The TO:  in group mail

I have set up a group in contacts.  When I send to this group, I have learned that it reads To: Undisclosed Recipients instead of the Group Name.  Some people do not open the email because they think it is junk or worse.  I don't want to send every group member the emails of the rest of the group.  Help!

Work Around:
On your mac (be interested to know if it works for Outlook):
1.  Open a new email
2.  Insert name of an existing group into one of the "To" fields as usual.
3.  Highlight all the resulting names in the "To" entry
     [Highlight first name, and while holding shift, highlight last name and all will highlight[]
4. Copy (Command C) the highlighted emails
5. Paste (Command V) nto a pages document
6. Remove the name and anything else preceeding the first < and also the first < of only the first entry whixh will look like this:
     [email protected]>,
7. Remove the > of the last email which will look like this:
     , Jane Doe <[email protected]
8. Copy the entire altered list from the pages document
9, Go to Contact Book and click + to add a new entry
10.. Name the entry (XXX Group for iPad) or whatever you wish to call it
11.  Paste all the copied altered list into any one of the email entry spaces
12.  Click on "Done"
13.  Create new email On iPad and click on + in any one of the "To" lines and search for "XXX Group for iPad"  You cannot just key in XXX Group for iPad!!!!!!!, you must use + contact search.
14.  Enter the selected iPad contact group into the "To" line.
15.  All the entries will now appear in the "To" line and you are good to go.
Adding or deleting email addresses from the iPad group:
Easiest:  Alter the original mac group in the usual way and repeat steps 1-14 above.  It seems impossible to edit within the emai line of the iPad contact entry.
Rediculously simple once figured out.
Happy emailling, but please send Bcc so that you don't spread your groups' email addresses all over the internet for spam, viruses, and other unwanted emails.  Be considerate and ask your recipients to notifiy you if they wish to be deleted from the lists you compose.

Similar Messages

  • All names appear in the group mails.  They didn't before.

    I used to be able to send group mail with just the title of the group appearing in the "To" window. Now, all the names in the group have to be there or it won't go out. Sometimes I don't want the names there.
    iMac G5   Mac OS X (10.4.8)  

    Did not get it resolved.

  • Failure writing file and Failure sending mail: The user or group name is not recognized.Mail will not be resent.

    Dear All,
    I am using MSSQL SSRS 2008. 
    All the reports run properly when viewed via a web browser. However for subscription, I am having a strange
    experience. 
    The subscription having intermitten failure. I need to execute multiple times to get it work. 
    Following is the exception I am getting:-
    Failure sending mail: The user or group name 'xxxxx' is not recognized.Mail will not be resent.
    Failure writing file DailyPolicyExportCDN_ST@timestamp : The user or group name 'xxxxx' is not recognized.
    Following is the exception I retrieve from log files. 
    webserver!ReportServer_0-2!1b0c!07/31/2014-05:25:09:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeClientDisconnectionException: A client has disconnected from the Report Server Web service application
    domain ReportServer_MSSQLSERVER_0-2-130512716074991980. No corrective action is required. An error code has been submitted to ASP.NET to release the connection. The error code is 800708CA. ---> System.Runtime.InteropServices.COMException: This network connection
    does not exist. (Exception from HRESULT: 0x800708CA)
    Any idea what went wrong?
    Thanks in advance

    Hi NeoCK,
    According to your description, you can access your report successfully, but it fail to send e-mail subscription. Right?
    In this scenario, since you can access the report successfully, so this user has permission on report server. Please go to E-mail setting in your Reporting Services Configuration Manager, check if the current user has permission on that SMTP server.
    If this is still not working, please recreate the subscription and try again.
    Reference:
    SUBSCRIPTION
    ERRORs : Failure sending mail: The user or group name 'CB_OFFICE\XXXX' is not recognized.
    The user or group name 'MYDOMAIN\myuser'
    is not recognized
    SSRS
    2008: Failure writing file ... The user or group name 'domain\user' is not recognized
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • HT2500 Does anyone know how to remove a group from the address panel in mail?

    Does anyone know how to remove a group from the address panel in mail?

    I haven't seen too many questions like this on this forum.  Did you also try the photoshop forums?

  • What is the maximum number of addresses that can be sent in a group mailing

    Can anyone tell me the maximum number of addresses that can be sent as a group mailing?
    Thanks.

