploy.
    Do you know what I can do to resolve this issue?
    Regards,
    Rodrigo

    Hello Tod,
    I'm talking about EPMA, version 11.1.1.3.
    I can see the application in EAS and in the Planning Database.
    In the log I'm get the following errors:
    java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale pt_PT
    java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale pt_PT
    java.lang.Exception: APP_NONE_SELECTED
         at HspLogOn.Handle(Unknown Source)
         at HspLogOn.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    As aditional information this happened after I migrate the application artifcats.
    Your help is much appreciated. I don't know what to do.
    Regards,
    Rodrigo

  • Target 'install' does not exist in this project (TOmcat)

    i get this error when i try to install a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!
    Message was edited by:
    TheBeginner_77

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • Caught ::EKdException in module call: The attribute SAPNotes does not exist.

    Hi,
    I am installing NW7.4, usage PI, and during the "define parameters" phase, while checking connection to the database, I get the following pop up error:
    Caught ::EKdException in module call: The attribute <SAPNotes> does not exist..
    I checked sapinst log for more meaningful entries and found the following:
    ERROR 2014-03-19 15:33:32.656
    FKD-00024  Unknown attribute SAPNotes in table tMSS_ServerParameters.
    Any ideas? OS is Windows 7, and DB is MSSQL 2012 (installed using SAP vb script provided) - pre-requisites checks were executed and I got OK's all around, including for the Windows 7 OS.
    Thanks,
    Marco

    Hello, same thing with system installtion NW 7.30 OS=2008R2 DB=SQLSERVER200R2
    see trace..
    TRACE      2014-03-25 11:17:47.819
    Copying SQL scripts from X:\nw730_installation\swpm\COMMON\INSTALL\MSS\SQL to  target...
    ERROR      2014-03-25 11:17:47.893 [kdxxcrow.hpp:112]
               lib=iakdblib
    FKD-00024  Unknown attribute SAPNotes in table tMSS_ServerParameters.
    TRACE      2014-03-25 11:17:47.898 [jsextension.hpp:141]
               JSExceptionHandler::setJSException()
    Member function 'Installer.setKdbClient()' has thrown ::EKdException. Converting to JavaScript exception EJS::EKdException.
    TRACE      2014-03-25 11:17:47.898
    Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException but already set to modlib.jslib.caughtException
    TRACE      2014-03-25 11:17:47.941 [iaxxgenimp.cpp:649]
                CGuiEngineImp::showMessageBox
    Caught ::EKdException in module call: The attribute <SAPNotes> does not exist..
    ...end of trace
    with SWPM=SWPM10SP04_8-20009707.SAR
    it works finde.
    Winfried

  • The name "Folder" does not exist in the namespace

     I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
    I am using Visual studio 2013. As I work through the example I am getting the following error. 
    Error 1
    The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
    c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
    11 17
    FolderExplorer
    Error 2
    The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
    c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
    16 7
    FolderExplorer
    Here is the code:
    <Window x:Class="MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
            xmlns:my="clr-namespace:FolderExplorer"
        Title="Folder Explorer" Height="350" Width="525">
        <Window.Resources>
            <ObjectDataProvider x:Key="RootFolderDataProvider" >
                <ObjectDataProvider.ObjectInstance>
                    <my:Folder FullPath="C:\"/>
                </ObjectDataProvider.ObjectInstance>
            </ObjectDataProvider>
            <HierarchicalDataTemplate 
       DataType    = "{x:Type my:Folder}"
                ItemsSource = "{Binding Path=SubFolders}">
                <TextBlock Text="{Binding Path=Name}" />
            </HierarchicalDataTemplate>
        </Window.Resources>
    I have a class file named Folder.vb with this code. 
    Public Class Folder
        Private _folder As DirectoryInfo
        Private _subFolders As ObservableCollection(Of Folder)
        Private _files As ObservableCollection(Of FileInfo)
        Public Sub New()
            Me.FullPath = "c:\"
        End Sub 'New
        Public ReadOnly Property Name() As String
            Get
                Return Me._folder.Name
            End Get
        End Property
        Public Property FullPath() As String
            Get
                Return Me._folder.FullName
            End Get
            Set(value As String)
                If Directory.Exists(value) Then
                    Me._folder = New DirectoryInfo(value)
                Else
                    Throw New ArgumentException("must exist", "fullPath")
                End If
            End Set
        End Property
        ReadOnly Property Files() As ObservableCollection(Of FileInfo)
            Get
                If Me._files Is Nothing Then
                    Me._files = New ObservableCollection(Of FileInfo)
                    Dim fi As FileInfo() = Me._folder.GetFiles()
                    Dim i As Integer
                    For i = 0 To fi.Length - 1
                        Me._files.Add(fi(i))
                    Next i
                End If
                Return Me._files
            End Get
        End Property
        ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
            Get
                If Me._subFolders Is Nothing Then
                    Try
                        Me._subFolders = New ObservableCollection(Of Folder)
                        Dim di As DirectoryInfo() = Me._folder.GetDirectories()
                        Dim i As Integer
                        For i = 0 To di.Length - 1
                            Dim newFolder As New Folder()
                            newFolder.FullPath = di(i).FullName
                            Me._subFolders.Add(newFolder)
                        Next i
                    Catch ex As Exception
                        System.Diagnostics.Trace.WriteLine(ex.Message)
                    End Try
                End If
                Return Me._subFolders
            End Get
        End Property
    End Class
    Can someone explain what is happening. 
    Thanks Hal

    Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
    in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
    xmlns:my="clr-namespace:FolderExplorer"
    The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
    If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

  • Bursting Problem - A file or directory in the path name does not exist

    I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
    [042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
    at java.io.FileOutputStream.open(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
    at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
    at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
    at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
    at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
    at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
    at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
    at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
    at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
    at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
    at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
    at PIreportburst.bEngine(PIreportburst.java:24)
    at PIreportburst.main(PIreportburst.java:51)
    -Below is the java code I'm using
    public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
    try {
    DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
    dp.process();
    catch (Exception e) {
    System.out.println(e);
    }

    Thanks Ike
    Where do you suggest setting the temp directory:
    DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
    or in the xdo.cfg:
    <property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
    ..and thanks for the link to the BIPublisherIDE
    Cheers, Mike

  • JDODataStoreException: The instance null does not exist in the data store

    I'm unable to figure out how this exception occurs.
    I have a class IDCounter which has a number of fields such as
    'm_Name' (String)
    'm_AccountName' (String)
    'm_UserName' (String)
    'm_Description' (String)
    'm_CreationDate' (Date)
    'm_LastModifiedDate' (Date)
    'm_DeletedDate' (Date)
    'm_Count' (long)
    The filter I'm using is "m_AccountName == \"test\" && m_UserName
    ==\"test\" && m_DeletedDate == null"
    The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
    t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
    t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
    t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
    t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
    Exception Trace:
    javax.jdo.JDODataStoreException: The instance null does not exist in the
    data store.
         at
    com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
         at java.util.AbstractList$Itr.next(AbstractList.java:416)
         at
    com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
         at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
         at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
         at
    com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
         at
    com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
         at
    com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
         ... 18 more

    Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
    Cause and prerequisites
    In very rare cases, when you store a workbook, you might not be able to open it again.
    Solution
    Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

  • /etc/oratab (a file or directory in the path name does not exists)

    Hello All,
    I ma trying to create a database oracle 11g R2 on AIX 6.1.
    But i am facing the below error at the beginning of the installation:
    /etc/oratab (a file or directory in the path name does not exists)
    Your help pls..

    When I am trying to run root.sh. it gives the below error:
    IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1> ./root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle11
    ORACLE_HOME= /apps/oracle/oracle11/app/product/11.2.0/db1
    Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
    Creating /usr/local/bin directory...
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    Finished product-specific root actions.
    ./root.sh[14]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_rdbms.sh: not found.
    ./root.sh[16]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_filemap.sh: not found.
    IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1>

  • Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

    Hi,
    I am getting this error in most of our WSUS servers.
    Content file download failed.
    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
     After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
    Log Name:      Application
    Source:        Windows Server Update Services
    Date:          12/19/2014 4:45:55 PM
    Event ID:      10032
    Task Category: 7
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ******
    Description:
    The server is failing to download some updates.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Server Update Services" />
        <EventID Qualifiers="0">10032</EventID>
        <Level>2</Level>
        <Task>7</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
        <EventRecordID>496887</EventRecordID>
        <Channel>Application</Channel>
        <Computer>*****</Computer>
         <Data>The server is failing to download some updates.</Data>
    This error is happening everyday. Please advise for a fix.

    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
    Source:        Windows Server Update Services
    Description:
    The server is failing to download some updates.
    This error is happening everyday. Please advise for a fix.
    If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
    If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
    For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
    For a downstream server, figure out what the affected updates are and fix the upstream server.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for