The total goods movement status not changed after goods receipt using MIGO

Dear gurus:
when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
how can i do to make the status change when i receive goods in MIGO against inbound delivery?
best wishes,
David

Hi,
If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
Amit

Similar Messages

  • HU status not changing after GR

    Hi All,
    For a stock transfer order we create outbound delivery and create HU and then do PGI and at the receiving site we do GR via HU in MIGO transaction.
    however the status of the HU changes after it is created and after it is PGI ,,, but after doin GR the status does not change.
    Please help me with this ,,,
    Regards,
    Samuel

    hi,
    I am doing GR in MIGO transaction with respect to outbound delivery via HU, I am not creating inbound delivery.
    Regards,
    Samuel

  • Partititon1,2,3 in  group ODS,FAC status not change after data redistribute

    Hello,
    first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
    1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
    i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
    i have made a redistribute action like this
    1. double click what i want to distribute
    2. select the relevant partition , for example partition 0001
    3 click the execute immediatelly button .
    when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
    the log message is
    Data Redistribution cannot be continued.
    Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
    the SQL 6047 detail information is like the following. I don't know what happens.
    it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
    db2 => ? sql6047
    SQL6047N Database partition group cannot be redistributed
    because table "<name>" does not have a partitioning
    key.
    Explanation:
    At least one table in the single-node database partition does not
    have a partitioning key. All tables in the single-node database
    must have a partitioning key before the database partition group
    can be redistributed to a multiple-node database partition
    group.
    The operation was not performed.
    User Response:
    Use the ALTER TABLE command to specify partitioning keys for
    tables that do not have one. Then try the request again

    Before redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
    All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
    Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
    select varchar(tabname,30)
    from syscat.tables a
    where tbspace='<your_tablespace>'
      and not exists (select partkeyseq from syscat.columns b
                             where a.tabschema=b.tabschema and a.tabname=b.tabname
                                      and b.partkeyseq > 0)
    Brigitte

  • Goods Movement status of delivery not updated from C to A

    Hi
    I am facing a peculiar problem.
    We reversed goods issue using VL09 however the goods movement status of the delivery has not been updated. The GM status is still showing C- Completely processed.
    If we are trying to repeat the process again thinking that reversal has not been done using VL09 for that particular delivery error message is displaying already the goods reversed.
    Here we are missing the link. Though the goods reversed status has not been reflecting in the delivery.
    Regards
    Maruthi
    Edited by: MARUTHI RAM on Apr 18, 2009 1:25 AM

    1)  First check in MB51 with movement type 602 whether you could see the delivery reference
    2)  Next go to VOV7, select your item category and see what is maintained for the field "Completion Rule".  It should have been "B".
    3)  Next go to VTLA, select the item category for the combination of your order type and delivery type and see whether you have maintained "+"  for the field "Pos./neg. quantity"
    thanks
    G. Lakshmipathi

  • Total goods movement status in SD module

    hi all,
    wht is "Total goods movement status" is SD module .
    can u explain me with an example and how can i use it in creating open return orders.
    thanks

    Can we do PGI from VL03N?  I dont think it is possible.  I can see that the PGI option is always in disabled mode in VL03N.
    You can only do PGI from VL02N
    Can you check whether a material document was created by clicking on  the document flow from VL03N ?  What happens when you do the PGI for the same delivery again in VL02N?
    Regards,

  • Preference status not changed for the processed products

    Hello All,
    While Aggregating the vendor declaration, I am getting the message as below
    Preference status not changed for the processed products
    Could you please help me to resolve this issue.
    Thanks & Regards
    Rahul

    Hello Rahul,
    aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
    Kr,
    Gabriel.

  • Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

    Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • Rented movie does not play after download if not connected to the internet

    rented movie does not play after download if not connected to the internet

    Hello b noir.
    Thank you for your interest in solving my problem.
    What I did I opened iTune. I read the information about what does my computener need to play back a rented movie. My computer is okay to play back rental movies. So I went to the iTunes store, I searched for the movie I want to watch, i singned in into my Mac account and I bought the movie. The movie started to download to my computer, it took some time because I bought a HD version, but it never stop and after a couple of hours or little less the movie was in the Rented folder of my iTunes and also I checked to be sure that was in the movie folder. So, next day I open iTunes and click on the movie, it opens but I wait for five minuetes and never started to play back, so I tried several time and I looked for info in different internet forums but I couldn't find anything that help. So I posted the problem in this forum and also I called Apple. Apple contacted me and they let me to download the movie again. So I did it and now I will watch the movie later. Not sure if the movie will play back normally or if I am going to have the same problem. I'll keep you posted.
    Apple representative did not know why this happened.
    Thanks.