    "Does Mail complain when you try to send a message to several recipients at once? You might be surprised to know that Mail actually has no limit on the number of recipients to whom you can send a message! So, what's going on here?
    Chances are it's your Internet Service Provider (ISP) that's preventing your message from being sent. Your ISP might do this, for example, to deter folks who send unsolicited bulk commercial email (such as "spam" or "Junk mail") to a large number of addresses.
    If this happens to you, contact your ISP and ask them if they enforce a limit on how many recipients each email message can have. If there is a limit, you can either send your message to fewer people, or divide your recipient list into multiple sets and send the same message in batches (each time to a different set of recipients). "
    Brilliant! Thanks.

  • How can I get google groups mail to appear in the Mail application on my iPhone 5?

    How can I get google groups mail to appear in the Mail application on my iPhone 5?

    Try to use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • I have an issue with the address browser in mail in Yosemite

    I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
    Previously in my pending to send email toolbar there was a contacts icon which I clicked  on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
    Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
    An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
    This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
    Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
    I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
    Any suggestions?
    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    Cheers,

    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

  • Is it possible to install an SMTP proxy that will handle splitting group mail?

    I am running OS X 10.9.3 with Server 3.1.2 on a Mac-Mini Mid-2012. I learned on my last implementation of OS X 10.9.3 that Mavericks sometimes has issues with handling group mail.  As I rebuild my network, I am wondering if it is possible to install a SMTP proxy that can receive, process, then forward mail on to the primary mail server.
    For example, if mail is sent to a group account, this SMTP proxy would repackage the message as a message to a carbon copy list of all the group members, but if the mail is sent to a user account, the mail is forwarded unmodified.  Like this:
    As an alternative to this, I would also be interested a solution in which the Linux Mail Server referenced the Open Directory for account information, including password authentication, so that if a user in the Mac Network updates his password, that he can use the same password to access his mail on a webmail client or via the Mail.app.
    This is a callout for discussion points, ideas and recommendations. There is no problem here to fix necessarily.

    I am not aware of a tool to do the group splitting for you, this is normally the responsibility of the mail server itself.
    However with regards to your second query, a lot of people use a product called Kerio Connect instead of Apple's Mail server. Kerio can run on the same Mac server but in general is a far more powerful mail server. It does include the ability to authenticate user accounts against Open Directory.
    There is one issue you need to be aware of, like nearly all mail servers it uses the 'username' as the main email address, so if you want an email account of [email protected] then your Open Directory short name need to be jsmith, if you want your email address to be [email protected] then your user short name needs to be john.doe and so on.
    Note: While I have specifically talked about Kerio most other mail server including those for Linux would be able to link to Open Directory via LDAP and authenticate email accounts. The same link between email address and short name would usually apply.

  • How to create a group mailing list in JavaMail?

    Hello,
    I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
    That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
    Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
    Thanks in advance!

    Hi:
    I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
    Best regards,
    Fabio Galarraga.

  • How to create a group mailing list?

    how to create agroup mailing list?

    i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column.   this is after i created a new group under address book, & then drug over individual names into the group.   what am i doing wrong?

  • How can I sync the address book from Mail to my Address book?

    Ok, I open a new message and click on the Address Book icon in the new message to find my contacts on the address book, I choose the group I am looking for and the group has people on it that I have already deleted from my address book! How can I sync the address book from Mail to my Address book?

    It is using the same database on disk. You may have to re-launch Mail.

  • I dont receive e-mails with attachment sent to OS X Server 3.0.1 Group-mailing lists

    I have a small company using a mac mini with mavericks and server 3.0.1.
    We are using most of the services available in OS X server (except DHCP, Netinstall and Xsan). One of the services we use the most is Mail server, and the whole company uses that as our primary mail server.
    We have set up several different Groups and activated group-mailing lists on some of them. The setup has been working very good for over a year (started using it with Mountain Lion Server).
    Recently I was going to send a christmas card to all employees using the workgroup mailing list. I was using the stationaries in Mail, and it was sent as normal but never recieved by me or any of the other employees. Below is the SMTP Log
    Dec  6 17:10:16 server.mydomain.com postfix/smtpd[29101]: connect from unknown[10.0.1.16 *<- my local IP address*]
    Dec  6 17:10:16 server.mydomain.com postfix/smtpd[29101]: 480451503B0A: client=unknown[10.0.1.16 *<- my local IP address*], sasl_method=CRAM-MD5, sasl_username=myusername
    Dec  6 17:10:16 server.mydomain.com postfix/cleanup[29109]: 480451503B0A: message-id=<[email protected]>
    Dec  6 17:10:16 server.mydomain.com postfix/qmgr[23288]: 480451503B0A: from=<[email protected]>, size=98063, nrcpt=1 (queue active)
    Dec  6 17:10:16 server.mydomain.com postfix/local[29110]: 480451503B0A: to=<[email protected]>, relay=local, delay=0.13, delays=0.05/0.01/0/0.08, dsn=2.0.0, status=sent (delivered to command: /Applications/Server.app/Contents/ServerRoot/usr/libexec/MailService/list_serve r_post post workgroup)
    Dec  6 17:10:16 server.mydomain.com postfix/qmgr[23288]: 480451503B0A: removed
    Dec  6 17:11:16 server.mydomain.com postfix/smtpd[29101]: disconnect from unknown[10.0.1.16 *<- my local IP address*]
    I did some trial and error and it seems like it is linked to the fact that I have attachments to the email. Sending an email with only text is recieved like normal. Even attacment like PDF or jpg is "blocked" it seems. I have tried using email outside my domain but still the same result. Sending the same email (with attachment) to all reciepients (not using the mailiing list) works and is recieved by everyone. I have turned off all email filtering settings on the server but still the same result.
    Is anyone else experiencing the same problem? My guess is that this is a Server 3.0.1 hickup, so it would be nice to get confirmation from others experiencing the same.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • How does one create a GROUP mailing list from an e-mail message ? ?

