The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC

The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC. The actual files are fine and open with the correct rich colors, but the colors don't look as vibrant as they should when viewing in Bridge. It's only PDFs that are affected. The InDesign thumbnails/previews display correctly in Bridge.
This was not happening when I was using CS6. This is only a problem since the upgrade to CC.
Any help you could provide would be appreciated. Thanks!

If you're going to mess with the registry
- create a restore point http://windows.microsoft.com/en-ie/windows7/create-a-restore-point
- backup the registry http://windows.microsoft.com/en-us/windows/back-up-registry
I absolutely plead with all my heart - don't start changing registry entries unless you know what you're doing - or ask your IT department to take a look.
If you don't have an IT department, then source a good professional that can make these changes.
If any way unsure - then under any circumstances, - do not mess with the registry.

Similar Messages

PDF (created in Indesign CS4) separates in CMYK, in stead of PMS

I have sent a PDF, created in Indesign CS4, to the printer. I need the design to be printed in PMS colors, but the printer says the PDF color separates in CMYK, not PMS colors.
I'm at my wits end trying to find where I went wrong (I should add I'm a beginner at all this). I need help...
Here's what I did:
I have changed the colors in a CMYK based design of a business card to PMS colors. I have changed the colors of an Illustrator file that is used in the design to PMS colors as well.
When I look at the separations preview it looks fine, only PMS colors.
I then created a PDF, using the [High Quality Print] Adobe PDF preset. In Output Color Conversion is set to 'No Color Conversion'. In the Ink Manager 'All spots to process' is not checked. CMYK inks are visible in the Ink Manager, but so are the Pantone Inks I used.
I noticed one strange thing, the swatch options for Pantone Process Cyan C are different thatn those in other PMS colors, the Colortype is 'spot' but the Color Mode is CMYK, greyed out so that I can't change it to Pantone Solid Coated. Even weirder, I can't delete that strange swatch. I tried adding the pantone colors to my swatches again, in a different file, I added Pantone Cyan C and it looked fine, but when I reopened the swatch options it was strange again.

Yes, I have added cropmarks and page info to the pdf.
I checked the separations in Acrobat Pro with a friend. Both Pantone colors and CMYK show up. When I disable the CMYK, nothing of the design disappears (cropmarks and page info don't disappear either, they seem to be in both Pantone and CMYK).
I saved a new pdf, without crops and page info, and CMYK still shows up in the separations.
I'll contact the printer tomorrow, I'm pretty sure he should be able to use the file I sent him.
Thank you all for your help!

Where has the thumbnail preview gone?

I recently upgraded from CS5 to the latest version and I'm having trouble adjusting. One of the smallest but most usable features of previous versions of photoshop has been that when I go to File > open and browse to one of my thousands of image folders Photoshop will display a small thumbnail of whichever image I have selected.
This is essential so that I can tell which images I need rather than by file name which is useless.
I'm probably just being thick and just need to find where to switch on the thumbnail preview. Can anyone advise?

Windows on its' own does not provide thumbnail previews of psd files. A product I recommend without hesitation is Ardfrey PSD Codec.
http://www.ardfry.com/psd-codec/
Windows 32 and 64 bit thumbnail support for these file formats:
Adobe Photoshop PSD PSB and Adobe PhotoDeluxe PDD files
EPS files with embedded screen representations and thumbnail medadata
most Adobe Illustrator AI files
InDesign INDD files from CS2 and later that were saved with preview images
(New!) PDF files that were saved with XMP thumbnails. Even broader support for PDF thumbnails is provided when Adobe Reader is installed.
The main reason I need this software is when I am using Windows Explorer to upload my screenshots,or open files in programs that do not use Bridge,as well as viewing my Explorer folders. It's great to have eyeball confirmation that the correct file is selected. It's worth the shekels.
Just a few samples in Extra Large thumbnail view.
Gene

Two page display of pdf created in InDesign CS4 js

Hi, I need to set page desplay for pdf created in InDesign to two page view and I couldn't find anything like that in OMV. I assume it will be setting preferances for Matadata. Would you be able to help me.
Thank you.
Yulia

