The time of event is not correct

on icloud.com event 1:00 h give on iphone 10:00.
Thank's to answer when possible in french.

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If not then your current library is damaged.
If that's the case make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Click to view full size
OT

Similar Messages

Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

Why is the time bar in Calendar not corrected for DST?

My iPad has corrected its clock for DST, but the time bar in Calendar is still an hour out. Any ideas?

Mine is correct in the Eastern time zone, US. Have you tried any of the basic stuff? Restart, quit the app, reset the iPad?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the calendar app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

Can I print a calander without showing the times of events?

Can I print a calander without showing the times of events. Or, alternatively, is there a way to list things without having them be an event. Just notes on the day, for instance.

It seems like a simple solution must be at hand. There is an option in the iCal Preferences (General) panel--Show event times. With this command unchecked the screen view of the month view is free of the times of day, but when I print the month view the times of day are printed.

System error 86 has occurred. The specified network password is not correct. - despite the NTLMv2 fix

After the Windows 2008 R2 64 bit server got below 2 updates a network share is no longer available. And trying to remap it with correct credentials (that work on a Windows 8.1 64 bit) gives this error: "System error 86 has occurred. The specified network
password is not correct."
Local Policies -> Security Options -> Network Security: LAN Manager Authentication Level
is already set to "LM and NTLM - use NTLMV2 session security if negotiated"
In fact this is how it was working earlier. And it hasn't been changed.
Below 2 updates were installed in past few days:
Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.185.3528.0)
Update for Windows (KB974405)

Hi,
Does the network share a DFS share? If so, please install the hotfix below to check the results.
You cannot access a DFS share by using a valid user account in Windows Server 2008 R2, in Windows 7, in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2549311
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My Time capsule location is not correct. It thinks it is in Alabama.

My Time Capsule location is not correct. It thinks it is in Alabama. It is in Tennessee.

Was the Time Capsule or your Mac ever located in Alabama?
Where are your ISP offices located?
Have you tried resetting the Time Capsule back to factory default settings and then setting it up again? If yes, it may take Apple's location services servers 4-6 weeks to pick up the new location.

Sync Failure - The following recurring event could not be synced

Hello from Olympic London,
My 9900 T-mobile (software 7.1.0 bundle 1149) and Desktop (7.1.0.32) are giving me hassle. When trying to sync Outlook I get Synchronisation Error - The following recurring event could not be synced: 01/01/1900 - HGT Band Practice. Remove the event and sync again. In the settings, I asked it to sync only future events. I OK'd the message but it recurs each time.I have deleted the recurring event from both BB and PC.
Sorry if this is an FAQ. I have searched for it.
Please be nice to the newbie!
Edward

I have the same problem on my Torch 9810 using AT&T. Not only has the event been deleted from both Outlook and the device, but it is also from March, more than the 3 months old most events are kept, and Outlook is also set to only sync future events. No future dates are now syncing at all. Someone please help!

The specified network password is not correct.

But indeed, IT IS CORRECT. I just installed Windows 7 RC for evaluation. So far, I have NOT been able to connect to any domains. I am logged into the machine as the administrator......found out how to do that. When I try to map a network drive, using Reconnect at logon, and Connect using different credentials, I keep getting the "specified network password is not correct". I have used several other "working accounts" with the "correct passwords" of each of them, and it's always the same thing!! This is frustrating!! I will NOT....EVER....go to Vista or Windows 7 unless Microsoft makes a way for problems like this to be "not quite so problematic". I've NEVER had a problem mapping anything with Windows XP. It's not a wonder that people want to buy new machines with XP professional on them. I have another machine with Vista Home Premium on it, and I tried to just format it and install XP instead, and it blue screens every time. I can't STAND Vista or 7 RC so far. Somebody else MUST have had to deal with this mapping problem. Any help from any of you experts? If I can make this mapping thing work, there MAY be a chance for Windows in the future.
Thanks!
Frustrated to the max.

