The timeline and cursor move very jerky (in a continual chattery motion) in Windows 8.1
in my project the timeline and/or the cursor move very jerky (in a continual chattery motion ) in windows 8.1
i have set the Windows Software Compatibility setting for their "Window 7 emulator" and the condition still persists.
also the "fullscreen playback" for the project used to be very fine resolution and now it is very mushy...
all this tells me there are real problem with my Premier Element 10
Littlefeather
You are running Premiere Elements 10 on Windows 8.1 64 bit. The program works just fine in Windows 8.1 64 bit when run Windows 8.1.
So do not go altering to another operating system. I know this first hand.
The immediate factor that needs ruling in or out is your video card/graphics card. Specifically "Does your Windows 8.1 64 bit use
a NVIDIA GeForce card? If so, that may be your answer. See Announcement at the top of this forum which describe the Premiere
Elements 10 NVIDIA GeForce problem and gives the fix of how to roll back the card's driver version to get Premiere Elements 10
to work for you.
Once we are assured that you are not afflicted by Premiere Elements 10 NVIDIA GeForce syndrome and also know that your current
video card/graphics card driver is up to date, then we can move on to seek other factors that may be causing the problem.
For your convenience, the following is a copy/paste of the Announcement about the issue as it appears at the top of this forum.
All the links and how tos that you will need are in this announcement.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches
specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then
the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The
typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA
nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please do not hesitate to ask if you need clarification on any of this information.
We will be watching for your reply.
Thank you.
ATR
Similar Messages
-
Text created in Premiere showing other text files in the timeline and exports.
Hi,
I'm creating slates with text generated in Premiere. For each new slate I am duplicating a text layer, Option + Dragging the duplicate file over the text I'd like to replace, then opening the new text layer in the text editor and updating the information.
Things seem fine at first and then randomly text layers in the timeline will show text from other files in the timeline. If I open the text file up in the text editor I see the correct info but not in the timeline.
The only fix I have found is to delete render files, move the text layer around in the timeline, quit and re-open. But still, sometimes when I export, the export preview window will show the wrong text and when I export the file I create shows the wrong text as well.
It seems like Premiere is getting confused by multiple text files in the timeline and is pointing to the wrong cache files.
Thoughts would be a huge help!Thanks for the tip Kevin. Anything I can do to avoid this in the future?
I've had this happen on a number of projects. My media and project files are on a SAN, cache and previews are local.
Thanks,
Mike Brown
P: (401) 743-7452 -
(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
(2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
Thanks
SamTidyCup
What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
or
with your mouse cursor draw a rectangle around the clips that you want to select
2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
Are you asking about photos with landscape or portrait orientation?
The pan and zoom tool does one photo at a time.
Have you read the Adobe documentation on the Pan and Zoom Tool?
http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
Please review and clarify and then we can get into greater details on this.
Thanks.
ATR -
Display metadata instead of clip name on the clips in the timeline and in the source monitor
Is there a way to display metadata instead of clip name on the clips in the timeline and in the source monitor? Clip names are usually set by the camera and are of no use to me. What i would like the clip and the source monitor to display is the name of the shot from the metadata. That's,in my opinion, a very useful info when you're editing a film. If that feature doesn't exist, is there a way to batch rename clips based on metadata?
thanks
is that new or was that always there. Not to sure if I have tried that in the past
anyway it helped and will makes things much faster
one other question maybe you have an answer to that too. it seems both Audio tracks are independ when putting on keyframes is there a way when using keyframes in the time line that it affect both channels of audio for example a1 an a2
once again thanks for your help -
General Error; failed to render the timeline and failed to export HD mpg2
I have searched for the posts if there is same issue I'm having on the forum, and it seems it's similar yet not really...
So I decided to post one.
I have 2100 sequential frames in jpgs. (each jpg size is 1280x720)
I open "image sequence" in QT 7.04 with 29.97 fps, then save it as MOV in external HD with firewire.
