The Tolerance limit for type "1" not running in Av. Control

In my project I am unable to see the effect of Warning on budget even though Activation type 1 with tolerance limit "1" is activated for 50% of budget.
The actual cost are posted by MB1A against reservation to the activity and material reservations are created.
Although when the costs exceed more than 50% the system status shows BUDG ISBD AVAC for the said WBS.
System does give the error on reaching 100% level of cost i.e. no "3" tolerance limit is successfully running.
A reply /suggestions shall be appreciated.
Thanks
Rajeev

Hi,
We are also getting the same error message when posting from an external system.Could you please let me know if you were able to resolve it?

Similar Messages

Tolerance Limit for BOM

Dear ALL
My client have a following requirment.
1. At the time of confirmation in Goods movement screen some user change the componet qty. for eg if a FG bom had explode a componet qty of 1 Kg they will do changes & do confirmation of 2kg.
2. So now my client want that suppose if some one do changes system should cross check it with BOM qty & should allow only by +/- some %
3. As we can give the tolerance limit for order qty but how to apply tolerance to component used.
4. is there any userexit for this or i have to developed any Z transation for the confirmation to apply this logic.
All suggestion are welcome.
Thanks
Abhijit Gautam

Hi,
Not sure if you have found a solution, but the below BADi & exits might be of help during confirmation:
BADi:
WORKORDER_CONFIRM
User Exits:
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
Regards,
Vivek

Tolerance limit for STO orders

HI
I want to set the tolerance limit for under delivery and over delivery qty tolerance. Where can we set the tolerance limits for stock transfer orders from plant to plant ?

Please check OSS notes:
Note 1093582 - FAQ: Delivery complete indicator ELIKZ
5. Question
In which cases does the system automatically set ELIKZ in stock transport orders?
Answer
ELIKZ will be set at the goods receipt stage automatically, if the GI = GR quantity. This behaviour applies to intra-company stock transport orders and cross-company stock transport orders. See note 196280.
With stock transport orders the 'delivery completed' indicator is only relevant when there is no stock in transit The tolerance quantities from the purchase order are not taken into account.(see note 34737).
It is possible to modify the standard to allow to set the "delivery completed" indicator for cross-company stock transport orders. This modification is contained in note 167795.

Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?

Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva

Value Misc. Allowance for the flexfield segment Expense Type does not exist

Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay Sharma

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

The Data Access service is either not running or not yet initialized. Check the event log for more information

Hi,
I have SCSM with remote SQL and the SCSM Management server give below error
Message: Failed to connect to server ‘Name of Server’
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724. —> System.Net.Sockets.SocketException: No connection could be made
because the target machine actively refused it IPAddress:5724
I had try to restart SQL & MS with same error,
Also i had try the following
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
Not help meRegards

I had same error before
below steps to solve it
Make sure SQL Server Running & ServiceManager Database not full
Stop All SCSM Services,
System Center Management Configuration
Microsoft System Center Data Access Service.
Microsoft Monitoring Agent
Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
Start SCSM Services
Microsoft Monitoring Agent
System Center Management Configuration
Microsoft System Center Data Access Service.
Wait 2 min...
check Event Viewer...
hope this help you.
Regards, Ibrahim Hamdy

The software required for iPhone is not installed. Run the iTunes installer

I install and reinstall itunes many times following the "Support instructions" but nothing solve my problem.
At the end of each re-instalation, when i start itunes i get this message "The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again".
The driver USBAAPL.SYS, and the Apple Mobile Device Support is never installed.
Please HELP!
Thanks.

jaffy,
iTunes is not supported on 64-bit versions of Microsoft Windows Vista or XP. As is stated in this kbase article:
http://docs.info.apple.com/article.html?artnum=301301
To quote the article:
"iTunes is currently not supported in Windows XP Professional x64 Edition or any 64-bit edition of Windows Vista. Features may or may not work correctly."
Nathan C.

Quantity Tolerance limit for goods receipt

Hello Friends,
We are working on the stock transport order scenario, and the steps are as below
1. Stock Transport Order
2. Outbound Delivery
3. Post Goods Issue
4. Inbound Delivery
5. Goods Receipt
In our scenario, we were not maintaining any price in stock transport order and the invoice receipt at item level of STO is unflag. When we set the tolerance limit at stock transport order level and during goods receipt, if we post the excess stock then system is not allowing to post the stock and showing the below Error -
Message no. M7022:PU Withdrawn qty exceeded by...
Please suggest. Thanks in advance for your support.
Best Regards,
Goutham

Dear Friends,
Thanks a lot for your time. The problem was resolved, we maintained the tolerance limits at purchase order level and the same will be reflected at goods receipt from inound delivery. We cannot use either purchase value key function or GR/IR Tolerance since our stock transport orders doesnt have any price and not relevant for invoice receipt. Hence, the tolerance limit in sto is feasilble option for us.
Best Regards,
Goutham

SCOM 2012 Issue The Data Access service is either not running or not yet initialized

Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.

Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch.

The Data Access Service is either not running or not initialized.

