The time at which the PO has got saved

Hi Frnd,
  Can  i get the time at which the P.O has got saved , is there any table where i can find the time ???
Or any other option available to see the time ????
REgards
Rakesh

Hi,
if you have version management activated then you can get this information when the PO is created with version 0.
if not then goto CDHDR table and give the object value as your PO no. and check for the utime and udate for the PO with tcode me21n.
regards,
Adwait Bachuwar

Similar Messages

  • An internal error occurred while writing imported graphics in this document. The file has been saved

    An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
    How do i fix this, there are no images in the document
    thanks
    emma

    We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
    To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

  • I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

  • I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

    i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

    EExactly what settings are you using. Some go to iTunes.

  • How can I keep the links between pages in a PDF file after the file has been saved?

    My accounting department has just starting using Adobe Acrobat XI Standard to make our account reconciliations.  I like that we can create links between one page and the next, so that we can show our supervisor where the account balances tie to the supporting documentation.  But I have noticed the links disappear after my supervisor reviews and signs the PDF file.  Is there a way we can keep the links after it is signed?  Please note that we are not using EchoSign, just the “place signature” function in Acrobat.

    When a document is signed, the signer has the option of locking the document. The links won't be active if the document is locked, so to avoid this, instruct the signer not to lock when signing.

  • How to find out the last date & time on which a program has been run

    Hi Experts,
    Can anybody tell how to find out the last date on which a purticular program has been run.
    Valuable answers will be rewarded.
    Thanks & Regards,
    Satish.

    Hi!
    Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
    I planned once to download it weekly, but it was not so important...
    Regards
    Tamá

  • Is there a way to enable the PDF filename to be saved over (replaced) after the document has been saved once?

    Once a person has saved a fillable PDF onto their computer and entered information, closed the document, then reopens to add more information, they get an error message from Adobe Reader saying, "The document could not be saved.  Cannot save to this filename.  Please save the document with a different name or in a different folder."  The machines in question use the Windows platform.

    We have encountered the same problem at our company, and the following thread help us to resolve our problem:
    Thanks to KevinCur.
    Error while saving a .PDF File to a mapped drive
    "It has to do with Protected Mode being turned on.  I don't know if it was off by default & now it is on with the update but turning it off changes Adobe Reader's behavior back to what the users expect - a prompt warning you if you want to overwrite the existing file & then selecting Yes to overwrite.
    To disable Protected Mode:
    Start Adobe Reader
    Edit - Preferences - Security (Enhanced)
    Uncheck Enable Protected Mode at Startup
    Close Preferences & Close Reader"
    We unchecked the "Enable Protected Mode at startup" box --> Yes --> OK.  Our users are happy now.  ^_^

  • Whether the fields of a single row in an internal table has got value.

    I am doing an archiving report in PS Module.
    The table RPSCO has 12 fields which represent each month.The records in the table are based on OBJNR  and YEAR
    Now i need to check for the latest year which month has some value .If any of the month  has got some value i need to take that month.
    Sample table given below.
    OBJNR           year    Month1    month2      month3    so on
    1)PR00002409  2006     0.00     0.00     664.70-     0.00 0.00     0.00     0.00     0.00     0.00                                                                      
    0.00     0.00     0.00     0.00
    2)PR00002409  2005     0.00     0.00     0.00     0.00     0.00     0.00     0.00 0.00     0.00     0.00     48.70     127.20     0.00
    In this case the output should be Month3.Because the latest year is 2006 and Month is Month3.

    Hi Susmita,
    You have to use DO VARYING option from field 3 onwards.
    Below is the sample program to check whether the field has a value or not.
    tables: rpsco.
    data: it_rpsco like rpsco occurs 0 with header line.
    data: v_wlp type rpsco-wlp00,
          v_wtp type rpsco-wtp00,
          v_pos type i.
    select * from rpsco into table it_rpsco where gjahr = '2007'.
    if lines( it_rpsco ) gt 0.
    loop at it_rpsco.
      clear v_pos.
      do 16 times varying v_wlp from it_rpsco-wlp00 next it_rpsco-wlp01
                  varying v_wtp from it_rpsco-wtp00 next it_rpsco-wtp01.
       v_pos = v_pos + 1.
       if not v_wlp is initial.
         write:/5 v_pos , 35 v_wlp, 70 v_wtp.
         exit.
       endif.
      enddo.
    endloop.
    endif.
    Regards,
    Kumar Bandanadham
    Edited by: Velangini Showry Maria Kumar Bandanadham on Jun 1, 2009 9:30 AM

  • Error - The user has no workflow Linkage. Configure workflow.