  • Total goods movement status using structure 'LEDLVSTATDISPHEAD'

    Hi,
    I'm trying to get the 'Goods movement status' for a Delivery once PGI posting is done. However the tables VBUK & VBUP maintain this status at Sales order line item level. This doesn't give the correct picture in cases where there are more than 1 Delivery for a Sales order line item.
    At Delivery level the 'Goods movement status' leads to a structure 'LEDLVSTATDISPHEAD'
    Please advice how to get a field value (for goods movement status) using this structure ...
    Thanks & Rgds,
    Pradeep

    Hi-
    Just wondering to know how you were able to resolve the issue. i am facing similar situation, can you please let me know how was this sovled.
    Thanks.
    Ramesh

  • Form display based on Goods movement status

    Hi all,
    Delivery note should be printed only when VBUK-WBSTK (Total Goods movement status) is equal to C (Completely processed). Can this be done in a Smartform? If so how?

    Hi,
        Check the condition in driver program before calling the smartform.So that it will call the smartform based on condition.
    Thanks,
    suma.

  • "Goods Movement" is not allowed (ORD 100020)

    When I do goods receipt via tcode MB1C and movement type 521 without production order number.An error occurs.
    "Goods Movement" is not allowed (ORD 100020)
    Message no. BS 007
    Diagnosis
    The current status of object 'ORD 100020' prohibits business transaction 'Goods Movement'.
    Procedure
    To process business transaction 'Goods Movement', you first have to change the status of object 'ORD 100020' to allow the transaction 'Goods Movement'.
    This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
    If I input a production order number in ORDER field of account assignment block,I can complete the action sucessfully.So I want to know the reason.Can you help me?

    Hi,
    Pls check with the status profile in OPJH.
    Check whether any user status has been set in that status prifile. ( say for ex .User status which forbids the the Goods receipt unless the Confirmations are completed )
    Regards,
    Sheik

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • Inspection lot not generated after goods reciept?

    Dear SAPIENTS,
    Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
    Regards,
    Kaushal Rai

    Hi Kaushal,
    For Inspection lot from GR, 01 Inspection type is enough.
    - Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
    - Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
    Regards,
    Keerthi.

  • Goods Movement" is not allowed (ORD 100000)

    I get the error below:
    Goods Movement" is not allowed (ORD 100000)
    How do I allow it?

    hi
    Check the REL status. Check whether your project/WBS/network has been released or not.(The network/activity should have an REL status set in the System Status
    field).
    regards
    kunal

  • Inbound delivery goods movement status.

    Hi,
    Goods receipt is posted against an inbound delivery. Goods movement status shows as completed (Status C) in VL33N transaction. However when I look at delivery status in the table VBUP it shows the goods movement status as A.
    Does any one of you faced this issue. If faced what would be the root cause..?
    Is there any OSS notes available to correct this issue..?
    Please let me know your thoughts
    Thanks
    Umakanth

    Hi Fernando,
    Which transaction are you using for the posting?
    Please, consider that Inventory Management Transactions (MBxx, MIGO, etc) do not update the Inbound delivery status and document flow.
    If you use a Shipping Transaction like VL32N for the receipt, then this should update the delivery.
    You can see the SAP Note 199703 about this.
    As of Release ERP 6.0, MM transactions can update the inbound delivery if this has been activated in the customizing.               
    See the Note 1050944 in this regard:                                                                               
    "As of ERP 6.0, you can use inventory management transactions (MB0A, MIGO, MBST) to carry out the goods receipt for inbound deliveries in the standard SAP system in such a way that the inbound delivery that is relevant for goods movement is updated.(...)".                 
    If you are in this release or higher you might want to see this note.
    I hope this helps!
    Esther.

Maybe you are looking for

  • How do I activate print button on iPad

    Printer is not recognized by iPad - I get message 'no AirPrint printers found'

  • How do I get my ipod to work after being disabled

    My daughter has locked my ipod. It is disabled and says that I must connect to Itunes. But where in Itunes do I go to get it active again?

  • FAGLB03 peroid balance not tallying with line items within

    Hi, When i go to FAGLB03 and tally  the balance of a recon account for a particular month with the line items in it, it does not tally This is happening for one period within the fiscal year, others period balance tally with the line items What can b

  • HTML5 output in IE8

    Hi, Is there any possibility to view the output of adobe captivate html5 in IE8 browser. Please share the information. Thanks, Lokesh

  • Migrating existing partitions to SSD + HDD

    I have a Lenovo T530 i5 that I purchased last fall with 4GB ram and a 500GB 7200rpm hard drive, with the intention of upgrading it to 16GB and an 256gb SSD when time/funds allowed. That time is now. The machine is currently multi-boot Windows 7 Pro,