The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.
Once in a while i get the error
Event ID 6463
The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.
This also happens when i restart the timer service.
I already cleared the SharePoint cache (xml's) but no success with that.
Environment is
SharePoint 2013 SP1 + CU Dec 2014
This is a brand new SP13 with SP1 installation after binaries installation i also installed Dec 2014 CU and then created the SP farm.
The Apppool/Timer account is member of WSS_ADMIN_WPG.
Issue can be reproduced with restarting SharePoint Timer Service.
Hereby the Process Monitor output. Hence i filtered it on NOT SUCCESS and Path contains the word UPGRADE
11:37:57,4244851 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\UpgradeLogLevelOverride
NAME NOT FOUND Length: 144
11:37:57,6632057 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,6632889 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7140763 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7141089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313403 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:59,2026527 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:37:59,2109400 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3534303 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3537846 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3594290 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3597316 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3653094 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3656118 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
Similar Messages
-
I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1". -
resieving all the time this text ... with ipad iphone ???
have newes software 10.7.2 and news itunes 10.5
this device isn't eligible for the requested build
what can i do ????Can you get a Wi-Fi connection on your iPhone?
I got an Internet connection on my phone, went to SETTINGS --> GENERAL --> SOFTWARE UPDATE and updated my Software wirelessly (no iTunes involved).
When I connected my phone to my Computer again and iTunes popped up, it showed that my iPhone software was up to date. Then I could restore to an old back-up. -
Exception: Cannot read target memory. PL AXI slave ports access is not allowed
Hi There,
I am having some issues debugging with the SDK tool for a Vivado project. I have no issues using the plan ahead version of the project, but when I try to use the SDK on a project exported by Vivado, I am unable to read memory and get the message above.
Are there any settings I need to set to allow access to this memory.
The AXI Lite slave is located ate 0x43c0000 in memory.
Regards
Walter
Taking this one step further,
This basic C code writes values to a C structure containing 4 32 bit registers.
* Copyright (c) 2009-2012 Xilinx, Inc. All rights reserved.
* Xilinx, Inc.
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR
* STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION
* IS FREE FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE
* FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO
* ANY WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE
* FROM CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE.
* helloworld.c: simple test application
* This application configures UART 16550 to baud rate 9600.
* PS7 UART (Zynq) is not initialized by this application, since
* bootrom/bsp configures it to baud rate 115200
* | UART TYPE BAUD RATE |
* uartns550 9600
* uartlite Configurable only in HW design
* ps7_uart 115200 (configured by bootrom/bsp)
#include <stdio.h>
#include "platform.h"
#include "xparameters.h"
void print(char *str);
typedef struct {
unsigned int reg0;
unsigned int reg1;
unsigned int reg2;
unsigned int reg3;
} REGMAP;
int main()
REGMAP *regPtr;
unsigned int readReg[4] = {0,0,0,0};
init_platform();
print("AXI4 Lite Test Program\n\r");
regPtr = (REGMAP*)XPAR_AXI_LITE_SLAVE_1_BASEADDR;
regPtr->reg0 = 0x1234567;
regPtr->reg1 = 0x01010101;
regPtr->reg2 = 0x02020202;
regPtr->reg3 = 0x03030303;
readReg[0] = regPtr->reg0;
readReg[1] = regPtr->reg1;
readReg[2] = regPtr->reg2;
readReg[3] = regPtr->reg3;
return 0;
The values in the readReg array are as programmed, but I can't see the contents of structure in the watch window.
I think it may be because it is an AXI4 Lite implmentation.
Regards
Walter -
Is the Time Machine capable of logging websites for the admin to see?
What I mean is, if I were to log in to someone's network when it's a time machine, will they be able to track what websites I been on easily or would they have to do a little bit of hacking to figure out? I prefer my privacy when I want to briefly use someone else's network when mine is down and I noticed my neighbor seems to have one.
Not as long as the browser is on your computer. Time Machine is a backup utility, not a web activity monitor; it will back up Safari's history file if it's on a disk it's backing up, and other browsers work similarly.
Note that they might find out what you've been visiting through their router.
(55485) -
How to check for the sub folder in the document library Is already Exist using CSOM?
Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
</Eq>
</Where>
</Query>
</View>",
@"/sites/test/hcl/"
+ InputFolderName);
Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
context.Load(listItems);
context.ExecuteQuery();
if (listItems.Count > 0)
retStatus =
true.ToString();
else
retStatus =
false.ToString();
catch (Exception ex)
retStatus =
"X02";
return retStatus;
thanks
SundharHi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support -
Regular expression: check for the presence of special characters.
I have the following requirement:
I need to check for the presence of the following characters in a keyword: @, #, > if any of these characters are present, then they need to be stripped off, before going further. Please let me know the regular expression to check for these characters.I am trying to extend the same logic for the following characters:
.,?!@#%^&*()-~<>[]{}\+=`©® . here is the code fragment:
Pattern kValidator = Pattern.compile("[\\.,\\\\?!@#%^&*()-~<>[]{}\\+=\\`©®]");
Matcher kMatcher = kValidator.matcher(keyWord);
if (kMatcher.find(0)) {
keyWord = keyWord.replaceAll("[.,\\\\?!@#%^&*()-~<>[]{}\\+=\\`©®]", " ");
}I get the following error. This error is from the weblogic command window. I dont understand these special characters.
Error:
28 Oct 2008 12:27:48 | INFO | SearchController | Exception while fetching search results in controller:Unclosed character class near index
39
[\.,\‘\“?!@#%^&*()-~<>[]{}\+=\`©®]
^
java.util.regex.PatternSyntaxException: Unclosed character class near index 39
[\.,\‘\“?!@#%^&*()-~<>[]{}\+=\`©®]
^
at java.util.regex.Pattern.error(Pattern.java:1650)
at java.util.regex.Pattern.clazz(Pattern.java:2199)
at java.util.regex.Pattern.sequence(Pattern.java:1727)
at java.util.regex.Pattern.expr(Pattern.java:1687)
at java.util.regex.Pattern.compile(Pattern.java:1397)
at java.util.regex.Pattern.<init>(Pattern.java:1124)
at java.util.regex.Pattern.compile(Pattern.java:817) -
BO 4.0 Advanced Analysis for OLAP - The MDAS service encountered an error.
Hi guru's,
We are running BO 4.0 SP02 Patch 11 with SAP BW 7 and experiencing the following error with Advanced Analysis for OLAP:
"Analysis edition for OLAP
The MDAS service encountered an error."
After you click show details:
"com.crystaldecisions.thirdparty.org.omg.CORBA.MARSHAL minor code: 0x0 completed: No"
I have researched into this and found forums such as:
http://forums.sdn.sap.com/thread.jspa?threadID=2053481
SAP KB 1560100 - BI4.0 Advanced Analysis Web problem: The MDAS Service encountered an error
SAP KB 1661163 - An error is generated when selecting a query or cube in Analysis for OLAP: Error 15
However, none of these have helped our situation too much.
We have rebuilt the windows server 2008 R2 recently, hence the process we followed was a fresh install of BO 4.0 SP02 platform & tools, and then patch 11 on top of these.
Crystal, WEBI's (using the same BICS connections as the AA's) and Dashboards are all working as per expected.
The errors are for every AA including ones with only 2 variable selections (light queries) to ones with many more. Hence it is platform wide for Advanced Analysis.
I have also tried creating new AA using existing BICS, new BICS existing AA, new BICS new AA all with no luck.
We have also created new Adaptive Processing Servers with only the MDAS as a common service, turned on tracing etc but nothing springs to us as to what is going wrong.
Any ideas would be greatly appreciated?
Thanks all,Hi All,
After conversing with SAP support technicians we have found what is causing this issue.
On the windows servers we have the following installed locally:
- BO platform 4.0 SP02
- BO platform 4.0 SP02 patch 11
- BO client tools 4.0 SP02
- BO client tools 4.0 SP02 patch 11
- Crystal reports 2011 SP02
- Crystal reports 2011 SP02 patch 11
- Crystal reports for Ent SP02
- Crystal reports for Ent SP02 patch 11
It seems that the crystal reports 2011 or cr for Ent was causing an issue in the .WAR files that BOE uses to run Advanced Analysis for OLAP.