    I am having no end of frustration trying to figure out - using the latest versions of Apple Mail and Apple Address book in side-by-side windows, t he following:
    How to select; then 'drag & drop' a list of email addresses from an incoming email message I am reading, so that I can create in my own address book a duplicate "Group" list bearing all the addresses that got the message.
    I am sure I have been able in the past to use simple drag-n-drop technique between the mail window and the newly created "Group" window in Address Book, but it won't work this time .
    Is there a script or a third party app somewhere that will lift addresses out of the "TO" and "c.c." fields in an Apple Mail message and import them into a designated (new) 'Group' list in Address Book.
    Or is there a way to create a CSV file from an email message - if that will do the trick ?

    Mailscript's Add Addresses script should open a window with all the addresses in the email listed. You can select the ones you want to import, you can choose the group or create a new one, and you can pick the label for the email address. It will stay open so that you can add different emails to different groups.
    Your description doesn't sound anything like Mail Scripts.

  • I inadvertently removed the junk mailbox from Mail.app in SL, how can I recreate / restore it ?

    Hi,
    Well, the title says it all : I inadvertently removed the junk mailbox from Mail.app in SL,
    it still is spresent in my ~/library/mail folder, how can I recreate / restore it in mail.app ?
    Since I have a fair number of email accounts, intelligent mailboxes, rules and archive folder, I really don't want to rebuild everything. And, no, I can't use time machine to restore it.
    All help will be greatly appreciated.

    Hi AdamKB, sorry for late follow-up.
    What I lost is the "container" that groups all junk mailboxes in one place in Mail, like is done for all the inboxes.
    The problem is that I lost visibility on all junk mailboxes. It is only a visibility problem because the junk mailboxes are still present locally for my POP accounts and remotely for may IMAP accounts, I justdon't see them anymore in Mail's interface.

  • How to send group mail

    Hi all,
      We have a report prgm that will send a mail to SCOT to lotus notes.
    In lotus notes, we have a group mail (Example: SAP_TEAM). How we can send mails to the lotus notes group...?
    Thanks,
    J Kumar.

    Hi Jitendra,
             In SBWP you need to create a Distribution List to whom the mail has to be sent and in your program pass the Distribution list name with type 'B' in the receiver list of your mail sending program then all the members of that Distribution List will receive the mail.
             Hope this is what you were expecting for.
    Thanks,
    Prashanth

Maybe you are looking for

  • ALE logical system - File -- XI -- R/3 scenario

    Hi I have the following scenario which I'm trying to run. File --> XI --> R/3 scenario. I have created a sender agreement XID|ASN_out|NBD where XID is my XI 3.0 system and NBD is my R/3 system. I have also created an interface determination and recei

  • BusinessObjects XI 3.1 - Connection to Infoview

    All, I'll try to explain my problem. I cannot use anymore the WebIntelligence application of my test environment, as I'm not able to reach it. I can display correctly the CMC Home page, but if I launch BOE Java Infoview: http://<HOST>:8080/InfoViewAp

  • Move OEM central repository to a new database

    Hi, We want to move the OEM central repository to a different machine, we would like to migrate the data from original database to the new database. What's the best way to do that and how to re-configure OMS to use the new database? Thanks!

  • Mac Book Battery Question

    If I have my charger plugged into my macbook pro 2011, but it is not plugged in to the wall(so it is not charging), will this make the batter of my mac drain faster?

  • [Solved] Amarok stops playback after switching audio streams

    Well, I'm posting this here so if anyone else has this bug, and search the forums, they will find the answer, since I didn't find the answer in the wiki (atleast not the one for archlinux). This is on a new install of Archlinux, running kde4.3 but on