The thread only shows the first message

Hi everybody,
I already had this problem once before. Now I got another occurrence of that problem - from my threads I see that there is a new message in the thread I participated yesterday. I open it and I only see a single first message not all other messages. I can
also see that the thread has been renamed since the original title. Not sure if it helps in identifying the problem
http://social.technet.microsoft.com/Forums/en-US/544cd2c1-a19b-46bb-84bc-25beb6e28ef4/how-to-call-stored-procedure?forum=transactsql
I am using Google Chrome and I only see OP's first message right now.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

can also see that the thread has been renamed since the original title.
That suggests to me that some moderation may have gone awry.  I have a few instances of that on Answers but none here that I can think of.  The problem would be that a moderator would split or edit a thread but somehow leave it in my My Threads,
thus giving me the continual irritation of seeing something that I had once contributed to but no longer with my contribution in it.  It would be much less of a problem if it would not have any association with My Threads.
Robert Aldwinckle

Similar Messages

  • SAPScript:  why the window only show the LAST line

    Dears,
    In my form, one of the window only show the LAST line of the it.
    I have set the window enough space,  also when  debuging the program , open_form, write_form,
    all of those sy-subrc = 0.
    both static texts and dynamic texts are set  in the window,   but only the last line shown.
    Anyone could help me?
    Thanks a lot.
    Sincerely,
    Julie Lv

    Hi,
    There are several possibilities to resolve your problem.
    You can work with 2 main windows on in1 page.
    With NEW-WINDOW you switch to the next main-window
    How to use it.
    make an item in main window with that /: NEW-WINDOW command
    if you are ready with first loop call a WRITE_FORM with that NEW-WINDOW statement.
    to cojntinue in the other main.
    Other possibility is. (in case there are not ot many lines)
    Use for every line other variable names.
    Fill these in the loop. And after loop WRITE FORM
    eg. (if maximum is 3 lines)
    &VAR1_1& &VAR1_2& &VAR1_3& &VAR1_4&
    &VAR2_1& &VAR2_2& &VAR2_3& &VAR2_4&
    &VAR3_1& &VAR3_2& &VAR3_3& &VAR3_4&
    Hope this helps.
    Gr., Frank

  • My apple TV box is not working. The light blinks but the TV only shows the apple picture and nothing happens. Any ideas what is wrong?

    My apple TV is not working. The light blinks but the TV only shows the apple picture and nothing happens. Any idea why?

    James,
    Thank you for the information. I did what you said but it is still not working. My apple box works with my wifi so I think the wife was disconnected and I can't figure out where to go to set up the wifi pass word for the apple box. Any hits would be appreciated if not my next step is to ship back the box to apple.
    Thanks,
    Marta

  • I purchaised MPV's Core Numbers '09 101 software online yesterday. The software only shows the toutorial, and I couldn't find the actual spread sheet. I have taken a long time watching the toutorial. Please help me on how I can find the actual program.

    I purchaised MPV's Core Numbers '09 101 software online yesterday. The software only shows the toutorial, and I couldn't find the actual spread sheet. I have taken a long time watching the toutorial. Please help me on how I can find the actual spread sheet to work on. Thank you in advance

    Visit the developer site for help.
    https://www.appomator.com/support/

  • HT1386 iphone is frozen.  the screen only shows the usb plug icon, the word itunes and the itunes logo.  the whole phone is frozen

    iphone is frozen.  the screen only shows the usb plug icon, the word itunes and the itunes logo.  the whole phone is frozen

    Connect it to your computer and open iTunes, it will probably prompt you to restore it.

  • The browser only shows the viewname of the form?