@Yulia:
You can set all "open"-options with Acrobat Pro and you can automate this with a batch process under "Advanced => Document Processing => Batch Processing".
Also there is a way to do that through pdfmark instructions inside a placed EPS. Documentation for doing a "Two-Up (Cover page)" with pdfmarks is not available in the pdfmarkReference_v9.pdf for the PageLayout-tag. And of course you have to use Distiller to get the pdfmarks working, no chance doing that trick with PDF export.
Here is the pdfmark-code for an EPS you can work with (found and adapted it from the "PostScript & PDF-Bible" by Thomas Merz and Olaf Drümmer):
%!PS-Adobe-3.0 EPSF-3.0
%%BoundingBox: 0 0 72 72
%%EndProlog
/pdfmark where {pop} {userdict /pdfmark /cleartomark load put} ifelse
[ {ThisPage} << /Trans << /S /Dissolve >> >> /PUT pdfmark
[ {Catalog} << /PageLayout /TwoColumnRight >> /PUT pdfmark
%%EOF
Save the code as a plain text file with the ".eps" suffix. Place it on any page you want to print of your InDesign layout, write a PostScript file and distill it to pdf. You should get a "Two-Up" view when opening it in Acrobat.
Meanwhile (after doing a little research on the web) it seams that all possible "/PageLayout" parameter pairs are indeed documented, but not in the pdfmarkReference_v9.pdf, but in the PDF32000_2008.pdf on page 73:
SinglePage     Display one page at a time
OneColumn     Display the pages in one column
TwoColumnLeft     Display the pages in two columns, with odd-numbered pages on the left
TwoColumnRight     Display the pages in two columns, with odd-numbered pages on the right
TwoPageLeft     (PDF 1.5) Display the pages two at a time, with odd-numbered pages on the left
TwoPageRight     (PDF 1.5) Display the pages two at a time, with odd-numbered pages on the right
Default value: SinglePage.
Uwe

Exchange Office Web Apps Preview Does not work in OWA. An error occurred while the document preview was being created

Hi,
I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
When I login to owa for user test1 and preview the attachment it works fine.
However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
" An error occurred while the document preview was being created. Please try again later " as follows
I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Does the error appear when you directly access test 2 mailbox through OWA?
2. Check if there is 141 error in your event log.
3. Check whether Office web app server connects with Exchange server when the issue happens.
Access the URL: https://hostname/hosting/discovery
4. Grant full access permission again and check the result.
For more information about Office web app integration with Exchange, please refer to the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Does anyone know how to change the copy on a pdf made in Indesign? I don't have that software on my Mac

Does anyone know how to change the text on a pdf made in Indesign when my Mac doesn't have that software? Thanks,

If you don't have access to Acrobat Pro or Nitro PDF Pro, see this article:
http://www.labnol.org/software/edit-pdf-files/10870/

How do I change the thumbnail preview picture

How do I change the thumbnail preview picture? I've got a 3d model and I want a particular view to be the thumbnail picture as well as the default view. I believe I've done that before but cannot figure out how I did it.

I'm working with pages that are comprised only one picture of a 3d object (a table). I really believe I was able to change the thumbnail to a particular point of view but can't remember how I did it. It's been so long that I can't remember, but I'm pretty sure I was able to.

Performance, minimum bandwidth, thumbnail previews for PDF and InDesign Files with web content viewer

Hi,
We are considering using DPS with a web content viewer for large PDFs and/or InDesign files. The client using a web viewer might have very limited bandwidth (some as low as 256Kbps). We ask:
1 - How well does the web viewer perform with very large PDFs and InDesign files (500 MB+) with limited bandwidth? Does the file stream in chunks and the PDF shows as soon as the first page or two are available, with the rest loading in the background, or does the entire file come down in one part and then shown?
2 - Can PDF and InDesign files support thumbnail previews? For example, one image per PDF page and user can scroll forward and back.
Your thoughts and comments are greatly appreciated.
Thanks!
-Stephen

Hi Stephen,
The way the web viewer works is that it converts the PDF/InDesign files to PNGs along with additional HTML assets. Assets are downloaded as they’re ready for a given page (e.g. first, page 1 is filled with its assets as they become available, then page 2, etc), so a reader wouldn’t need to wait for the entire article to load. The next few pages are also loaded in the background, so the reader wouldn’t be likely to notice lag as they flipped through pages to the next page after reading the current one. So the lag will depend on the size of an individual page.
For your question around thumbnails, the web viewer does not load a preview image so the reader would need to wait for the assets I described above to load.
Hope this helps...
Brian

Opening a PDF in a specific page from a PDF created in indesign

Hello, I'm working with CS4 and I need you to click on a button, or from a "hyperlink" in a text, open a pdf file but for a given page.
I can not change the target pdf and also I have to access a single pdf into multiple pages, put an example
persone one speaks at the pdf 1, on page 14
person two speaking in pdf 1, on page 15
I wish that when you click on the person 1 opens pdf 1 on page 14, and when you click on the person 2 opens pdf 1 on page 15
Thanks in advance
mateo

Thanks, I had not noticed in the new dialogue coming out. Thank you very much. A greeting.
Muchas gracias
mateo
Rectification
ohhh, no, the page references are to an indesign document, not a PDF
I have not indesign files where you created the PDF to which I have to jump and I can not add bookmarks to pdf, pdf files are protected.
thanks

PDF created in InDesign -Field Visibility Issues in LifeCycle

I am working with pdf versions of brochures created in InDesign/Illustrator etc. I am adding two simple fields to these forms and in the past it has worked easily. I have an image field where a logo can be uploaded and a text field next to it. Behind the image field I have always used another text field visible on screen but not in print That simply states, "place logo here". This A.M. I had an update from Adobe that installed and now if I designate the field as visible on screen, it prints. This is the simplest of forms and I am wondering if I may have inadvertantly changed a setting somewhere along the way that has deactivated this option.

