The time for the 2.1 release...

Do they generally release it at a set time? (for instance, midnight eastern) I'd love to be among the first to download it, but I'm guessing they will release it at a random time during the day tomorrow to avoid server overloads.
Anyone know what the SOP is for Apple's update releases?

eyephownman wrote:
Do they generally release it at a set time? (for instance, midnight eastern) I'd love to be among the first to download it, but I'm guessing they will release it at a random time during the day tomorrow to avoid server overloads.
Anyone know what the SOP is for Apple's update releases?
no
Message was edited by: Mac Pro 8core - x86

Similar Messages

  • I've been using iMovie for a while now to make movies out of mostly travel photos and video clips.  I try to vary the time for the photos from 1-4 sec.  Any ideas out there?

    I've been using iMovie for a while now to make movies out of mostly travel photos and video clips.  I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short.  A friend of mine who saw my most recent product said that this is too short.  Any ideas out there?

    I apologize for my confusion on your question.  I find that depending on the principal of each photo and my target audience to determine the time frame for each photo.  It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
    If there are several things that interests the viewers in any one image, they want to look at it a second or two longer.  If the movie of images is a training aid, the images may need to be more than 3 seconds.  For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
    That was a long answer to say, generally speaking, I find 3 seconds to be an average time length.

  • Any problem leaving my MacBook on all the time for the new AppleTV?

    I now have two new AppleTVs, both of which Home Share with my one MacBook.
    Home Sharing only works when my MacBook is powered up and iTunes is running.
    Questions are...
    Is there a problem with leaving my MacBook plugged in and turned on all the time? Battery health?
    Is there any way to make iTunes Home Sharing work with the cover closed?
    Suggestions?

    I'll clarify my questions. I am using my MacBook the same way you would use a home computer, like a MacPro or a MacMini. I have it hooked to a home TV and I use a bluetooth keyboard and magic pad to operate it. It just sits next to the TV like cable box does.
    Issue #1) My MacBook is plugged in and turned on all the time, 24/7. This is not a problem for a MacPro or MacMini since neither one has a battery, so my first questions are: Will this destroy the battery's ability to maintain a charge when I do occasionally use my MacBook as a portable? Also, could this be a fire hazard since laptop batteries tend to get warm?
    Issue #2) With the cover closed, the MacBook continues to operate as long as it is receiving periodic input from the keyboard or trackpad. However, once the TV that it is connected to is turned off, the MacBook goes to sleep since it's no longer hooked to a display, either it's own (cover closed) or the TV monitor (turned off). Next question is: Is there any way to keep this MacBook and iTunes operating in this condition (turned on, but cover closed and TV monitor off) so that I can continue to HomeShare with the other AppleTVs in the house?

  • How to get rid of the "time" for the airport connection?

    Hello,
    When I connect to the wireless network at my house my Airport Symbol (top right of screen by date & time, speaker volume, etc) shows the amount of time spent on the wireless network. It shows it in day, hour, minute & second. When I connect to wireless networks outside of my home, the airport symbol is there, but with no "time" next to it.
    How do I set this up so that no "time" is showing but the airport symbol remains?
    My buddy's "time" never shows up, but when he comes to my house it does...
    I cannot seem to find the setting to remove just the time...
    Please advise.
    Thanks in advance.

    Found it... It can be changed via the drop down menu from the wireless icon in the top right part of the screen. You can get an second menu from your network name and can choose to show the time or not.

  • Why AME takes twice the time for the same conversion?

    Hi all!
    Yesterday I made a video conversion with Adobe Media Encoder CS6 and it took about half the time it is taking now...same file, same conversion, same machine, same tasks, double time...WHY???
    Thank you in advance.

    Please, help me. I need an immediate response so I could try to fix the problem because I need to use my laptop right away. Pls help.

  • Thank you devs for creating such a beautiful new iOS , this is the biggest thing since the first iPhone , it's greatly appreciated that the geniuses at apple have taken the time for the little details of things !

    Thanks for the amazing iOS it's great and smooth running it was worth the wait because you guys did GREAT and I'm very proud to own an iPhone thanks devs and CEOs!

    Thats awesome of you to say to apple. +3 internets to you for being positive

  • Capturing the time for rendering the JSFscreen.

    I have a JSF application running on WAS6.1. We have some performance issues.
    The JSF rendering is taking long time to render the page. All the database operation ie querying the database and leaving the prerender method is happening so fast.
    So how can we capture the time for the JSF components to render the page. Is there any way to do that?

    i tried to implement the phase listener.But i’m getting an error message in the JSP saying
    JSPG0046E: Unable to locate tagfile for tag phaseListener
    My action getting triggered on click of a tab. So in my JSP page I mentioned as
    <ui:tab action="#{reportsView.kpiRanking_action}" binding="#{reportsView.kpiRankingStore}"
    id false*/;&#xa;openPreloadWindow(); &#xa;document.getElementById("form1:periodTypeDropDown")[2].selected = true;&#xa;savePeriodType();"
    style="height: 25px; text-align: center; vertical-align: middle; width: 91px;cursor: pointer;" text="Store KPI Ranking">
    <f:phaseListener binding="#{reportsView.phaseListenerImpl}" type="com.capricorn.sckpi.PhaseListenerImpl"/>
    <ui:panelLayout binding="#{reportsView.layoutPanel30}" id="layoutPanel30" style="height: 335px; width: 100%; overflow-y: auto;">
    <ui:table augmentTitle="false" binding="#{reportsView.storeWithinDistrictTableStore}"
    id="storeWithinDistrictTableStore"
    style="height: 100%; left: 0px; top: 0px; position: relative; width: 100%" title="KPI Ranking">
    <ui:tableRowGroup binding="#{reportsView.storeWithinDistrictRowGroupStore}"
    id="storeWithinDistrictRowGroupStore" sourceData="#{reportsView.defaultTableDataProvider}" sourceVar="currentRow"/>
    </ui:table>
    <ui:table augmentTitle="false" binding="#{reportsView.storeWithinDistrictTableStore1}"
    id="storeWithinDistrictTableStore1"
    style="height: 100%; left: 0px; top: 0px; position: relative; width: 100%" title="YTD Ranking">
    <ui:tableRowGroup binding="#{reportsView.storeWithinDistrictRowGroupStore1}"
    id="storeWithinDistrictRowGroupStore1" sourceData="#{reportsView.defaultTableDataProvider}" sourceVar="currentRow"/>
    </ui:table>
    </ui:panelLayout>
    </ui:tab>
    My header for JSP is
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    Please help.

