The Time Limit Implementation SAP Business One Starter Package

Dear Expert,
I have read in portal SAP that SAP suggest to implement SAP Business One Starter Package with 2-10 days. Until day, i am not believe that it can do.
Can anyone give me reference about methodology implementation SAP Business One Starter Package for implementation 2-10 days ?
Thank's before to Expert who share me many experience.
Regards,
-Anggy-
Edited by: Anggi Rinaldy on Jun 23, 2011 5:08 AM

Hi Angy ,
This is not a situation to get worried about how much days it will take for starter Pack .
For a starter Package , it signifies the VANILA Implementation which is of-course possible in 2-10 days .
Even after 1 day of installation of the product with a standard SAP Chart of Account
And 4-5 Days of system initialization , you can definitely start making the Master and Start working on it.
Even if you need the more precise Answer, you should visit the below link , Which will Give you the Clear idea about the Time Consumption requires for SAP Implementation with Full Functionality.
BUT Always keep in mind that the Time may Vary as per your Requirement , which are different from SAP Standard Functionality.
https://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOneAcceleratedImplementationProgram2.0
Hope it helps
Thanks
Ashish Ranjan

Similar Messages

Approval procedures in SAP Business One starter package

Hi Experts,
Does anyone know if SAP Business One starter package supports:
1. Approval procedures
2. Drag & relate
3. Alert Management system
Thanking you in anticipation
Golden

HI
Yes it support Approval Procedures....
You can refer this link for full information:
http://www.sap-b1.com/sapbusinessone/SAP_business_one_starter_package.php

SAP Business one starter...

One compant want to become channel partner of SAP Business one starter..
How to get it?
Thanks and regards
Arun K Singh

Hi,
Check http://www12.sap.com/partners/partnerwithsap/channel/index.epx link for detailed information.
Thansk,
Neetu

The Sales Process in SAP Business One

Dear All,
In Sap Business One the normal Sales Process is Sales Quatation > Sales Order > Delivery > AR Invoice.
Now Business One allows to do Delivery without the 2 sales process of Quotation or Sales Order. It allows to make direct delivery or AR Invoice but I need a system by which I can define that a specific user cannot make a delivery or AR invoice without Sales Order or the user cannot make sales order without Sales Quotation or AR invoice cannot be made without Sales Quotation > Sales Order > Delivery.
How can the above possibilities be posible in SAP Business One 2005B.
Thanks and Regards,
Kawish

Hi Satish & Suda
Thanks for the required information. But I am getting error message when I am using in SQL and executing.
Please note that I have pasted your code as under :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(25),                     -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, <u>pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                    -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
declare @usersign int -- to get usersign of current document
declare @usercode varchar (30) -- to get usercode for the usersign
select @error = 0
select @error_message = N'Ok'
IF delivery is created without having a sales order as base document then do not allow the delivery
Object_type 15 is "Delivery Note"
IF @transaction_type = 'A' AND @object_type = '15'
BEGIN
-- get the current user sign and corresponding user code
set @usersign = (SELECT (ISNULL(T0.UserSign,-1)) FROM ODLN T0 WHERE T0.DocEntry = @list_of_cols_val_tab_del)
set @usercode = (select user_code from ousr where userid=@usersign)
-- validate basedocument exists or not
IF EXISTS (SELECT T0.ItemCode FROM dbo.DLN1 T0 WHERE T0.BaseType = -1 AND T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
-- validate the user (if user is manager then do not restrict)
IF @usercode 'manager'
BEGIN
set @error = 1998
set @error_message = N'Delivery Document cannot be created without Sales Order. Copy from Sales Order.'
END
END
END
-- Select the return values
select @error, @error_message
end
But I am getting the following error message while executing :
Msg 102, Level 15, State 1, Procedure SBO_SP_TransactionNotification, Line 26
Incorrect syntax near 'created'.
Msg 102, Level 15, State 1, Procedure SBO_SP_TransactionNotification, Line 39
Incorrect syntax near 'manager'.
Please note that in SAP Business One I have made user name test1 who is not a superuser and I want this user test1 to get blocked delivery note if it is not made from sales order.
Thanks and Regards,
Kawish

