The terms of aggreement screen after downloading A. Reader is not showing up to click and agree ....where is it?

I downloaded the latest Reader version and the screen that is last where you agree to the terms, click in the little box and then agree isn't showing up and it is the last step in activating and i am stuck until i figure it out.....help!

What is your operating system?
Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

Similar Messages

Actually, I upgraded to mac Osx I had iphoto,imovie, the whole work; However. After downloading Osx 10.5.8 it all went away and states that it's not compatible anymore.

Actually, I upgraded to mac Osx I had iphoto,imovie, the whole work; However. After downloading Osx 10.5.8 Only I photo would word, imovie would not work, my camera was not recognized. itunes was ok, After my system start having a problem I tried to re-download Mac Osx again, then I lost Imovie,iphoto, and itunes, recently I was able to get itunes back by downloading quicktime 7.7, in which i discovered through the support communities. Now I would like to
get imove, i photo if at all possible. I've read that by installing a hex something, that it works fine. But it seems to be complicated to install. Can I get some advise on this issue foe iBook G4 10.5.8? Let me know Apples are expensive. maybe it's time for a windows system. I've also heard that the refurbished mac are a piece of trash from some reviews.

You can't upgrade from Mac OS X 10.4 to Mac OS X 10.5 via a download. You would have to buy the DVD and upgrade that way.
Any applications that were using Classic emulation (OS 9 applications) in Mac OS X 10.4 would be lost in an upgrade to Mac OS X 10.5.
I've also heard that the refurbished mac are a piece of trash from some reviews.
That depends on who does the refurbishing. If you buy a refurbished Mac directly from Apple, it will be as good as a new Mac and will even have the one-year warranty that comes with a new Mac. If you buy a "refurbished" Mac from an eBay seller, all bets are off.

Stuck on the conncting to iTunes screen after downloading iOS 7.

I have tried restoring the factory settings, but I still get stuck at the connecting to iTunes screen when trying to restore my backup. Can I try now?

It is restored now. Thanks for the comment about disabling firewalls - we did that and tried again and it worked.

How do i fix a black print screen after downloading adobe reader?

I downloaded acrobat and reader late last week on my mac. I've noticed when I go to print a pdf file, the preview screen is black and when i actually print, it's black. How do i fix this please?

Quit Safari
Go to Mac HD/Library/Internet Plugins
Look for "AdobePDFViewer.plugin" and "AdobePDFViewerNPAPI.plugin"
"Trash" them both. You may need to enter your admin password.
Empty the trash.
Relaunch Safari and open the PDF.
It should be OK.

I just downloaded the new iOS 5. After downloading same I am having problems updating my locations and the time.

The location setting is on, I have tried to restore it, I have tried signing on to another wireless. Also my time will not update. I didn't have these problems until I uploaded ios5 the other day. I have a 16gb wifi.

Have you tried basics from the manual?
Restart, reset, restore.

HT1657 Stuck on Terms and conditions screen after download how do I watch my rented movie

Stuck on terms and conditions screen after downloaded rentle movie how do I watch

If you are seeing the Ts & Cs link in the Downloads tab in the iTunes app then that just means that you don't have any ongoing/queued downloads - your film has finished downloading and should be in the Videos app (iTunes on the iPad is just the iTunes store) :

I have dead blue screen after downloading the ios 7.1.1

I have dead blue screen after downloading the ios 7.1.1.
What should I do to fix it?