You aren't going to believe this but the problem still exists in windows-8...I made the date in windows 8 match the date on my server and I was able to connect.
Thank you microsoft for wasting over 3 hours of my time!
Charlie Elliott
It's not really a problem, it's a security feature. Kerberos only allows a 5 minute difference by default.
http://technet.microsoft.com/en-us/library/cc779260%28v=WS.10%29.aspx
Don't retire TechNet! -
(Maybe there's still a chance for hope, over 11,925+ strong and growing)

How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

If the size of the iPhone backup is putting you over the edge you have bigger problems than just this backup. You really need to solve the fundamental problem of your C: partition being too small. Even if you could solve the iPhone problem something else will come up soon that will again challenge your disk space. New drives can be had for well under $100, and even a 500 GB drive is only a little more than $100. This would be a good time to upgrade. You can even clone your current drive AND increase the partition size in one step with disk imaging software such as Acronis True Image.

TS1424 i downloaded a song and it shows the time length all to be correct but while playing the song will only play for about 30 seconds then skip to the next song in my list (all lists) - in short i payed for a song that is only of a preview quality

i downloaded a song and it shows the time length all to be correct but while playing the song will only play for about 30 seconds then skip to the next song in my list (all lists) - in short i payed for a song that is only of a preview quality
Either this needs to get fixed or i will request my money back because i will not work for my money while other lie about what i spend it on.

Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

I am using usb/my keyboard to record an original song. I play the melody on my keyboard but the rhythmic notation shown is not correct. i.e. a dotted 8th and 16th pattern has rests, 32 notes,etc. and most is incorrect. Any thoughts on how to fix this?

I am using usb/my keyboard to record an original song. I play the melody on my keyboard but the rhythmic notation shown is not correct. i.e. a dotted 8th and 16th pattern has rests, 32 notes,etc. and most is incorrect. Any thoughts on how to fix this?

What is your GarageBand version? Are you using the most recent GarageBand 10.0.x or an earlier version?
I play the melody on my keyboard but the rhythmic notation shown is not correct. i.e. a dotted 8th and 16th pattern has rests, 32 notes,etc. and most is incorrect. Any thoughts on how to fix this?
The rhythmic notation in GarageBand is the best estimate, based on the length of the notes you played and the "quantize" settings. You can correct the score somewhat by adjusting the note values in the Piano Roll view and by selecting notes and picking a suitable time quantize setting in the track editor, e.g., if you wanted to play triplets, set the quantize value correspondingly:
But I never could get GarageBand to show the dotted notes and rests correctly.
If your main goal is to create a musical score and not to mix music, better use notation software instead of GarageBand.

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Why am I being charged data usage during the times my phone is not being used?

I got a notice on my phone that my number has used all of its allowed data usage for the month. I looked at my current usage and seen that I was being charged for data usage during the times that I am not using my phone. I figured it up and it adds up to be more than the amount that you say I am over. Explain please.

Ok, what all should I turn off on my 5s and I should get any additional fees waived. I just got this new phone about a week before Thanksgiving and never got a notice till it was full. I have never went over before. I also have never been told that I could be charged data even if I am not using my phone and I should make these changes to prevent this.
Also, the phone was 2 days late getting to me. So in addition to any additional fees that I may occur from the overage I should get a credit for the delay in my phone being sent. Oh, and it probably would have been longer had I not called to see where it was at, which the guy that helped me put in the order and was to follow up the next day with a phone call to let me know what the status was and never did.

The time machine Icon does not does not show up in my menu bar

The time machine icon does not appear in my menu bar. The desk top icon for the external hard drive is green. I've checked preferances and the time machine is turned on and the box is checked that has the icon appear in my menu. I've turned off the time machine and rebooted and then turned it on and rebooted again. Nothing seems to work. I'm running Mavericks and I have an Intel I5 processor.

the box is checked that has the icon appear in my menu
Uncheck it and check it again. Any change? If not, see below.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

The time of event is not correct

Similar Messages

Maybe you are looking for