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Installation of SAP Business One client and required administration rights

Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product Management

Dear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Not able to install crystal reporter in SAP Business One PL 42

Hi All,
I had been using the evaluation version of crystal reports. Now when the free licensed version was launched I uninstalled the version and tried to instal the new one which I have downloaded from the portal. I have uninstalled the crystal reports runtime and the SAP crystal reports from the control panel. Now in the same process as mentioned I am installing the crystal reports again. In the ADD-ON istallation part when I am click on start the system shows the following error-
"An earlier version of crystal reports is found. Please ensure that the current installation is a higher version."
Inspite of the fact that my system showed no instance of crystal reports installed after the uninstall run by me.
Please guide me.
Edited by: debraj bhattacharyya on Nov 3, 2008 6:05 AM

The following is the Instructions Extract from "SAP_CRYSTAL_InstallInstructions.pdf":
Un-installation of previous version:
If a previous version of the Add-on exists , it is highly recommended the previous add-on be fully uninstalled before installing the new version. To uninstall the add-on, follow the 3 simple steps below.
1. Using SAP Business One Administration | Add-Ons | Add-On Administration: remove and un-register the add-on.
2. Log off SAP and Log back in for the un-installers to run.
3. Using Windows Control Panel | Add-Remove programs: uninstall the u201CSAP Business One Crystal Reportsu201D ( Do not un-install Crystal Run time )
Installation of New Version:
1.The Add-On runs using the compatibility licence of SAP Business One.
2.Copy the installation files to a suitable location.
3.The installation disk or folder will contain a file called SAPCrystalSetup.exe.
4.Log on to the target PC as an administrator or admin type user (windows).
5.Copy the SAPCrystalSetup.exe to a convenient location on the target PC and run SAPCrystalSetup.exe (confirm all overwrites - you may keep the CrystalDesignerPath.txt intact if the path specified is different to the defaults).
6.SAPCrystalSetup.exe will install the add-on components on the local PC. It is recommended that you keep the path selected by the installer. The default installation path for the Add-on files are C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR.
7.Locate the folder u201CDotNetFramework_3.5u201D , make sure the PC is connected to the internet and run the u201CdotNetFx35setup.exe u201C. An automatic download will occur, to get the suitable files for .Net Framework 3.5. This will take several minutes depending on the bandwidth. The installation of the .Net Framework will happen once the download finishes.
8.Locate the folder u201CCrystal_2008_Runtime_exeu201D and run the u201CCRRuntime_12_0_mlb.exeu201D. if a product ID is requested, leave the Text Box blank and proceed with install. This installs the Crystal Reports Runtime for Version 2008 on the local PC.
9.Once the setup.exe has completed, log on to SAP as manager or any other superuser.
10.Using Administration | Addons | Add-On Administration, register the Crystal Add-On, set the desired settings and restart SAP.
11.Log on to SAP, as a super user.
12.Run Account setup from Administration | Crystal Reports Administration | Account setup
13.Type in the sa password for the SQL server that holds SAP databases, and click Update. ( this process needs to be performed for each new PC, Once. )
14.Click the Create Ext tables button. Add-on will now create the additional tables (this process must be performed for each new SAP company once u2013 and can be performed from ANY PC). This creates the External SQL tables needed for the add-on.
15.THE TASKS 5, 6, 7, 8, 9, 12, 17 WILL NEED TO BE RUN ON ALL PCS THAT NEEDS THE CRSYTAL ADD-ON.
16.Crystal add-on is ready to use. A help file is provided and you may test the add-on with the sample reports found in u2026\ SAP_CR\SampleReports. The help file can be found in u2026\SAP_CR\Documents\UserHelpFile
17.If the Crystal Designer has been installed on the local PC, the following file needs to be edited ( or checked to be correct). The file gives the path to the Crystal Reports Designer exe. The add-on will read this file to launch Crystal Designer.
C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR\Resources\CrystalDesignerPath.txt

Why should we go for SAP Business One

Hi,
Can any one help me, Why should we implement SAP Business One for SME cant we go for other ERP providers.
Regards
Z Mohammed