Hello hagarar,
If your iPhone started displaying a blue screen after running a software update, I suggest the steps in the following article.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out,
-Joe

What to do with withe screen after download ios5

my iphone turnd on white screen after download ios 5 what can i do now

If you purchased apple care plus then you can get your iPad replaced for a $49 service fee. If you didn't then out of warranty replacements start at 219 for a mini and goes up to 299 for the newer models.
If you decide to take it to a non-authorized repair place, they might fix it cheaper, but once a non-authorized place touches your device Apple washes its hands of it and will have nothing else to do with it.
So it kinda comes down to the more expensive sure bet of an out of warranty replacement or a cheaper gamble

Black screen after downloading TV show from itunes

HI. Downloaded an TV episode from itunes store. Loaded it onto laptop. Played ep and made sure it worked on laptop. Then stopped it but went back a few days later to play it. Connected laptop and TV with a HDMI cable but all it has on the laptop is a black screen with a toolbar top and bottom. Has the title of the ep and the time playing but no pik or audio. Doesn't matter whether it is connected to TV or just on laptop won't play but yet it played a few days earlier...
Help?
Also when I download a tv ep it dowbnloads two episodes, hd and sd and both are eating into my internet usuage. Is there anyway to download just one or do both need to be downloaded? Downloaded 13 ep of a season and it fully used my entire months internet allowance ;P
Toddoz

I need help with a similar issue. I downloaded one tv episode with no problems. The 2nd one I tried, I got error code 8008. I emailed iTunes Help and they gave me the instructions to delete the temporary files, restart my computer, and sign back in to iTunes and check for available updates. After doing this, I got one more to go through. I then bought another episode, and after the same problems, finally got it to go through. I was also told to check my firewall, Anti-Virus software, and any Ad-ware software because I could get 2 more episodes to download. I disabled and uninstalled what I could and tried again, with no luck. I looked last night, and the 2 episodes that won't download are in my TV Shows category under my Library heading, but they won't sync to my iPod. When I look at them in the Purchased category, they are dimmed and it won't let me do anything with them. So far, I haven't heard anything from Support.

TS1545 I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbo

I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.

You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

IPhone 4: My IPhone keeps in the "plug-into-iTunes-screen" after trying to update to iOS 5.0. The phone is not showing up as a device in iTunes anymore.

My IPhone doesn't turn on and keeps in the "plug-into-Tunes-screen" after update to new IOs 5.0 yesterday. I also tried to restore it, but it still keeps in the plugin mode. In ITunes the IPhone doesn't show up as a device anymore, but Windows 7 detects it as a camera. I started the problem diagnose via ITunes and it says "iPhone can't be found".I'm using the new version of iTunes.
Can anyone help me?

I have the exact same problem and have just logged on here to see if anyone can help also? My iphone is up and working but itunes won't recognise it as a device... just updated itunes aswell.
Any help would be hugely appreciated!!

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. How do I uninstall and reinstall the software? Adobe's instructions are only for Window devices.

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. I suspect corrupt software. How do I uninstall and reinstall the software? Adobe's on-line instructions are only for Window devices.

You can just drag the file to the trash. If you want you can remove the pdf plug-in from the internet-plug in folder, but that should not be necessary to correct your problem.

Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

Try PRAM reset.
Reset PRAM: http://support.apple.com/kb/PH14222
Best.

Why would I get a bright green vertical line down the center of my screen after playing a game?

Why would I get a bright green vertical line down the middle of my screen after playing a game?

Hi @DustMidnight85
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with the display but if you adjust the position of the display it disappears.
Here is a link to Display Quality Issues that may help.
As you stated it goes away when you reposition the display the connection cable may have become loose or damaged from opening and closing the display.
Here is a link to the HP Pavilion 14 Notebook PC, HP Pavilion 14 Touchsmart Notebook PC, HP Pavilion 14 Touchsmart Ultrabo.... Chapter 4 page 36 has removal instructions that may assist you in checking for that problem.
If your notebook is in warranty or you would like help please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My phone is stuck on the connect to itunes screen after trying to recover it to a backup.what should i do???

my phone is stuck on the connect to itunes screen after trying to recover it to a backup.what should i do???
PLEASE HELP!!!

Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.

The terms of aggreement screen after downloading A. Reader is not showing up to click and agree ....where is it?

Similar Messages

Maybe you are looking for