The text contains formattings

Team,
I'm trying to print a PO and some of the text are supposed to be underlined, but aren't
On change mode, I get the message below:
Text contains formatting -> SAPscript editor
Message no. MEPO089
Diagnosis
The text contains formattings that cannot be represented using the continuous text editor.
Procedure
To edit the text, invoke the SAPscript editor or the line editor.
I will appreciate your feedback on how to edit the text formatting.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jun 17, 2009 1:18 PM

On the change mode, go to item text , double click on the text space, and go to change editor to edit the text

Similar Messages

Field in portal table for the text contained in an uploaded file

I have uploaded a file of base item type file into release 2 of the portal.
Does anyone know which table the clob field for the text contained in
the uploaded file is stored?
Thanks,
Suzanne

Hi,
When you run the Search hep is it giving the description or not
You have to create the serarch help with both the fieldname and its description field then we cna the values. Or
Try to mantain the text table for this field and get the data.
Get the valeusinto drop drown with this table Or create the SearchHelp for this text table
Regards
Lekha

I need to delete a text that keeps locking up my iPod. The text contains a long string of emojis (a bunch of ant symbols). It keeps locking up the iMessage screen. Was doing it on my iPhone to

I need to delete a text that keeps locking up my iPod. The text contains a long string of emojis (a bunch of ant symbols). It keeps locking up the iMessage screen. Was doing it on my iPhone too. How do I delete an old text that keeps trying to come through my apple Id?
Thanks?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Use Regular Expressions to remove open/close anchor tags but leave the text contained within alone

I have a large file with lots of anchor tags. Many of the anchor tags have no HREF specified and do nothing. They aren't hurting anything, either, but I'd like to get rid of them, leaving the anchor tags that do have HREF alone, and leaving the text between the tags alone. Here's an example: <a>A resident or municipality may seek to vacate 25.01.01</a>.
I've come up with this to identify those tags: <\a>(.)*</\a> and it works, it finds them, but what should I put in the Replace area in order to remove the open/close tags but leave the text as it is?

I'm a reg ex idiot. So I use the Search Specific Tag feature whenever I can. See screenshot, hit Replace All. But please do this on a backed-up document to be sure it does what you want.
Nancy O.

How do you change the text contained within an iCal reminder ?

Basically I want the iCal reminder to be converted to plain text so that when the reminder is sent to (the client's) email (which is in essence their mobile phone via an SMS gateway) so that the email gives them the appointment time (and date) rather than as an iCal attachment with the standard email
Hope I am making sense
Please help !!!!!

Hi again,
I am using Calendar (rather than iCal) which doesn't give me the above options when using Automator.
I have never really used automator so I am in need of virtually a complete walk through.
Thanks for the help so far

Fetching the text containing the link..

Dear All,
I have an link annotation which has a text content embedded in the PDF can anyone suggest how to fetch the index position and the length of this text..
*Note: Here is the figure of the PDF Content tree view for more reference
Regard's
Amith Sai

An ORA-00600 error indicates an internal Oracle error. There are literally thousands of possible reasons that you might get one of these, but it generally boils down to Oracle bugs (you should never get this sort of error).
- You'll need to log a support request with Oracle Support
- There should be a number of parameters (generally rather cryptic) that come with the ORA-00600 error. You should look up those particular parameters in the Metalink ORA-00600 lookup tool
- Hopefully, that tool will point you at a patch or a workaround. If not, you'll need to get support to figure out what's going on behind the scenes.
Justin

Change screen size of text container

Hi,
Requirement is we need to enlarge the text container screen in service order. help full information will be appreciated.
Regards
Rams

Thank you, SagarK
Ok,
I hope increase size of Power View sheet
Regards,
Yoshihiro Kawabata

"Alert : Text contains formatting (see detail screen) "

Hi everyone!
In my service desk transaction monitor, when i click on one particular transaction (this problem doesnt exist with other transactions), it opens up flagging a message "Text contains formatting (see detail screen)". [Message no. COM_TEXT202]. The performance assisstant states that "The text contains formatting that cannot be displayed in Text Edit Control."
Can anyone please tell me why is this message getting displayed? And what should be done so that it doesn't appear?
Thanks & Regards
Taj