Hi Zameer,
Every ERP package has its own advantages & disadvantages. What any company would look for before implemnting an ERP product is the adaptability factor.
A through analysis is done as to what ERP product suits the company's business processes taking various factors into consideration such as budget allocation, resources available, duration of implementation etc.
And only then a company would decide on what ERP package has to be implemented.
SAP Business One is specifically designed by SAP to suit SME businesses............as they dont have complicated business processes and dont requrie full fledged landscape such as R/3.
Note: Do Reward points for the answers you find helpful............that's how you encourage the SDN users to spend time and answer your queries.
Regards
Sai

How to Integrate SAP Business One to R/3

Hi guys,
I have one client, this client is having the one head office and two branch offices. in the Head Office SAP R/3 is implemented
Now the Client wants to implement SAP Business One in the branches. and want to integrate SAP Business One to R/3.
i.e; if in the branch office creates Purchase Order then Automatically should create the Sales Order in SAP R/3.
This is the one Scenario. their are lot of scenario's.
Thanks in advance.

Shiva,
Apologies as I am not sure what the question is. If your question is can you integrate SAP Business One with R/3 ... then yes using the SAP Business One Integration for SAP NetWeaver or B1i. You can find more detailed information on B1i on SDN here ...
SAP Business One Integration for SAP NetWeaver (B1iSN) [original link is broken]
HTH,
Eddy

SAP Business One in SAP NetWeaver Portal?

Hi,
We have a customer that will implement SAP Business One for their backoffice.
They want a package solution for their internet and extranet (clients and suppliers). The extranet will access SAP Business One.
We are considering to implement SAP NetWeaver Portal for the extranet.
Do you think this is possible? What about SSO?
Tahnk you all,
Olivier Marques.

Olivier,
I am not sure about the SAP NetWeaver Portal. You may want to ask that question in the NetWeaver Discussion Forum.
With respect to the SAP Business One Integration for SAP NetWeaver product ... this technology is not providing a portal in which to access SAP Business One from a web interface. The SAP Business One Integration for SAP NetWeaver is a technology that seamlessly integrates SAP Business One with mySAP with respect to the integration of transactions and master data flow between the two systems from a headquarters/subsidiary(s) standpoint.
HTH,
Eddy

No SAP Business One Application was found

Hi,
I have created the add-on. When i try to start the add-on it is displaying following message.
"No SAP Business One Application was found". and i am not able to start the add-on.
I have used the connection as given below. I have also declared the connection in the command line.
In the development enveiroment it is working fine. So i have generated the ard file. When i try to start the ard file it is displaying the following message "No SAP Business One Application was found".
Please let me know how can solve this problem.
Private Sub SetApplication()
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
              Try
            sConnectionString = System.Convert.ToString(Environment.GetCommandLineArgs().GetValue(1))
        Catch ex As Exception
            System.Windows.Forms.MessageBox.Show("AddOn must start in SAP Business One")
            System.Environment.Exit(0)
            Throw ex
        End Try
        Try
            SboGuiApi.Connect(sConnectionString)
        Catch ex As Exception
            System.Windows.Forms.MessageBox.Show("No SAP Business One Application was found")
            System.Environment.Exit(0)
        End Try
        SboGuiApi.AddonIdentifier = "5645523035446576656C6F706D656E743A453038373933323333343581F0D8D8C45495472FC628EF425AD5AC2AEDC411"
        SBO_Application = SboGuiApi.GetApplication(-1)
    End Sub

Dear Suresh,
You set Project->Properties->Debug->Configuration->in the drop down list selected all configurations. And in the Start option ->Command line "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056".
and
Your coding as below:
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Dim StrConn
Try
    SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString =System.Convert.ToString(Environment.GetCommandLineArgs().GetValue(1))
    SboGuiApi.Connect(System.Convert.ToString(sConnectionString))
    SBO_Application = SboGuiApi.GetApplication()
Catch
    System.Windows.Forms.MessageBox.Show("No SAP Business One application not found")
    System.Environment.Exit(0)
End Try
OR...................................................................................................................................................
You set Project->Properties->Debug->Configuration->in the drop down list selected all configurations. And in the Start option ->Command line "".
AND----
Your coding as below:
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Dim StrConn
Try
    SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString ="0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
    SboGuiApi.Connect(System.Convert.ToString(sConnectionString))
    SBO_Application = SboGuiApi.GetApplication()
Catch
    System.Windows.Forms.MessageBox.Show("No SAP Business One application not found")
    System.Environment.Exit(0)
End Try