After uninstalling the two crystal products and removing any left over cr files in program files on the server, AA for OLAP works successfully in our environment.
The other point after this was i stopped the tomcat and SIA, i renamed the BOE folder under <install dir>\SAP BO4.0\Tomcat6\webapps and restarted the tomcat and then the SIA. In 4.0 when the tomcat is started again it will go and recreate the BOE folder from the BO directories effectively recreating the apps .WAR files under the webapps\BOE folder.
SAP will hopefully document this issue for other clients.
Cheers, -
I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
at System.Data.SqlClient.SqlConnection..ctor()
at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
at System.Diagnostics.TraceSource.TraceInformation(String message)
at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
<serviceAuthorization impersonateCallerForAllOperations="true"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="FRB.AllowImpersonate">
<clientCredentials>
<windows allowedImpersonationLevel="Impersonation"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<wsHttpBinding>
<binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
allowCookies="false">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<reliableSession ordered="true" inactivityTimeout="00:10:00"
enabled="false" />
<security mode="Message">
<transport clientCredentialType="Windows" proxyCredentialType="None"
realm="" />
<message clientCredentialType="Windows" negotiateServiceCredential="true"
algorithmSuite="Default" />
</security>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
name="WSHttpBinding_IAdminService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
</client>
</system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
<appSettings>
<!-- whatever goes here -->
</appSettings>
<!-- connection string section -->
<connectionStrings>
<add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
<add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
<add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
<!-- FRB.Diagnostics logging section -->
<FRB.Diagnostics>
<sqlTraceListeners>
<sqlTraceListener name="sqlTraceListenerSettings"
connectionStringName="log"
commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
commandType="Text">
<parameters>
<parameter name="@Source" propertyToken="{Source}"/>
<parameter name="@ActivityId" propertyToken="{ActivityId}"/>
<parameter name="@ProcessId" propertyToken="{ProcessId}"/>
<parameter name="@ThreadId" propertyToken="{ThreadId}"/>
<parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
<parameter name="@Message" propertyToken="{Message}"/>
<parameter name="@Timestamp" propertyToken="{DateTime}"/>
<!-- <parameter name="@UserId" propertyToken="{WindowsIdentity}"/> -->
</parameters>
</sqlTraceListener>
</sqlTraceListeners>
<smtpTraceListeners>
<smtpTraceListener name="smtpTraceListenerSettings"
host="vssmtp"
port="25"
from="[email protected]"
to="[email protected]"
subject="AdminService Logging Event: {EventType}, {MachineName}"
body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
</smtpTraceListeners>
</FRB.Diagnostics>
<!-- System.Diagnostics logging section -->
<system.diagnostics>
<sources>
<source name="FRB.EC.AdminService" switchValue="All">
<listeners>
<clear/>
<add name="ods"/>
<add name="smtp"/>
<add name="sql"/>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
<listeners>
<add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
</listeners>
</source>
</sources>
<sharedListeners>
<!-- OutputDebugStringTraceListener -->
<add name="ods"
type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
<!-- SqlTraceListener -->
<add name="sql"
type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
initializeData="sqlTraceListenerSettings"
traceOutputOptions="Timestamp"/>
<!-- SmtpTraceListener -->
<add name="smtp"
type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
initializeData="smtpTraceListenerSettings">
<filter type="System.Diagnostics.EventTypeFilter"
initializeData="Error"/>
</add>
</sharedListeners>
<trace autoflush="true"/>
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0">
</compilation>
<roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
</system.web>
<system.serviceModel>
<services>
<service name="FRB.EC.AdminService.AdminService"
behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
<!-- Service Endpoints -->
<endpoint address="" binding="wsHttpBinding"
bindingConfiguration="wsHttpEndpointBinding"
contract="FRB.EC.AdminService.IAdminService">
<!--
Upon deployment, the following identity element should be removed or replaced to reflect the
identity under which the deployed service runs.
If removed, WCF will infer an appropriate identity automatically.
-->
<identity>
<dns value="localhost"/>
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="wsHttpEndpointBinding"
maxBufferPoolSize="2147483647"
maxReceivedMessageSize="500000000">
<readerQuotas maxDepth="2147483647"
maxStringContentLength="2147483647"
maxArrayLength="2147483647"
maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647"/>
<security>
<message clientCredentialType="Windows"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="FRB.EC.AdminService.AdminServiceBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and
remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true.
Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="true"/>
<serviceCredentials>
</serviceCredentials>
<!--<serviceAuthorization principalPermissionMode="UseAspNetRoles"
roleProviderName="AspNetWindowsTokenRoleProvider"/>-->
<serviceAuthorization principalPermissionMode="UseWindowsGroups"
impersonateCallerForAllOperations="true"/>
</behavior>
<behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and
remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true.
Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
<serviceCredentials>
<clientCertificate>
<authentication certificateValidationMode="PeerTrust"/>
<!--<authentication certificateValidationMode="Custom" customCertificateValidatorType="DataFactionServices.FRBX509CertificateValidator"/>-->
</clientCertificate>
<serviceCertificate findValue="WCfServer"
storeLocation="LocalMachine"
storeName="My" x509FindType="FindBySubjectName"/>
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
Thanks for any help.
NealI think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
// Above is related to the WCFLOG SQL Diagnostics Trace
// If you get error here an inner exception "requested registry access is not allowed"
// inside exception "type initializer for System.Data.SqlClient.SqlConnection"
// then make sure you have impersonation enabled in your client.
// See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
<endpointBehaviors>
<behavior name="FRB.AllowImpersonate ">
<clientCredentials>
<windows allowedImpersonationLevel="Impersonation"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
<client>
<endpoint address="http://localhost:4998/AdminService.svc"
behaviorConfiguration="FRB.AllowImpersonate"
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IAdminService"
contract="svcRef.IAdminService"
name="WSHttpBinding_IAdminService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
</client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
try
_connection = new SqlConnection(connectionString);
// Above is related to the WCFLOG SQL Diagnostics Trace
// If you get error here an inner exception "requested registry access is not allowed"
// inside exception "type initializer for System.Data.SqlClient.SqlConnection"
// then make sure you have impersonation enabled in your client.
// See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
catch (Exception ex)
if (ex.ToString().Contains("The type initializer for"))
throw new System.ApplicationException(@"
Your client app <endpoint> must be cofigured have a
'behaviorConfiguration' attribute like this:
behaviorConfiguration='FRB.AllowImpersonate'
that points back to a behavior that has this syntax:
<behavior name='FRB.AllowImpersonate'>
<clientCredentials>
<windows allowedImpersonationLevel='Impersonation'/>
</clientCredentials>
</behavior>
", ex);
else
throw ex;
_command = _connection.CreateCommand();
_command.CommandText = commandText;
_command.CommandType = commandType;
// TODO _command.CommandTimeout = ;
Neal -
Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?
Hey NicolasZen,
Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Your iPhone may have one of these symptoms:
- iPhone displays "No Service" or "Searching" in an area of good coverage
- iPhone doesn't regain service when returning to an area of coverage
Resolution
If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
2. Turn iPhone off and then on again.
3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
5. Update your iPhone to the latest version of iOS.
6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
7. Restore the iPhone.
Thanks,
Matt M. -
What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?
The workflow manager configuration wizard crashes with the below error when used a domain account (setup account with full prvilige on sql and server). It requires some specific permissions on AD ? I couldnt see any documentation stating what permission
it requires.
Can anyone help ?
