The Tax Club Keynote help

Hello Everyone
I work for The Tax Club and I have a question I beleieve this is the right place for me to ask:
My Keynote won't open. I have iWork '06 and Pages opens just fine but my Keynote freezes when it tries to open. I've tried reinstalling but it continues to do the same thing. Has anyone else had this problem?
Any Suggestions?
Thank you in advance.
All the Best,
The Tax Club

Just an observation, but
http://www.thetaxclub.com/
looks like its been
built in .net as some of the pages have an .aspx extension.
As for changing over to coldfusion it all depends on how
large and
complicated the existing site is and how competent the
developer is using
coldfusion.
Richard
"jdeline" <[email protected]> wrote in message
news:el8oul$f3j$[email protected]..
> MikerRoo offers good advice for medium to large Web
sites. Since you
> didn't
> indicate the number of pages at your site, you might
relax his
> recommendations
> if you have fewer than 20 pages. Looking at your site,
>
http://www.thetaxclub.com/,
I'd guess you have more than 20 pages, but
> just
> thought I'd add to the discussion.
>

Similar Messages

  • The Tax Club, Apple Graphics Card

    My name is Rob and I work for The Tax Club. I would like to know what is the top of line graphics card to use for my apple computer.
    I also would like to know what is the best graphics program for macs.
    Best Regards
    The Tax Club

    joebeegs, Welcome to the discussion area!
    What "apple computer" do you have?
    If you have an eMac, iMac, iBook, or Mac mini you can not upgrade or replace the graphics card. The graphics capability is built into the logic board.

  • About the tax form

    Hi, all:
    I had pay the $99 for iphone development.
    but i do not know how can i fill the tax form, pls help me.
    btw:i from HK, my bank is HongKong bank.
    this is form:
    http://www.zypda.com/mytax.jpg

    NOTE: I am not an expert, but this is how I did it:
    Assuming you're an individual developer, and don't represent a company:
    I
    3. Leave this set to 'individual'
    4. Residential address
    5. Mailing address
    6. Fill in 9 zeroes: 000000000
    7. Fill in your own tax id number, if you have one, or leave blank.
    8. Leave blank
    II
    Check a.
    III
    I understand that it isn't necessary to complete this.
    IV
    Check.
    Submit the form. You will be emailed the completed form, which you will then have to mail by post to Apple Inc.

  • Invoices with NUMBERS, help needed, the tax still on the invoice but it does not actually calculate it?

    Hello, I need help to display tax on the invoice, its numbers/ invoices,
    the tax is set to 21%
    it is as is but it does not calculate the tax indeed.
           subtotal    e495
    tax        21%    e0.00
    Total                e495
    any help?
    thank you

    Try reposting in the Numbers Forum

  • What is the URL for the keynote help link in the keynote app

    what is the URL for the keynote help link in the keynote app on the ipad. I have a firewall in place to keep student from accessesing unwanted/restricted information, where can I find the url/ip address to unblock this site. Thanks

    Hi Ravi,
    As such there is no path for directly opening Visual Composer from the Netweaver system (I suppose this is what you mean by the acronym nws). Visual Composer can only be opened by the URL as given by Rahul:
    http://<hostname>:<port>/VC
    Bye
    Ankur

  • I AM NOT GETTING THE TAX TAB CAN ANY ONE HELP ME

    HELLO      I AM NEW TO SAP SD WHILE CREATING THE CUSTOMER I HAVE NOT GOT THE TAX OPTION CAN ANY ONE HELP ME

    Hi
    1.Go to OVK4(check tax relevancy data for customer master) and put your tax calculation type eg. MWST-0(tax exempted)
                                                          MWST-1( full tax)
    2.Go to OVK3(check tax relevancy data for material master)
    and put your tax calculation type eg. MWST-0(tax exempted)
                                                          MWST-1( full tax)
    3.Now goto OVK1 and assign country IN to this condition type.
    4.Goto OX10 and assign your plant for tax determinaton.
    hope it helps out
    plz. drop poins in success.
    krishan kumar rai

  • Help. Can someone tell me the taxes on their triple bundle package in NYC

    Can someone with a bundle package fios tv, interenet and phone, the ~$94.99 plan tell me what the taxes are?  Basically what is the total cost of the bill per month is in NYC and if it is the same amount every month and if not how much it fluctuates.  I have looked everywhere and can't find the answer and Verizon can't tell me the number.
    Thanks

    OK.  Finally found the answer.  Thanks for all those that responded.
    Actually was able to get the triple play fios (20mps for internet), fios tv and phone for $84.99 (there was an additional discount of $10 if you order via phone).  After all applicable taxes the final bill comes to ~$102/month.  Free standard HD top box.  Hope this helps for others out there in NYC.  I assume if you were to go with the 94.99 the final bill would be ~$10 more.

  • I can't find pages and keynotes on my imac (ie not in applications folder)after purchasing them from the app store? help please!!!

    can't find pages and keynotes on my imac (ie not in applications folder)after purchasing them from the app store? help please!!!