Then I import it into FCP 5.04 on Timeline.
Timeline setting is
Frame Size : 1280x720 HDTV 720P (16:9)
Pixel Aspect Ratio : Square uncheck Anamorphic 16:9
Filed Dominance : None
Editing Timebase : 29.97
Quick time Vieo Setting : Compressor -DVCPRO HD 720P60 Quality 100%
After I place the mov file on the timeline, the Red Bar shows up.
I tried to render the timeline, it will only try to render to 3% and stop, and "general error" pops up.
I tried to use Compressor 2.01 with HD mpg2 preset to export out as HD mpg2 format, and it will fail to export.
After I read several posts on here, I was wondering I might have corrupted mov...
I re-create MOV file from QT and import in FCP5 and do the same... but I still get the same error...
I tried to re-start computer and tried, no luck..
Then I was wondering maybe some of the jpgs is corrupted...
I'm not sure how to check which jpg file is corrputed since there is 2100 frames in directory.
It is able to show all jpgs as thumbnail images..
So my questions here.. are...
If I do anything wrong during the step?
If not... what's wrong? why i can't render the timeline, and why i can't export to HD?
Or if there is a "way" to figure out what file is corrupted..?
This is not first time I have the same problem, I even tried to test out with 10,000 jpgs frames and create mov ... and import in FCP5..etc...
I had no problem with render and export... so I don't think it's the "HD length" issue...
If anyone have the same issue or know what's wrong... please help!!!
Thank you,I downloaded iview Media pro free trial version to catalog the image to see if there is any corrupted jpgs.
Unfortunately, it didn't find any corrupted jpgs.
I also tried to change the sequence setting, under "QuickTime Video Setting" from "DVCPRO HD 720p60" to "HDV 720p30" (since I found out the frame size for DVCPRO HD 720p60 is 960x720 with 59.99 fps).
The result I get after I placed mov on timeline, it used to give red bar, it gave me orange bar... which made me be able to render the timeline without problem.
However, Compressor still is not able to export HD mpg2.
Then I changed QuickTime Video Setting from HDV 720p30 to "photo-jpg", the bar is now grey, but still not able to export to HD mpg2.
now I don't really don't know what's going on.
anyone can suggest me what else I can try and see...?? -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
I just purchased a ipad 2 and have not sync it yet. I have an old pc and would like to move the itunes library account to a newer pc that I have. Can I move the library to the ipad and sync ipods to the ipad and/or move the library to the new pc?
Perhaps this web page will help: http://support.apple.com/kb/ht1229
But I must point out that leaving the iPhoto Library on the external is worth considering. Your internal drive would be better off without having to carry the photos.
When you booted with the external connected and you were asked for the library, did you try navigating to the Library in on the external drive? -
In an HDV sequence can I "scrub" the timeline and record it via FW to tape?
In an HDV sequence can I "scrub" the timeline and record it via FW to tape?
In standard definition I used to be able to do this via Firewire to my mini-dv deck. But now I am working with the Canon Vixia30, an HDV camera. I'd like to be able to scrub the time line back and forth at varying speeds and record this scrubbing live (rather than doing it with Motion software.) Is there anyway to "record" this action, either onto tape or digitally, while maintaining the HD resolution?
If possible I'd like to figure out how to do this without buying extra equipment. I understand I could get a Matrox MO2 Mini box ($450.) to output the live HD signal, but then how to record the HD signal from the Matrox box? (my camera only has HDMI out, not in.)
Thank you for your input.And if you capture your footage as ProRes (as I see discussed in another thread), you cannot output to HDV via firewire. It would be pointless. To go from a lossy format to ProRes to edit...then convert back to HDV. Typically people who shoot HDv never master back to HDV, as it isn't a mastering format.