How to Get Training for SAP Business One Certifications

Training paths for the C_TB1200_88 Implementation and Support Consultant certification:
Classroom Training
                                 - TB1000 Logistics (multiple languages)
                                 - TB1100 Acccounting (multiple languages)
                                 - TB1200 Implementation and Support (multiple languages)
Self Study
                                -   Product Training e-learning
                                 - Study Guide
Guided Self Study
                                 - Virtual Course for TB1000 and TB1100 combined with Product Training e-learning
A Practice Test is available for the C_TB1200_88 certification.
Training paths for the C_TB1300_88 Development Consultant certification:
Classrom training
                                - TB1300 Software Development Kit
Self Study
                                -   Development Consultant e-learning
More details can be found on the channel partner portal on the Education page for SAP Business One. Choose the Role-Based Training link.

Hello Daniel,
Don't know whether this link will help. It contain all the tables in SBO
https://websmp203.sap-ag.de/~sapidb/011000358700003984512006E.pdf
XL Reporter 2005 SP01 - Meta Data Description (valid for for SAP Business One A SP01)
Chris au st.

SAP Business One iPhone App konfigurieren...

Hallo zusammen,
Seit heute gibt es ja eine SAP-eigene iPhone-App.
Link zum APPSTORE
Dort findet man auch einen Link zur Info-Seite von SAP auf der steht:
You need to be running SAP Business One version 8.8 with a professional user license. Before you start using the app, make sure your SAP partner configures the mobility settings in SAP Business One.
Mehr aber leider nicht.
Weiß irgendjemand, wie man die Einstellung im Business One vornimmt?
Bin für jede Information dankbar!
LG Basti

Hallo zusammen,
mir ist es soeben gelungen mit meinem iPhone eine Verbindung (zumindest im Wlan-Netz )herzustellen.
Hoffe das klappt bei euch genauso.
Ich habe folgendes gemacht:
1. Beim Benutzer den Haken bei "Mobile-Benutzer" gesetzt
2. Dann die Mobilfunknummer eingetragen
3. Dann die UUID vom iPhone eingetragen (die ewig lange Nummer)
4. Dann dem Benutzer eine B1i-Lizenz zugewiesen
5. Auf dem iPhone in den Einstellungen eingetragen:
Server: <IP-Adresse>:8080 (dort musss die B1i installiert sein und laufen)
SSL hab ich ausgemacht, da deswegen eine Fehlermeldung beim Verbinden kam
Benutzercode: Benutzer aus SAP wo ich meine Mobilnummern und UUID eingetragen habe
Mobiltelefon: meine Mobilnummer
Fertig.
Dauert beim Verbinden eventuell eine gewisse Zeit aber dann funktioniert es super.
Gruß
Jacqueline

Unable to download SAP Business One 8.8

Hi All,
We were in the process of trying SAP Business One 8.8.
Unfortunately I have not been able to download the trial software.
My S User ID also happens to be the super administrator.
Please do let me know if there is an alternate link to download. The link I have been trying is https://websmp209.sap-ag.de/~sapidb/011000358700007392752004E
I believe others faced the same problem in June and it got rectified then, but I still get the same problem
when trying to download from this link https://websmp202.sap-ag.de/~sapidb/011000358700000171862009
and I get a error message "No Data Available"
Any help is appreciated
Thanks,
Divam

Hi Gordon,
Thanks for the link. Fom what I understand now is that the preview program has been closed.
The reason I was looking forward to software was to give a working demo to a prospective client.
Is it possible to get the evaluation version for SAP Business One 2007 if not 8.8 or older versions.
Thanks for your help
Divam

The Time Limit Implementation SAP Business One Starter Package

Similar Messages

Maybe you are looking for