    Hey,
    i'm working with the SAP NW2004s Developer Workplace SR2 Preview. Installed Adobe Reader 7.0.9 and xACF NW04S SP13 related to the SAP Note 766191.
    I created a form which actually has no functionality so far, cause i wanted to see if the system works fine. I just created some context nodes and put them into the form.
    First, i had problems with the credentials, but this is solved.
    Now, the browser<b> only shows the viewname</b> of my form, but no PDF. DeveloperStudio hasn't thrown any errors.
    Can you help?
    thanks,
    Thorben

    Hi Thorben,
    Have you checked if ADS is configured correctly. To do so type the following in the browser.
    http://<server>:<port>/AdobeDocumentServices/Config
    Select Test
    Select rpData
    Without entering any parameters, Click Send.
    Provide the ADSUser username and Password and click Submit.
    If the config is correct you will receive the Version info . Ignore the string " "PDFDocument" not found or it is empty."
    If you don't receive the version info, you willl have to do the configuration again.
    If the configuration is correct, Make sure that Active X is enabled in the browser settings.
    In addition, check out the following thread
    Adobe form is not displayed
    Hope this helps.

  • Our menu bar no longer works correctly. The flyouts only show the first menu option and none of the drop-down menu options.

    In previous versions of Mozilla we had drop-down menus that contained flyouts that offered more drop-down options. This no longer works in Mozilla 4. If you look at our website in IE7, 8 or 9 and Mozilla 4.0.2 they now work differently. (www.saskschoolboards.ca) Eg. Under About Us / Committees there should be three more dropdowns on a flyout - Committee List; MEPP Report and Semi-Annual Report form. Mozilla 4.0 only shows Committee List and no other drops downs. All of our flyouts are showing only the first selection and nothing else.
    Other affected menus dropdowns are:
    Board Dev / Trustee Development (there should be 4 dropdowns - not just one)
    Communications has Surveys and Elections
    Why is Mozilla not showing our menus correctly anymore?
    Andrea Ashton - [email protected]

    I see this error in the Tools > Error Console:<br />
    <br />
    <blockquote>Error: D.getStyle is not a function
    Source File: http://www.saskschoolboards.ca/js/mootools.js
    Line: 279
    </blockquote>
    It looks that the mootools script is no longer compatible with Firefox 4.<br />
    Google Chrome behaves the same and also doesn't open the sub-menus properly and keep the first entry on display once it is open.
    Did you check if there is an update for that script?
    A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • HT201263 I purchased an 1gen 16GB Ipod from a seller. The ipod only shows the connect to itunes logo when connected to computer. The display shows without the word itunes. I got error codes 1603 and 1604 and have followed all the steps that were shown on

    I purchased a 16gb ipod touch 1 gen and it wont restore or show the battery chaging icon. It shows the symbol of usb cable and what appears to be an itunes symbol without the itunes words being displayed. Upon trying to restore I have gotten error codes 1603 & 1604. I referred to the apple website for assistance and followed the steps to the letter with no results. So what else should I try or could I try because I have has no such luch thus far? I have held the home button and power button I tried to enter DFU mode but unsuccessful due to the screen boots with apple logo then immediately goes to the itunes screen and no further only when connected. Will not power on without usb connection have charged battery to see if it was the issue and no battery bar locator displays with or without being connected to PC.

    So you did all this:
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    http://support.apple.com/kb/TS3694#error1603
    Did you try the last paragraph too?

  • Update the iPad 2 with new iOS uppgrade, but after the screen only show the apple and nothing else. has been the case since yesterday. have turned off the iPad and turned it on again many times, but still only apple shown. What should I do?

    UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?

    Did you try to connect in recovery mode, explained in this article?
    iOS: Unable to update or restore

  • TS3744 I updated I Tunes today and now I cannot open my I-Pod I Touch. The screen only shows the I tunes icon with the USB cable and an arrow pointint to the icon and I can't get it off of my screen or access my home screen   Help!

    I updated I tunes today , now I am unable to open my I Pod I Touch, the screen shows the I Tunes logo with a USB cord and arrow pointing back up to the icon, can't access my Home page

    The screen indicates that your device is in recovery mode.  It has to be restored by connecting it to a computer with itunes.  Restore to factory settings.
    This happens sometimes.  Hopefully you have a backup.
    HTH

  • My phone functions but the screen only shows the apple logo

    I have an iPhone 4S and it randomly froze and the screen went directly to the apple logo. It still works like music can come on and it buzzes when it's plugged in. The only other problem is that I can't use my lock button since it's been broken for a while. Please help I really need to get this fixed ASAP.