Yes, I have added cropmarks and page info to the pdf.
I checked the separations in Acrobat Pro with a friend. Both Pantone colors and CMYK show up. When I disable the CMYK, nothing of the design disappears (cropmarks and page info don't disappear either, they seem to be in both Pantone and CMYK).
I saved a new pdf, without crops and page info, and CMYK still shows up in the separations.
I'll contact the printer tomorrow, I'm pretty sure he should be able to use the file I sent him.
Thank you all for your help!

Problem when printing from PDF created by InDesign

Ok, here's the scenario!
I have a flyer, created in InDesign. I have drawn a grey curve (in InDesign) which goes at the top of each page.
I import a transparent logo in PSD format, and place it on top of the grey curve.
In InDesign and when I PDF it, it looks fine (at any zoom level).
However when I print it, there is a slight outline around the transparent logo and it has a slightly different shade of grey as its background (it stands out from the curve).
Does anyone know why this could be? I also tried importing the logo with the same grey background as in InDesign but the same problem occurs.
Any help appreciated!

If you can't select composite CMYK it means your printer isn't postscript, or you aren't using the postscript driver option if one is available.
Since this is a printer-related function, not a property of the file itself, you don't want to do anything to your pdf to compensate. That's the printer's job, if necessary, when he processes your PDF.

How do I add to a pdf created through InDesign?

I want to add some more text to a book cover that someone else created in InDesign. They only gave me a pdf. What's the best way to do it? Also, the new text has to be a specific yellow Pantone color.
Thank you!

Place that PDF in a new InDesign document and add your text over the top of it... To create the specific yellow colour use the swayches panel and menu.

Annotations made in Preview to PDFs created from MS Word corrupts PDF

In Preview, when I save annotations to PDFs created from an MS Word document, the PDF seems to be corrupted. Searching in the PDF no longer shows any results, and text copied from the PDF is displayed as a series of meaningless characters when pasted into a note annotation, or pasted into another file (e.g. a TextEdit file). So for example, "the monitoring of progress" becomes ")@%8,1),&12%,=%4&,2&//" when copied and pasted.
Is there any way to prevent PDFs from being corrupted in this way, or to restore the PDF so that searching and copying work correctly?

I suspect this is a problem with M$ failing to handle PDF files correctly. I would suggest you ask your question over on the M$ forums instead of here.
Allan

Acrobat Pro 9 - Disable thumbnail preview in PDF file icons on Desktop

After upgrading to Acrobat Pro 9, the file icons of PDF files on my Windows 7 desktop changed to showing a thumbnail preview. I want to get the standard PDF file icon back for all PDF files. Can someone please tell me how?
Thanks.

Did you ever find an answer for this??? I had the same issue and was searching for an answer. I saw this and since I fixed mine I thought I would tell you what I did. Also, in case someone else finds this and needs an answer.
Opened Windows Explorer -> Tools -> Folder Options
Go to the View tab
Check "Always show icons, never thumbnails"
Hit Apply
All your PDF files on your desktop should now show with the generic PDF icon.
Reverse this to get the preview icon "thumbnails".

PDF created with InDesign CS6, Helvetica Neue font, causes lower-case "r's" to be bold

The pdf was created from InDesign CS6 using Windows 7. I cannot recreate the problem on my machine, but it is happening on a coworker's machine. The only character affected is the lower-case r. It appears bold when viewing the pdf of his machine. I am also running Windows 7 and it looks fine to me. My boss is using a Mac and it also looks fine to her. Does anyone know what might be causing this problem?

Hmm...until it's isolated to the 'r' it surely sounds like the typical effect often caused by the "Enhance Thin Lines" preference setting in Acrobat/Reader/browser-x-plugin, which most commonly affects l's and i's.
It's also true that various servings of Helvetica Neue are at the center of many such tales of woe.
I'd recommend some simple testing on the co-worker's computer with PDF's produced under the same conditions using different fonts; perhaps some varied weights of the same Helvetica Neue.

The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC

Similar Messages

Maybe you are looking for