    Try searching with Spotlight. Click the magnifying glass icon top right corner of your screen.
    If you can't locate the apps, you can re download without being charged again.
    http://support.apple.com/kb/HT2519

  • HT4623 how can i get the numbers and keynote app to work on my imac?Help!

    I downloaded the numbers and keynote apps but how do i get them to open and work on my imac or ipad?

    If you downloaded the iPad apps in iTunes on your computer, you have to sync them to the iPad. If you downloaded the Mac apps from the Mac App Store, they should open on the Mac, so I think we have to assume that you downloaded the apps for the iPad.
    The apps that work on the iPad do not work on the Mac, and the Mac apps will not work on the iPad. The Mac and the iPad have different operating systems so you must purchase the apps for both the computer and the iPad.
    If you did buy the iPad apps in iTunes on the Mac - sync them to the device.
    Connect the iPad to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Apps Tab on the right.
    Click on all of the apps that you want to sync in the list
    Click on the Sync Apps Heading.
    Click on Apply in the lower right corner of iTunes

  • My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

    My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

    There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
    The issue your having is with the way Keynote  takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
    Keynote preferences > Presenter display.
    If you want to show a wesite or another app on  either display,  use application switcher:
    press the the  command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command  > tab to return to Keynote.

  • Unable to get the tax value in Sales order

    Hi Forum,
    I am preparing a sales order for a customer with a material.
    When I go to the item conditions tab, I see that the correct tax value is being calculated but that tax value is not appearing in the TAX field.
    Net value is appearing correctly in the NET field.
    Please help me which are the areas of concerns i should look for to get the tax amount in the TAX field.
    Many thanks.
    Regards,
    Sheetal

    Dear Sheetal
    Go to V/06, select the tax condition type and execute.  There check whether you have maintained "Condition Class" as D.   If not, maintain D and then retry.
    thanks
    G. Lakshmipathi

  • Error Message FF747  -The tax amount must not be greater than the tax base

    Hello,
    We are attempting to post an import vendor invoice through transaction    FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the    FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
    We tried putting a very high percentage in the tax code also but it didn't help
    We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
    Best Regards
    Amit  Kulkarni

    Hello
    This may be  a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like  this to be posted along with the expense item

  • How to find out the condition type of the tax code in the PO document

    Hi friends,
    My questions is how to find out the condition type of the tax code in the PO document.
    When you use me23n to display one PO document. In the invoice tab, there is one text field named 'tax code' whose value could be T1, T2, J1, J2 and so on. Beside the text field, there is one button named taxes. When you click the button taxes, it will show you the condition type of the tax code. For example, if the tax code is 'T1', then its condition type 'mwcn'.
    I want to use the information on the PO to find out the value 'mwcn' of the tax code 'T1'. Could anybody help to describe the logic?it looks like the value is saved in the table konp. But I don't know the logic. Please describe. Thank you.

    Hi,
    Hope you have asked for select query..
    select single knumh from a003 into wa_knumh
      where mwskz = wa_itpotab-mwskz
      and kappl = 'TX'
      and aland = 'IN'.
    select single kbetr from konp into wa_kbetr
      where knumh = wa_knumh.
    cheers,
    Dep