When I try to access the OPSMGR 2012 R2 console I get the error:
Failed to connect to server "SCOM01.THG.local"
The Data Access Service is either not running or not initialized.
Date: 3/4/2014 8:41:07 AM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'SCOM01.THG.local'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 10.192.1.27:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine
actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.192.1.27:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.192.1.27:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
System Logs:
The System Center Data Access Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service terminated unexpectedly. It has done this 5 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service entered the running state.
Application Logs
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 0
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 4
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)

can you please check the following -
1) SQL services are running.
2) Data access service is running. you can try restarting the service too.
3) check that the OpsMgr database is not full.
4) start the 'SQL Vss writer" service.
5) check the sql server error logs.
6) Check your SQL accounts too.
7) Try this too -
To create this registry entry, follow these steps:
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Right-click Control, point to New, and then click
DWORD Value.
In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click
OK.
For example, to wait 60 seconds before the service times out, type 60000.
Quit Registry Editor, and then restart the computer.
Thanks, S K Agrawal

Tolerance limit for invoice

Hi all,
We have a requirement where we need to put tolerance limit for invoice both at the line item level and header level of the invoice. Also both % and absolute tolerance limits.i.e. if the invoice is 25 EUR or 3% more than the suggested price, it should be blocked. It is true both at line item and header level independently.
I tried in test systems and at line item level, we could achieve it thru configuring PP tolerance key.
Also at the header level, BD helps in achieving the Absolute tolerance.
But how can we configure at header level, % value of tolerance limit?
Appreciate the help.
Thanks,

I don't think there will be separate tolerance limit for header level in invoicing, it will not allow you to post with diff values in item and header.
Just check and let me know, if this wrong.
Regards
TGB

Tolerance limit for physical inventory

hai
In physical inventory there a option for tolerance limit setting for
A.. document level
B. item level
1. my question is this tolerance limit setting is for "QUANTIY BASED" (OR) "VALUE BASED "
2.in my problem the count is exceed the tolerance limit what they set for document level and item level , and how to post the document
Any Release is for posting the differnce while exceed the tolerance limit .
regards
christo

hai
my question is if the item value is excced the tolerance limit means the system will not allow to post the inventory difference document.
so how to post this document.
regard
christo

The administrative limit for this request was exceeded.

Hi,
Am getting below error while adding machine to domain
C:\>netdom join W2K12R2-DC-161 /domain:winvm.com /userd:Administrator /passwordd:cvm@123 /REBOOT
The administrative limit for this request was exceeded.
The command failed to complete successfully.
Even while trying to delete some entries from registry gives below error
ADSIEdit
Operation failed. Error code: 0x2024
The administrative limit for this request was exceeded.
00002024: SvcErr: DSID-0215030C, problem 5008 (ADMIN_LIMIT_EXCEEDED), data -1069
OK
Please help me urgently
I have searched on below links but could not get the correct workaround steps
https://social.technet.microsoft.com/Forums/windowsserver/en-US/83087f21-ba51-414d-9202-badea56ba83b/administrative-limit-was-exceeded
https://social.technet.microsoft.com/Forums/en-US/fea67c92-8dab-4711-8579-baaee4bca3f7/the-administrative-limit-for-this-request-was-exceeded?forum=identitylifecyclemanager
Nilesh Savant

Hi Nilesh,
Before going further, are we using domain admin account to use netdom and adsiedit.msc? Whether it is true or not, please try another admin account to check if the issue persists. Besides, to use netdom, we must run the
netdom command from an elevated command prompt. If the issue persists, please try to join the machine to the domain from the machine itself to see if it can be successful.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
I would appreciate any help...
Thank you

This worked for me. GP
Problem : error 1075 and Local print spooler service is not running.
problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista. HP came up with simple solution below. The regedit part is what fixed mine. I did not need the safe mode part. I think Lexmark should add the solution to your knowledge base.
==============================
From HP: Please perform the below given steps in safe mode to resolve the issue.
Reboot your notebook and press F8. The system will show some booting options select safe mode.
Note: Starting computer in safe mode may take some time.
Uninstall the printer using Programs and Features from the control panel of your notebook.
Uninstalling any software from Control Panel :
1. Click on Vista (start) button
2. Click on control panel
3. Double click on Programs and Features
4. Click on YOUR Lexmark Printer and click on remove.
Download and reinstall the printer software using the below given link :
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
NOTE: Clicking the link may give an error indicating it is invalid.
Copy and paste the entire link in a new browser window.
After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
Click on Vista (Start) button, and type Regedit.exe in search bar
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe
Restart the computer.
This should resolve the issue.
For information on keeping your HP and Compaq products up and running, please visit our Web site at:
http://www.hp.com/go/totalcare

SCOM2012 R2 The Data Access service is either not running or not yet initialized check the event log

Can U guys tell me the solution of it i am using scom 2012 R2 with sql server 2012 High availability solution
Failed to connect to server
The Data Access service is either not running or not yet initialized check the event log
Date: 5/6/2014 5:27:49 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'PPLKHIHOV23.ppl.com.pk'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://pplkhihov23.ppl.com.pk:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020292. TCP error code 10061: No connection could be made because the target machine actively refused it 172.16.0.107:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 172.16.0.107:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://pplkhihov23.ppl.com.pk:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020292. TCP error code 10061: No connection could be made because the target
machine actively refused it 172.16.0.107:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 172.16.0.107:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 172.16.0.107:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)

Get "System Center Data Access Service" is running Automatic not manual and verify that SQL server is running and connectivity between SCOM and SQL is up and not slow for any application run on background.
To make sure that no application take utilize connectivity between SQL and SCOM. Try to restart SQL and SCOM and check again.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

The Tolerance limit for type "1" not running in Av. Control

Similar Messages

Maybe you are looking for