The title does not show up in the Program Sequence window in PP CC

I am trying to add a simple title in one of the clips of a video that I am editing. I can see the title in the title window with the clip in the background but when I play the video the playback doesn't show the title but the clip.
How can I can I solve this problem? I am using a trial version of PP CC.
Thanks

I looked at the video. I did exactly the same thing. What do you mean by "poke out the eyeball on that track"? Do you refer to the little icon on the top right corner of the title window that has an eye?
I have just done the following test: I created a colored background (green) and dragged that on the video track above my project then I added the title above this colored background on a third video track. Now the title shows up in the program window but the background is black not green. So it looks like that the title does not have a transparent background.

Similar Messages

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

HT1386 I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome

I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome

Hi lindaasw,
Welcome to the Support Communities!
Do you have the latest version of iTunes for Windows installed? I would turn on the sidebar and the menu bar just to make sure you are seeing everything. If the iPhone is still not recognized in iTunes, follow these troubleshooting steps:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy

We have a DVD in the super drive that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

We have a DVD in the super drive on our Macbook Pro that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801. Hope this helps

I have downloaded a movie with subtitle to iMovie. When playing the video, the subtitle does not show up through the entire video. It happens to my Mac Air and Mac Pro.

I have downloaded a video with subtitle. When playing the edited video, the subtitle does not show up in the entire video. The subtitle comes and goes in the video.I have tried with my Mac Pro and Mac Air, with the same result. I have downloaded movie with subtitle before and never had this problem. Please advise.

I'm not very knowledgable on this but subtitles are sometimes on a separate track from the main movie. Try opening the downloaded video in Quicktime Player and saving it - you may be asked if you want to "flatten movie". Choose to do this. The resulting movie will probably now work OK. Others may be able to supply more comprehensive instructions.
Geoff.

How do I get my photos off my phone and onto iPhoto with iOS5. The phone does not show up in the list of devices.

Now that I have upgraded iPhoto and my iPhone, when I connect my phone to the computer, the phone does not show up in iPhoto and I no longer am asked if I wasnt to import my photos. I haven't upgraded to iCloud yet.

You don't not with a crack screen.

The drop shadow or even the type does not show up on the PDF created from SC3

I've created the legends on charts and the text on path and drop shadows are applied.
when I make a PDF, some text get dropped all together as well as the drop shadows do not show up.
Can someone help to solve this?
The only way is make a jpg. files and then create a separate PDF off the Acrobat.
It works but I would like to save the steps.
Thanks!

Hello markshepherd1,
Thanks for using Apple Support Communities.
According to the following article, when you're going through the process of burning a playlist to a disc, you have the option to select "Include CD Text".
If you’re creating an audio CD, choose your options:
Change the recording speed:
Choose an option from the Preferred Speed pop-up menu.
When you burn an audio CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Change the amount of silence between songs:
Choose an option from the Gap Between Songs pop-up menu.
Have all the songs on the disc play at the same volume:
Select Use Sound Check.
Include information that disc players in some vehicles can display:
Select Include CD Text.
iTunes 11 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH12148
Take care,
Alex H.

I can fax but the date does not show up on the fax, display nor confirmation. need info to fix

HP7500A printer, just purchased. Works fine except for date. Since I must have evidence of time sent on fax, this does not do the job.
This question was solved.
View Solution.

Hi Mbailey212,
Do you have the date/time set on the machine itself? to do so:
Go to the front display of the printer, and ensure the printer's display is on the home screen, if its not, the home light on the upper left will be lit. If so, touch it and it will take you to home, then arrow right once and select settings, scroll down to preferences and select it. At the top you should see date and time, select this and enter in the correct date and time.
Let me know if this helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

When I send invites for events in ical, the event does not show up on the person I invited calendar

Hi,
I am sending invites to my co-worker on a Mac through ical. When my co-worker accepts the event it doesn’t show up on his ical. How do I fix this?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
See also:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)

I connect my iPad to my PC and open iTunes, but the iPad does not show up in sidebar. I want to sync. How do I do it?

I have my PC on, then plug in my iPad (which is on) and open iTunes. The iPad does not show up in the sidebar. How do you get it to show up so that I can select the iPad and then configure the sync settings in each of the settings panes....hoping that these actually show up.
In the manual it says "log in to your computer user account before connecting iPad". I am the only user of this PC...does this mean some other user account. I am confused. I need "baby steps" to tell me how to do all this....very senior and just learning about this wonderful machine. I will very much appreciate your help.

If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.

XML child 'Title' does not show on web page

I have imported an XML file and when I launch the page the
title does not show.
The following is on my page but does not display "
<td><?xml version="1.0" encoding="UTF-8"?>
<Title>Miss Congeniality 2: Armed and
Fabulous</Title>xx </td>
The rest of the field do display and I can not understand why
'Title' Does not display.
Thanks for any help
David Merchant
The following is the code to display the data:
<cfloop index="MyCounter" from="1" to="#Counter#">
<tr>
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
<td>#mydoc.Collection.DVD[MyCounter].UPC#</td>
<td>#mydoc.Collection.DVD[MyCounter].ProfileTimestamp#</td>
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
<td>#mydoc.Collection.DVD[MyCounter]["SortTitle"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Rating"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["ProductionYear"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["RunningTime"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Audio"]#</td>
</cfloop>
This is the XML file I am reading
<?xml version="1.0" encoding="us-ascii"?>


<Collection>
<DVD>
<ID>012569557123.21</ID>
<UPC>012569-557123</UPC>
<ProfileTimestamp>2004-03-17
23:58:12</ProfileTimestamp>
<Title>Doctor Zhivago</Title>
<SortTitle>Doctor Zhivago</SortTitle>
<Regions>
<Region>3</Region>
</Regions>
<Discs>
</Discs>
</DVD>
</Collection>

I believe you want to print the XML node's text to a HTML
table cell. To do so you would change:
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
to
<td>#mydoc.Collection.DVD[MyCounter].ID.XMLText#</td>
Try appending ".XMLText" to your variables.
I would also consider droping the ToString method with:
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
to
<td>#mydoc.Collection.DVD[MyCounter]["Title"].XMLText#</td>
I don't know why you are invoking the toString() function
here and not on the other nodes. It only confuses me, and likely
you when you have to return to this code later, unless you are
trying to do something special with this node, like set your HTML
<title> tag.
If you are trying to set your document's <title> tag
then it should belong between the <head> tag of your document
and not inside your table, as a matter of semantics.

Dreamweaver cs5 does not show part of the properties tools...

Hello Everyone,
Dreamweaver cs5 does not show part of the properties tools on the bottom of the page, i.e. on HTML : TITLE and TARGET and on CSS: BOLD, ITALIC and PARAGRAPHS sections.
I have DW CS5 and WIN 7 Home Premium 64 bit, I have uninstalled and reinstalled several times but no luck, I tried to clean through regedit still no show.
I have onother computer installed same DW CS5 works OK.
Is there any folders keeping the old DW CS5 files or how can I uninstall all the traces complete DW CS5.
Thank you in advance
Denis

Make sure your settings are set to 96 dpi, for the font.
desktop right click
personalize
change to default 96 dpi
you will be good to go

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

The title does not show up in the Program Sequence window in PP CC

Similar Messages

Maybe you are looking for