    M_Moreno631 wrote:
    I have an iPhone 4S and it randomly froze and the screen went directly to the apple logo.
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    M_Moreno631 wrote:
    I... The only other problem is that I can't use my lock button since it's been broken for a while. ...
    This poses a severe Limitation on Troubleshooting... Suggest you Visit an Apple Store or AASP (Authorized Apple Service Provider) for the Broken Lock Button issue.
    Be sure to make an appointment first...

  • HT1369 An update(newer version) was taking place for my iPod touch and I was knocked off line, Now, my iPod won't turn on or off and the screen only shows the Apple insignia and an empty oblong circle  where  it would have  filled when the update was succ

    A newer verion update for my iPod touch was taking place when I got knocked off line,Now,I have no connection to be able to use my iPod.Just a Black screen with the Apple insignia and an oblong circle that would have filled when the update was finished appears and the iPod won't turn on or off. What can I do to remedy the situation.?

    Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097

  • My ipod all of a sudden blacked out and now it only shows the apple icon. When i press the on/off or home button it still remains with the apple icon. I tried plugging it to my lap top and going to i tunes but it says there is an error in the device

    I was looking through my pictures and when i tapped to see a specific one my ipod blacked out. Now the screen only shows the apple icon and I cant go anywhere. I tried preshing the on/off and home button but it won't work. I even pressed both at the same time for 10 seconds and still nothing... I connected it to my lap top and went to my itunes account but it tells me that the device that i just plugged in has an error. I already tried plugging it back in several times and it still won't work. I don't know what else to do. I havn't had it for a whole year yet so its still insured to the apple company right? at least thats what I heard

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201406 while trying to update my ipod touch  something happened and now my screen only shows the apple logo and nothing else happens

    while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1267 iphone only showing the apple icon I have done the home button with the sleep to restart it but it's not doing anything

    can't locate the serial number the phone only shows the apple icon I charged it. I will only show the apple icon?

    If you decide that you want to Restore the iPhone Firmware then. Open iTunes on computer, connect iPhone to computer with USB cable. Hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button for about another 20 seconds, until iTunes recognizes the iPhone in Recovery Mode. If the iPhone screen is black this is good. Restore the iPhone Firmware. If you get Recovery Mode but the iPhone shows the iTunes screen you can try to Restore, but if it fails, do the instructions again until you get Recovery Mode with black iPhone screen.

Maybe you are looking for

  • Since upgrading to iOS 6 I am not getting prompted for my password when I update apps. Why is this?

    When I updated apps on my ipad2 and iphone4S I used to get prompted for my password within a certain time.  So I could update a couple and then 10 minutes later if I wanted to download or update something else I would need to put in my password again

  • Forcing iPad1 to full display on data projector

    I read somewhere that there is possible to have full display of iPad 1 in data projector by about using some software "adaptation"... I´m not talking about jailbraking - I read it iSt absolutly legal... Anyway, I'm totaly rookie on this... Could anyo

  • Back ground schedule all parked invoice to post

    HI, Can any one tell me logic or badi or exit to post all parked invoice by scheduling as background job... thank you... Moderator Message:We do not consider it good style to ask questions before trying to find the solution yourself. Please refer in

  • Sequencing problem with Batch Writing

    I'm using TopLink - 9.0.3.5 and I want to use the registerAllObjects method from the UnitOfWork instead of registering each individually to batch write records to the db. Here is a snippet of what I'm doing: Session session = ToplinkUtils.getSession(

  • Itunes blurry in 1920x1080: a fix?

    Hello everyone, I've got another question for you experts out there. I am using a 1920x1080 display on my windows 7 sony laptop and iTunes is dispointgly blurry, just like if it was "zoomed on". I've attached a screenshot (I dunno if you can see well