  • Can anyone communicate the time for SDK availability?

    Can anyone clearly tell the time for the SDK availability? May this will help others who are waiting to download the SDK.
    I came to know that, the SDK will be available from today? But still i am waiting for the link.
    Thanks,
    Thamizharasu S

    I'm waiting too..
    Did you readed this blog entry? http://blogs.sun.com/mgorshenev/entry/javafx_1_0_release
    Very interesting...
    Bruno Grossi

  • Is there a way to track the time within the clip (not sequence) that you're in?

    Let me try to explain this as best I can and make sense.
    I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere.
    However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious.
    Would like to "reset the clock" so to speak when working on individual clips within the timeline.

    Choose the edit points in the Source Monitor before inserting to the Sequence.
    You can see the duration of the In and Outs in the Monitor .

  • I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?

    I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?
    How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
    Frank

    Thanks for the info, this really helps.
    Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
    It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on  AirPort Extreme.
    The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Extreme and click Next
    Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
    You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

  • New Releases Section is the same for the last year

    As the title says the "New Releases Section" in the "Browse" all the platforms (desktop, android, web and iOS) is absolutely the same for the last year. It is never updated but why as I can clearly see my album notifications from artists I follow? Is this section a "sponsored" artists only secrion, whats the deal here? Here is a screenshot of how the section looks today 30.4.2015, notice that Rammstein which added their music almost and year ago is still occuping most of the space.

    You will not believe the response I got, I am waiting on an escalated response as what they told me is unacceptable at least for me. I will remove the Spotify support person's name as it is not his fault and I don't want to get anyone in trouble for a bug that he/she did not make: Hi ...,
    Thanks for your feedback. You mentioned that you're still seeing the same artists from last year in the New Releases section.
    Can you please try to login Spotify using these details and tell us if you're still seeing the same artists/albums?:
    Username: ...
    Password: ...
    Let us know right away if you are seeing new artists and albums. If you are, then creating a new account may be necessary.
    We'll wait for your response.
    Have a nice day, to that I responded: When I log-in with that test account the New Releases is different and is up to date. Are you serious that I need to create a new account to fix this, this is unacceptable. I WILL NOT leave my entire music library and my premium subscription history in order to fix a clear bug in your system, I am better of leaving Spotify all together. Please escalate this issue to your managers as it is again UNACEPTABLE to require me to create a new account to resolve a clear bug in your system, what is next if this gets stuck again down the road in 3 months will you ask me to create new account again, till what end. I am shocked at this. I have not idea what is happening at Spotify quarters but the last 5 months have been a pure pain, starting with the 10 000 limit of Your Music, than the 1.0 desktop version disaster and now this absurd "solution". I have been a loyal paying customer for over and year and now I feel like I wasted this time supporting a company that was not worth it. Edit: If such an issue cannot be resolve by Spotify and the only solution is to create a new account I can't even imagine what "spaghetti code" is the core implementation of their service.

  • Problem while refreshing the data for the second time using excel services in sharepoint 2013...

    Hi,
    I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
    below find the flow of refresh
    First Refresh
    On Click of refresh open the workbook with excel services and return the session id.
    Using that session I am invoking RefrehAsync method of excel services
    After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
    After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
    Now I am able to see the data
    Second Refresh
    After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
    I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
    This time my formulas are not getting calculated because of that I am not able to see the data.
    Could you please let me know that am I missing anything here?
    Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
    If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

    I am able to see the data for the second refresh  if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
    Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
    Please help me asap.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

  • How to get the values multiple times for the specified element - ABAP IXML.

    Hi all,
             i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values.  here is the sample xml,
    <View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
    <AbstractView.InboundPlugs>
    <InboundPlug name="ip2">
    <ParameterizedFeature.Parameters>
    <Parameter name="ippara2">
    <Parameter.Type>
    <Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
    </Parameter.Type>
    </Parameter>
    </ParameterizedFeature.Parameters>
    </InboundPlug>
    <InboundPlug name="hi">
    <ParameterizedFeature.Parameters>
    <Parameter name="hipara">
    <Parameter.Type>
    <Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
    </Parameter.Type>
    </Parameter>
    </ParameterizedFeature.Parameters>
    </InboundPlug>
    Here i need to store the following values in internal table, the element to get the values are,
    (1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
    The output will be of 2 records & values should be
    Inbound plug name = ip2
    Parameter name    = ippara2
    Parameter type      = binary
    2nd record
    Inbound plug name = hi
    Parameter name    = hipara
    Parameter type      = Visibility
    These 2 records should be in internal table and then i will be passing to database table...
    Can anyone provide me the code for the above......
    Thanks in advance,
    Vishnu.

    I didn't get ur requirement..
    As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
    XML ABAP  -  may b helpfull
    Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

  • TS3694 Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out.

    Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

Maybe you are looking for