    Hi All,
    I am getting following error in  transaction Users_gen.
    <i><b>'The user has no workflow linkage. Configure workflow'.</b></i>
    SAP note says, I need to run transaction BBP_CHECK_USERS and select repair level 2. I followed these instructions but still I am getting this error.
    Any idea to resolve this.
    Plese advice.
    Thanks and Regards
    Pras Durafe

    Hi Pras,
    you can get rid of this message: nothing important.
    It just checks that the user has got a WF relationship: i.e. that there is a manager with the red hat in the org unit.
    It should be a warning message, raised after a call of RH_GET_LEADING_POSITION during user check (BBPU_CHECK_EBP_USER), that should retrieves the user's manager.
    If you display the long text of the error message, you should get:
    <b>Short Text</b>
    The user & has no workflow linkage. Configure workflow.
    <b>Diagnosis</b>
    The user has no workflow linkage. The relationship between position (S) and user (US) does not exist.
    <b>System response</b>
    In workflow configuration (table T77S0) you can set the indicator WFLOW/CRMUS to 'X'.
    <b>Procedure</b>
    You can set the indicator as follows:
    1. Start transaction code SM30
    2. Open table T77S0 (Maintain).
    3. Create the following new entry:
    Group: WFLOW
    Semantic ID: CRMUS
    4. Activate by setting the indicator to 'X'.
    Important: This function is only available from Basis Release 6.1.
    If you set an entry in T77S0 with WFLOW/CRMUS --> X, then this control is by-passed.
    This control is brought by note 796742:
    SRM 3.0 SP10
    SRM 4.0 SP05
    For one of my customers, I deleted this message, but I don't remember if I changed the code or if I changed the table entry...
    Rgds
    Christophe
    PS: please reward points for helpfull answers

  • Has got an IP but is still not associated

    Hello all,
    I've four devices in my lab environment:
    1x WLC 2112
    1x AIR-LAP1252
    1x C3550
    1x C3524XL
    The C3500 is in the middle,
    directly connected with the WLC and the C3524XL. Each of them in a trunk.
    The AP is conected to the C3524XL.
    My problem:
    The AP has got an IP from the DHCP server who is running on the C3350.
    So I can ping every device, also the WLC/AP from a PC which is directly connected to the C3550. I also can ping the AP from the WLC.
    But, the AP is still not associated.
    I can't find the AP, also not when I try to add the AP by the MAC-address.
    Please can somebody help me to find my mistake ?

    Hi Harry,
    Just do the following:
    AP>enable
    AP#lwapp ap controller ip address
    You need to be in enable mode and NOT configuration mode. Your AP should be running the LWAPP Recovery (aka RCV) image.
    Hope this helps.

  • Regarding the BADI ME_REQ_POSTED after saving the tcode ME51N

    Hi,
    Currenlty i am using the badi ME_REQ_POSTED to update the header texts in ME51N while creating the PR.
    I am getting the PR number through IM_EBAN.
    My issue is that i have written the code in the badi to pass the input of that PR number in table RSDBS to get the reservation number.
    But once the transaction ME51N got saved, then only the table RSDBS is getting updated with the generated PR number.
    Is there any way to get updates of the table RSDBS before the transaction got saved.
    Please let me know if my question is not clear.
    Thanks & Regards.
    Prabu

    Hi,
    I don't think this is possible functionally? To achieve this, you need to modify the std code.
    Regards,
    Raj

  • My Time Capsule has stopped backing up.  I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

    My Time Capsule has stopped backing up.
    I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
    "The backup was not performed because an error occurred while copying files to the backup disk."
    I have gone into Mac Help and followed this down to stage 4:
    under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily.  Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
    I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ?  How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD.  It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
    Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go.  What is my computer's name?
    Please someone help!  I'm completely stumped.
    Thanks,
    Maggie
    Mac Help says:
    If you back up to a Time Capsule or network disk:
    Open the Time Machine pane of System Preferences, and slide the switch to Off.
    Open Time Machine preferences
    Open Disk Utility, which is in the Utilities folder in the Applications folder. 
    Open Disk Utility
    Make sure the Time Capsule or network disk is turned on and available. 
    Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password. 
    On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes. 
    Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

    Hello,
    Thanks to the great Pondini...
    http://pondini.org/TM/C3.html

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed.  Is there an adapter available so that I can use it?

    I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed.  Is there an adapter available so that I can use it?

    Welcome to the Apple Support Communities
    Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

  • I have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

    i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

    Janieburmy,
    You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
    So, let's try the filter experiment.
    On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
    Find the heading HKEYLOCALMACHINE. Click on it.
    Find the heading SYSTEM inside it. Click on it.
    Find the heading CurrentControlSet. Click
    Find the heading Control. Click
    Find the heading Class. Click
    Find the heading that begins {4D36E965- Click
    Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
    Delete the key named LowerFilter.
    Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
    Then reboot, and see what iTunes does.
    To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
    I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
    To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

Maybe you are looking for