And yes, the MAX is totally worth it. Compression times faster than RT (meaning less time to compress than the timeline is long...I did 90 min timeline in 75 min yesterday). Worth it? Depends how much your time is worth. TO me, I'd like to have the compression done in 75 minutes opposed to 3-4 hours.
Shane -
i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you
Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I am moving clips to the timeline and they arrive zoomed in. how can I stop this?
need some help. I'm moving clips to the timeline and they arrive zoomed in. I don't want this effect. How can I stop it?
To expand a little on John's questions and link, every clip and every sequence has its own frame dimensions (and pixel aspect ratio & frame rate). By default, Premiere preserves the dimensions (or "resolution") of a clip when you add it to a sequence. That means that if a clip's resolution is greater than that of the sequence, it will appear to be zoomed in on the frame. Conversely, if the clip is lower res than the sequence, it will appear shrunk, with black borders.
If all of your content is the same resolution (which is the ideal case), then you should use a sequence that matches. The easiest way to do so is the "New Item" method that John refers to--dragging a clip to the Project Panel's New Item button--or, in later releases of PPro CC, dragging it into an empty Timeline panel. If you're working with content of mixed resolution, then you have to pick your poison and scale smaller clips up or larger clips down. The latter option is generally preferred because the former--scaling clips up--often results in unacceptable pixelation. -
This is a silly question but how do you close the angle editor in the timeline and go back to my master multicam clip for editing? I'm having a brain **** right now...
Never mind...found the cure Command-{ ...thanks to a TWolfsky thread...
-
CS4 hangs in the timeline and the program window
This is going to be a difficult post since I'm not sure how to articulate the problem.
To begin - I have been using Premier for many years, so I don't believe my difficulties are the result of being a newbie.
I installed CS4 a few months ago, but have been heavily involved with project using CS3 and therefore have not fired up CS4 until recently. The problem is that after placing my clips on the timeline I can scrub and play them. Once I begin to make edits however, I scrub along the timeline and nothing happens - I don't see any visual changes in the monitor.
If I wait a while then the functionality comes back (but only for a few moments) and then everything freezes again.
This is really frustrating. So much so that I have gone back to usign CS3 since it actually works.
I don't know how to fix this problem, nor do I know if others have the same problem.
Any help will be appreciated.Some troubleshooting tips.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
When I put in a scroll in fcx, I get a single frame of the scroll flashing on the screen about a second or two before the scroll appears. There is nothing on the timeline and this only appears on the quicktime or dvd. Any thoughts?
'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit) -
Before the 10.0.3 update, you could drag the region further into the timeline and it would automatically create silence before the track plays when you export it. What am I missing? How do I i do this in the current version of Garage band?
what is the problem? Can't you drag the audio region to the right, or is the silence at the beginning of the track missing?
You could mark the measures you want to export by the Cycle region. Then any beginning silence will be included.
Maybe you are looking for
-
I have installed oracle 8.0.5 on Redhat 6.1 but i am not able to create a database . Can anyone guide me on that. When I try connecting through internal it says not enough privileges. This error is there when I log in with any user. My email is [emai
-
How do I send invite to same person on different mails
Hi, I need to send out invitations for an event. I add people in calendar through "Invitees". Problem is that I need to invite some people twice or three times using different addresses i.e. [email protected] + [email protected] + [email protected] A
-
Playing music in car and using phone
Sorry if this thread exists, I was not able to find it Currently using AUX for iphone music playback in my car but have to unplug it when using the phone. What's the best way for me to be able to play music in the car and be able to use the phone wit
-
Where can i get hard drive cable?
i've hand one on back order for two months with two different retailers who both say Apple has them on back order. i dont want a used part because i understand now that they tend to fail. 2009-2010 unibody macpro hard drive and sensor cable. Any id
-
ESENT 490 error in Event Viewer
Need some help with a new error I am getting since loading Win 8.1. In the Event Viewer it is listed as a ESENT 490 error. svchost (1500) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRUDB.dat" for read / write access failed with syst