The technical name is Elastic Time - the time is now
The technical name is Elastic Time - the time is now.
http://www.sonicstate.com/news/shownews.cfm?newsid=5402
This is the future of audio editing, and I sincerely hope Logic will provide this same (or superior) functionality very soon, as it is the wave of the future. I will be watching Pro Tools 4.7 LE very closely, and for obvious reasons.
Hads
I wonder what this is all about?
http://docs.info.apple.com/article.html?artnum=301075-en
"A new feature in Logic Pro 7.1 is Elastic Audio, which enables your recorded tracks to follow any tempo changes you make after you've recorded them."
Does Logic 8 have this?
I went to the blurb you mentioned and it didn't seem to explain how the Pro Tools "elastic audio" actually works. I Googled and found that Ableton Live apparently has it.
I'd never heard about it before.
Just curious 'cause I can't play my guitar to a click track and my timing varies quite a bit.
Does anyone know if this is already part of Logic?
Thanks, Johan
Similar Messages
-
In ST03 , how can i see the Query name, user id,how many times executed the
HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh -
In ST03 , how can i see the Query name, user id,how many times .
HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivsHi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay -
Display the technical name of the last level of the hierarchy
Hello,
I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
Please Advice,
DavidDavid,
Check the below possibilities.
1. You can do that in a workbook.
2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also. -
The technical name of object QVIW zabcd is not valid
Hello Gurus
I am facing a weird problem.
I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
Please help me asap
Our system is on SP18 both for abap and JavaHi Bala Duwuri,
Thanks for the input...
Can you please give me your valuable inputs on this ........
I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
Right now am following the below link But in that no where they were talking about the webdynpro eventing.
then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
Please give me a clear view on how to integrate the team viewer application with custom development WD application.
If code is required pls provide that also.............
I would appreciate the useful inputs with higher points.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
Thanks in Advance,
Dharani -
How to Rename the technical name and description of an infocube?
Hi,
How to Rename the technical name and description of an infocube?
Thanx in advance,
Ravi.Ravi,
You cant change the Technical name of the cube but you can change the description of the Cube. If you want to have a Cube with the same properties and with different Techname and Description better you do copy from the base cube and rename as per your requirement.
Regards,
Gattu. -
Can we remove the Technical name appearing in the standard SAP BI Pop-Up.
Hi,
Can we remove the Technical name appearing in the standard SAP BI Pop-Up Varaiable Screen(Selection Screen)-When we create Variable screen for BI Reporting we should specify the technical name and create it,where it appears in the Pop-Up screen within the brackets,can technical name be removed ?
Please help me out to solve this issue.
Thanks,
PreethiHi,
As per my logic, one can change description of all bi objects which includes text Input variables also.
If possbile be more specific what u want to change in Pop
Regards,
Sachinkumar. -
Is It POSSIBLE to change the Technical Name of Z-version Query
Hi Friends ,
I was changed all quereis and cube from standard version to Z version.
For queries, by using rszc , i was changed to Zversion,Now again is it
possible to change the Technical Name of Zversion Query ?
If possible , can you please tell me the process ?Hi Hameed,
This may be the reason you are getting an error.
The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
It's better to approach the Bex Query designer.
Hope you understood..
Check the link below for more information:
Re: How to copy query elements without Bex
http://www.bi-expertonline.com/article.cfm?session=&id=2055
Re: copy queries + variants + workbooks -- RSZC ?
Regards,
Ravi Kanth
Edited by: Ravi kanth on Jun 10, 2009 10:03 AM -
How to find the technical name
Hai,
How to find the technical name of a data source for General Ledger: Balances Period Breakdown
ThanksHai
my question is in General Ledger: Balances Period Breakdown
the link is showing General Ledger : Balances , Leadingledger
I got this link in queries for General Ledger: Balances Period Breakdown
http://help.sap.com/saphelp_nw70/helpdata/en/2d/955a73da4d6d41a0a6128caf274ce8/frameset.htm
But here technical name of info cube is given.But i dont know how to find the technical name of the data source.This might be simple question i think but i am new to SAP
Thanks -
Changing the technical names of an ODS and queries
Can I change the technical name of an ODS and the queries that are built on it? If so how? Thanks
Hi Niten,
As said by others it is not possible to change the technical name of any BW Object as there are too many complexities involved. However a possible option is create another ODS/cube and queries as the copy of the existing one and then transfer all the data.