Hi Deelip!
Kindly repost your question as a new topic as the thread you have posted it into is on a different line.
However to answer your question, refer the following link
http://www.sap.com/services/pdf/CS_Bharat_Petroleum.pdf
Hope it helps.
Regards,
Taj

How to disable Text Container Manager

From Flash Help:
"TCM text for static TLF Flash Pro
CS5.5 uses the Text Container Manager to handle TLF text that is not intended to
change at runtime. The TCM avoids the need to include the full TLF ActionScript library in the published SWF file,
significantly reducing file size."
How can I turn this off? I need TLFTextField in my swf.
I know that I can assign name to TLFTextField to prevent flash from converting it to TCMText but I have many of them exported from InDesign to fla.
Is there any way to turning off TCM globally??
sorry for my English

I understand what you want to do but Flash is simply doing what it told you it would. It greatly optimizes speed while retaining the excellent readability of TLF text (especially in printing) but if you don't name the text fields then it promised it would self-optimize and use TCM.
Being this is the Flash forum unfortunately I can't answer this but if there was an answer to this it would probably rely on InDesigns advanced flash export options rather than Flash's import options. Something to the effect of "autoname text instances" or similar. If you need the text TLF so you can edit it, how do you expect to do that without giving instance names anyhow? You'd literally need to iterate the display list and "guess" which textfield you may be working with. Giving it a name assures you edit the correct text, albeit a PITA and time consuming.

Is it possible to get the output of a text container into Spool..?

Hi
I am trying to write a report for a standard transaction(SM65) in BDC and run thru background job so as to get the output in to Spool. Right now I am facing an issue to get the SM65(text container) tcode output into spool.
FYI..I am using "CALL TRANSACTION 'SM65' USING BDCDATA MODE 'E'."
Please provide tour valuable inputs.
Thanks!
Shiv

Hi Shiv,
Instead of writing BDC for T-code SM65 I would suggest you to use following function module to get the required data.
      CALL FUNCTION 'BPT_ANALYSE_START'
        EXPORTING
          server_name            = servername_tmp
          check_all_btc_servers = sbpt1020-allsrvchk
          profile_check          = sbpt1020-profilechk
          xpgm_environment_check = sbpt1020-xpgmcheck
        TABLES
          protocol_tbl           = global_protocol_tbl
        EXCEPTIONS
          OTHERS                 = 99.
Once you got the data into "global_protocol_tbl " you can create spool of it.

Why does text on certain portions of websites, usually when adjacent text contains special characters, become jumbled into seemingly random sets of characters that are not in any way jumbled when viewing the source of the webpage? How can I fix this?

When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

How do I programatically change the text in a listbox that is contained in a cluster?

How do I programatically change the text in a listbox that is contained in a cluster?

In the front panel, right click on the listbox object and select create>attribute node.
In the diagram click on the attribute node and select "Item Names".
Connect the desired array of string to the attribute node.
BigBen

Can I align the last line of a text container to to bottom of a container?

Is it possible to take the last line in a text container and vertically align it to the bottom? I'm aware that I can justify the entire text container vertically to achieve this effect. However, this means tha every line in the container is now spaced out with increased leading.
Here's a screen capture of what I mean.
On the right is a text container without any vertical justification and sized to fit the text. On the left is a text container that I've sized to match the height of the right container. In order to get the last line to align to the bottom I used the Justify vertically option. But my bullets are now spread out.
Basically I just want the last line aligned to the bottom and the rest of the text above it to be aligned to the top.
Is there anyway to do this with just one text container? Or will I be forced to used two text containers?
I'm using InDesign CS5 if that matters.

I think I'd do this with a two-cell table.

I have created a form that contains fields with default text for a user to update/personalize. Is there a way to style the text so I can quickly identify changes to default text in a field?

I have created a form that contains fields with default text for a user to update/personalize. Is there a way to style the text so I can quickly identify changes to default text in a field?

George - Thanks you so much! Actually, i'd love for the text color to be red font color. Could you send me the script for that? And I assume I just copy and paste the script into the field properties (see screenshot)?
thanks again!
Seth

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

The text contains formattings

Similar Messages

Maybe you are looking for