The Temperature are too high!!

the mbp is 700
the arvange temperature is 55C⋯⋯
when i open a mail⋯⋯ it can reach to 82C!
and for L4D , can go to 6200 for fan and 90C
it is ok?

Should I refrain from using the computer?
Yes, backup and shut down.
I am planning on getting a new Macbook Pro in the coming months,
Now is the time, your tampering sealed it's fate.
but I just want to make sure that using the computer with only one fan won't harm it.
It will, it has dual cooling for a purpose, both sides of the cooling system need to chilled.
My computer is not working, is my personal data lost?

Similar Messages

My subs look good in dvdsp but when I burn an example the subs are too high in the frame.All my offsets are 0 and the alignment button is bottom.

My subs look good in dvdsp but when I burn an example the subs are too high in the frame.All my offsets are 0 and the alignment button is bottom.
Any thoughts

Try creating a new project, and bring in a short clip and one or 2 subtitles and see if you see the same behavior. If you don't, something's probably wonky in the project. If the sample behavior has the same problem, if you want to send it to me with the associated media, I'll take a quick look.
My email is [email protected]

Isn't there supposed to be something to shut your Mac down when the temperature gets too high like there is in Windows bios?

A program hung up and the temperature reached 192° F before I shut the Mac laptop off.
Why did this SMC Fan Control program or my Mac let the temperature get that high? If it wasn’t for SMC I would never known the temperature got that high.
Isn’t there supposed to be something that shuts The Mac down around 160° F ?
What I need it to do so that my Mac does not become a doorstop, is to have it force quit all programs at 160°F.
I could create a macro and do it myself if I can import the temperature to the clipboard and write a script that says if temperature equals 160°F force quit and then list all the programs I wanted it to force quit.
This could be easily done with Keyboard Mastro By getting the temperature from SMC fan control.
It would be nice to be able to choose which programs you wanted to force quit. Dragon Dictate locks up and raises the temperature, When the temperature gets 160 I would like Program to be forced to quit.
I don’t want to force quit pages or text editor that I might be working on that I might lose information. But to force quit all other programs like Safari, mail or iTunes, is not going to cause me to lose information as the information will still be on the mail servers and on the web.
Can someone please write a program for me?
I hope Apple is listening may be they can make that an option in their next version it should be simple to do.
I don’t mean to copy Windows Ideas, but This would be better than Windows, to actually force quit the programs causing the high temperature rather than shutting the whole machine off causing you to lose information.

It can burn your lap also Some people have gotten burns.
MBP is a Notebook. It is not a laptop & should not be used as such.
User Tip: How to deal with MacBook Pro and MacBook heat
According to the user manual it states in part:
"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
MacBook Pro: Care, Use, and Safety Information
"Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."

My phone intermittently States that the temperature is too high and so needs to cool down!! Howeve, it feels cold and I am only able to shut it down to restart it. This only temporarily resolves the problem. This started when battery was replaced.

Iphone 5 is stating that the phone is too hot and needs to cool down before it can be used. However the phone actually feels cold!! I can turn the phone off and restart it which temporarily resolves the issue. this issue stated once Apple replaced my battery. Any solutions or idease??

Take it back to Apple and have them look at it.

IPad Charger temperature goes too high

I bought iPad Mini with Retina display recently. I attached a charger properly. After some time when i touched the charger I found its temperature is too high. So I removed and checked USB side of the cable, its temperature was so high that I could not hold it for more than 4-5 seconds. Is there any problem with my charger or this happens with every charger? What should I do?

Possible sign of battery failure:
1. Very hot when charging
2. Not holding charge
3. Takes a long time to charge
How old is your battery?

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.

I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario

I can't delete partition in disk utility, it keeps telling me that "the changes are too small"

I previously split my disk into two different disks, however I want to combine them together again, yet i was unable to delete the second partition. I can't delete partition in disk utility, it keeps telling me that "the changes are too small"
Plz help!!!!!!

Make at least two complete backups of all your data. Boot from another drive and partition this one as desired. Restore the data.

How do I change my flash settings? I said I wanted to be prompted about flash wanting to store things on my computer but the prompts are too frequent and annoying!

How do I change my flash settings? I said I wanted to be prompted about flash wanting to store things on my computer but the prompts are too frequent and annoying!

New versions of Flash have a panel installed on your system for control of settings.
In Windows XP, Windows Start > Settings > Control Panel > Flash Player, click on each tab and change the "Ask..." setting. Most likely your prompts are coming from the "Storage" tab. Using any of the "Block..." settings may make Flash inoperative on some sites.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses. thanks

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses.
thanks

Thanks for the explanation, it was very helpful
Paolo Guercio
Il giorno 11/nov/2014, alle ore 17:00, Vikas.Sharma <[email protected]> ha scritto:
If you place in Muse - an image with either height or width larger than 2048 pixels - Muse scales the image down proportionately, limiting the larger dimension to 2048.
However, if you want to use the placed image at its original size, you can scale the image up to desired size either by dragging the resizing handles or by entering Height and Width values in the Control Strip on top. After that, go to the Assets panel and locate the image in there, then right click that image in Assets panel and choose "Import Larger Size". That would bring back the lost image information from the original image.
Hope this gives you clarity on what you wanted to know.
Cheers,
Vikas
>

To everyone who thinks the fonts are too small on ...

To everyone who thinks the fonts are too small on the N9 i suggest you contact Nokia about this issue. I know i am!

please see my post here: /t5/Maemo-and-MeeGo-Devices/N9-Font-too-small/m-p/1338481#M32968

The fonts are too small on my imac desktop and web browsers. Where can I increase the size?

The fonts are too small on my imac desktop and web browsers. Where can I increase the size?

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

The subtitles are too small on ATV2

the subtitles are too small on ATV2, at the movies I rent, it is not possible to enjoy the movie and read the text at the same time, what makes Apple here???

I have the same problem, changing it to large in the Accessibility menu makes them too large and annoying. I hope Apple fixes this soon!

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work.

The Temperature are too high!!

Similar Messages

Maybe you are looking for