  • UDF For Retrieving the Tax Code based on PO

    Hi all,
    Mine is a file to Idoc scenario.
    I wrote a FM to retrieve the Tax Code based on PO .
    Created the udf which directly gets the Taxcode from the r/3 with out importing in to the imported objects,is this correct i never tried this before.
    Find the UDF for the Same.
    final String    CHANNEL_NAME = "GeneratedReceiverChannel_RFC",
         VALNOTFOUND = "VALUE_NOT_FOUND",
         SAPRFCNS = "urn:sap-com:document:sap:rfc:functions",
         TAG_FM = "Z_P_INT012_RFC_LOOKUP",
         TAG_TAX_CODE = "T_TAX_CODE",
         TAG_TAX_CODE_P = "TAX_CODE";
    AbstractTrace trace = container.getTrace();
              DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              DocumentBuilder builder = null;
              factory.setNamespaceAware(false);
              factory.setValidating(false);
              try {
                   builder = factory.newDocumentBuilder();
              } catch (Exception e) {
                   trace.addWarning("Error creating DocumentBuilder - " + e.getMessage());
              Document docReq = null;
              try {
                   // Building up RFC Request Document
                   docReq = builder.newDocument();
                   Node root = docReq.appendChild(docReq.createElementNS(SAPRFCNS, TAG_FM));
                   Node nodeTbOpt = root.appendChild(docReq.createElement(TAG_TAX_CODE));
                   for (int i = 0; i < pernr.length; i++) {
                        Node nodeTbOptItem = nodeTbOpt.appendChild(docReq.createElement("item"));
                        nodeTbOptItem.appendChild(docReq.createElement(TAG_TAX_CODE_P)).appendChild(docReq.createTextNode(TAX_CODE<i>));
              } catch (Exception e) {
                   trace.addWarning("Error while building RFC Request  - " + e);
              trace.addInfo("RFC Request XML: " + docReq.toString());
                                                    //trace.addWarning("RFC Request XML: " + docReq.toString());
              // Lookup
              Payload load = null;
              try {
                   Channel channel = LookupService.getChannel(receiver[0], CHANNEL_NAME);
                   RfcAccessor accessor = LookupService.getRfcAccessor(channel);
                   InputStream is = new ByteArrayInputStream(docReq.toString().getBytes());
                   XmlPayload payload = LookupService.getXmlPayload(is);
                   load = accessor.call(payload);
              } catch (LookupException e) {
                   trace.addWarning("Error during lookup - " + e);
              // Parsing RFC Response Document
              Document docRsp = null;
              try {
                   docRsp = builder.parse(load.getContent());
              } catch (Exception e) {
                   trace.addWarning("Error when parsing RFC Response - " + e.getMessage());
              trace.addInfo("RFC Response XML: " + docRsp.toString());
                                                    //trace.addWarning("RFC Response XML: " + docRsp.toString());
              try {
                   NodeList res = docRsp.getElementsByTagName("item");
                   for(int i=0;i<res.getLength();i++){
                        NodeList itemNodes = res.item(i).getChildNodes();
                        Map itemMap = new HashMap();
                        for(int j=0;j<itemNodes.getLength();j++){
                             itemMap.put(itemNodes.item(j).getNodeName(), itemNodes.item(j).getFirstChild().getNodeValue());
                        rows.add(itemMap);
                                                            catch (Exception e) {
                   trace.addWarning("Result value not found in DOM - " + e);
                   result.addValue("true");
    Error:
    16:24:08 Start of test
    Source code has syntax error:  /usr/sap/XD1/DVEBMGS30/j2ee/cluster/server0/./temp/classpath_resolver/Map283041f0edf311dd960b0003bacd2461/source/com/sap/xi/tf/_MM_INT012_INVOICE_DET_.java:598: 'class' or 'interface' expected public void TaxValues$(String[] a,String[] b,ResultList result,Container container){ ^ /usr/sap/XD1/DVEBMGS30/j2ee/cluster/server0/./temp/classpath_resolver/Map283041f0edf311dd960b0003bacd2461/source/com/sap/xi/tf/_MM_INT012_INVOICE_DET_.java:618: 'class' or 'interface' expected } ^ /usr/sap/XD1/DVEBMGS30/j2ee/cluster/server0/./temp/classpath_resolver/Map283041f0edf311dd960b0003bacd2461/source/com/sap/xi/tf/_MM_INT012_INVOICE_DET_.java:619: 'class' or 'interface' expected ^ 3 errors  Source code has syntax error:  /usr/sap/XD1/DVEBMGS30/j2ee/cluster/server0/./temp/classpath_resolver/Map283041f0edf311dd960b0003bacd2461/source/com/sap/xi/tf/_MM_INT012_INVOICE_DET_.java:598: 'class' or 'interface' expected public void TaxValues$(String[] a,String[] b,ResultList result,Container container){ ^ /usr/sap/XD1/DVEBMGS30/j2ee/cluster/server0/./temp/classpath_resolver/Map283041f0edf311dd960b0003bacd2461/source/com/sap/xi/tf/_MM_INT012_INVOICE_DET_.java:618: 'class' or 'interface' expected } ^ /usr/sap/XD1/DVEBMGS30/j2ee/cluster/server0/./temp/classpath_resolver/Map283041f0edf311dd960b0003bacd2461/source/com/sap/xi/tf/_MM_INT012_INVOICE_DET_.java:619: 'class' or 'interface' expected ^ 3 errors
    16:24:11 End of test.

    Hi Potharaju,
    Why don't you try this, that really works:
    If you are using PI 7.1:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/33/1ec6ced273493a993a80c2301c03da/frameset.htm
    If you are using XI 3.0, PI 7.0
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
    Try with these.
    Regards,
    Juan

  • S_ALR_87012357 / S_ALR_87012356-Wrong reporting of tax amounts on the tax reports.

    Hi,
    S_ALR_87012357 / S_ALR_87012356
    Tax amount for tax codes V9, VP and VT are calculated and
    displayed correctly in FI reporting but they are reported at a higher amount in
    the tax reports run by transactions S_ALR_87012357 / S_ALR_87012356.
    Since its a standard report , I would expect there would  be a way of correcting this wrong tax amount showing this report .
    Is there any SAP note regarding this error ?
    Appreciate your help and advise..
    Kind Regards
    Thiru

    Hi Srikanth ,
    As you mentioned it is showing the difference ...
    Please find attached screenshot ...
    Is there a way to correct this ? since its creating an issue& confusing from Finance/Accounting point of view...
    Kind regards
    Siva..

Maybe you are looking for