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: AUTRTV22OQMI5JWSVNDSSNCH0E5DQ2L1
Problem Signature 02: 1.0.20922.0
Problem Signature 03: 505e1b30
Problem Signature 04: System.DirectoryServices.AccountManagement
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa5bda
Problem Signature 07: 3ef
Problem Signature 08: 348
Problem Signature 09: KCKGYE1NBUPA2CLDHCXJ0IFBDVSEPD1F
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1044
Additional Information 1: 8e7b
Additional Information 2: 8e7b3fcdf081688bfcdf47496694f0e4
Additional Information 3: c007
Additional Information 4: c007e99b2d5f6f723ff4e7b990b5c691
Log Name: Application
Source: Application Error
Date: 27.08.2014 11:47:54
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: OSS01-MAP-226.global.corp
Description:
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x23a0
Faulting application start time: 0x01cfc1dbe703a8ac
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 36f30eb4-2dcf-11e4-9415-005056892fae
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
<EventRecordID>7471545</EventRecordID>
<Channel>Application</Channel>
<Computer>OSS01-MAP-226.global.corp</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
<Data>1.0.20922.0</Data>
<Data>505e1b30</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.2.9200.16864</Data>
<Data>531d34d8</Data>
<Data>e0434352</Data>
<Data>0000000000047b8c</Data>
<Data>23a0</Data>
<Data>01cfc1dbe703a8ac</Data>
<Data>C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>36f30eb4-2dcf-11e4-9415-005056892fae</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Log Name: Application
Source: .NET Runtime
Date: 27.08.2014 11:47:54
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: OSS01-MAP-226.global.corp
Description:
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
<EventRecordID>7471544</EventRecordID>
<Channel>Application</Channel>
<Computer>OSS01-MAP-226.global.corp</Computer>
<Security />
</System>
<EventData>
<Data>Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>,
System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
</Data>
</EventData>
</Event>Hi Karthik,
You could refer to the series of videos below to install and configure workflow manager in SharePoint 2013:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
The Episode 2 describes the necessary account in AD with right permission in the installation process:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx#episode2
Regards,
Rebecca Tu
TechNet Community Support -
The MDAS service encountered an error.
Hi Experts,
I have a BEx Query. On this I have created an Analysis Work Space in BO. I have one system for both (Dev & QA) in BO.
The Analysis Work Space query is executing without error in BO Dev, but it is throwing below error for QA query:
The MDAS service encountered an error.
Failed to execute getRepresentation() because the query state [USER_NOT_AUTHORIZED] is invalid. : com.businessobjects.multidimensional.services.MdasRuntimeException: Failed to execute getRepresentation() because the query state [USER_NOT_AUTHORIZED] is invalid.
I have gone through so many SDN topics related to this. But couldn't get much info on this.
Note: The query doesn't have any calculation.
Please suggest.
Best Regards,
NiranjanHi Niranjan,
BW is throwing this error most probably, you might need to check bw side.
This might help you Warning eye(007) - Authorization error in webi report -
Is it possible to keep an email account on the iPhone but stop if from checking for new mail?
I have an email account that has been deleted from the provider (Gmail), but I want to keep the old mails on my phone, while stopping it from checking for new mail. Is this possible?
If I disable the account to stop if from checking for new mail (and producing a bunch of annoying pop-ups every time the mail app is opened), the account becomes invisible and the old mails disappear. I want to keep them visible to I can read and refer to them, but want to stop the phone from trying to download new ones or check the account.
Any help appreciated.Thanks for the thought. In this case, that doesn't really help much, as it requires a bunch of button pushing just to check emails. Plus, if I'm not mistaken, in addition to switching modes every time I check email, it also prevents the other accounts from downloading the most recent mails as well. Since it's possible to keep an account on a Mac computer, but take it offline, it's very disappointing if there isn't a way to do the equivalent on an iPhone so that it passively holds the mails but doesn't send constant pop-ups every time the app is accessed.
-
I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom -
can some one help me? I have been trying to update my MAC and it will not download because this message come up
(The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.)For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.
Maybe you are looking for
-
Dear All Any Standared Report available Single line Openning balance and closing Balce with values for particular date Thanks and Regards Suresh
-
Airport Card options for 1st gen iMac G5
I'm about to purchase an Airport Express wireless-N to use as my access point. I have a Fall 2004-purchased G5 iMac. The original one. Am I Airport Extreme-ready? Can I buy the Airport Extreme Card to get on the network wirelessly? The distance is wa
-
Computer Shuts Down At BitLocker Boot Password Prompt
Hi All, I have been using this computer for almost 6 months now with absolutely no problems until I encrypted my system drive with BitLocker. I am not using a TPM. Now, almost every time I get to the password prompt for BitLocker at boot, my computer
-
How to view a BI query with anonymous user in the portal
<b>Hi Gurus,</b> Does anybody knows how to view a BI query in the portal with anonymous user? Cause when i try to view a query the portal always ask for authentification. And i don't want to sign with a user cause my portal is for everybody and if th
-
I need some workflow material. plz. help me out From Raj