Refer this post:
Re: Change infocube name
Bye
Dinesh -
I have to give the technical names to abaper for following fields to be pri
I have to give the technical names to abaper for following fields to be printed in the GRN print out
what r the table & field names for following
Buyer's name
Project Number / Cost Center
Suppliers Delivery Note Number
Quantity Remaining (per Material)
like this way it is to be add in GRN print outthis details u can get in MKPF and Mseg tables
Go to se16
put the table name and put the material document number
u will get the entries
dobul click on the entrie
and find the data u need and the field name
for ex Suppliers Delivery Note Number
Reference field name XBLNR
hope this helps
Reward if usefull -
How to get the query design element meaning with the technical name ?
In BI 7.0 query designer, we got error msg in Transport Connection like:
Object 41PPHH3DICYQ56L2XJGXDRSMT is already being
edited by user_id
Choose 'Display object' or 'Cancel'.
How to check what design element is for 41PPHH3DICYQ56L2XJGXDRSMT? And what could cause the above error?
We will give you reward points!You can collect the query and its elements in the transport connection. The under the technical name you will find this and the element.
Hope this helps.
Kumar -
SAPBEX VBA - I need the technical name of my workbook
Hello everybody,
I have to solve the following problem:
My task is to open an existing workbook (BE Analyzer) and paste a picture depending on the technical name of the workbook. I have already programed the the download of the picture, but I still need the technical name of the workbook I actual opened. I want to export this parameter with VBA and the help of RFC to my ABAP program on server. I think I have to use the package sapbex.xla, because this package know the technical name. Is it possible to link my module and the modules of the package sapbex.xla?
I hope somebody is able to help me!
PaulOk, I found a solution...
-
Can we see all the Technical names and field/common names in one screen
Hi SAP Gurus,
Can any one plz. clearify the querry of 'all the technical names, field names, common names, table names in one screen? if so, how?
Thanks inadvance
Regards
NamrataHi,
For a particular screen,if u want to see all the technical data,
Go to system->status->screen->double click on the screen->flow logic.
Regards,
Manoj. -
Hierarchy in BW and showing the technical name
I have created a Hierarchy off 0COSTCENTER. I only want the technical names of the cost centers itself to show. All other node levels I do not want the technical name to show up.
Can someone let me know if this is possible?
Thanks much,
JasonWe had the same problem. Unfortunately this setting only seems to be available for a query view. We were using web reporting anyway so we just converted the dataprovider to be a query view where this setting had been made. It's a bit ugly but it worked.
Maybe you are looking for
-
I'm trying to move things from the downloads folder into a folder that is over there on the left in the sidebar. Every time I try to move something, I get this message and then I have to give my password. I didn't have to do that previously and I sur
-
Authorization problem when using the Transaction Launcher
Hi All, We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client. We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our
-
Can I export using a single dump directory to multiple locations in oracle
I'm trying to do a full database export using expdp utility in oracle 10g. I have a single dump directory that is mapped to a particular file location say /export/dump. I don't want the entire dump file to be stored in the above path. Instead I want
-
Hello,everyone. I am using virtex6 FPGA and trying to download mcs file to PROM and have failed. I download .bit file to FPGA and succeed. When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode and the proc
-
Change Label on BP Address view
Hi Experts, I am trying to change the Text Label "Street" on the BP address screen of the business object CRMM_ACCOUNT. I have checked the technical details and found that field group acc_sres_street_v1 is exectuing for the BP address. When i have ma