The transport status is red,what I should do?

Hello:
    When I do the first step of transport,transport the change request to 300 client.
    The status is unexpected change red and show the transport is error.
    I want to come back the status green,But I don't know what I should do ?
lexian
Thanks a lot!

Hi le,
just check your transport log in stms and also just check if you are re iporting the workbench request in the same system again then it will throw an error.
Regards,
Vamshi.

Similar Messages

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

What do i do if the battery life isn't what it should be?

I got my Ipod in late January or early February as a late xmas present, and since then it's become the closest thing to crack I can think of. However, I never really listen to it for more than say a 1/2 hr in the am another 1/2 hr in the pm. Maybe 2-3 days during the week I'll plug it into my computer at work and almost never watch video on it. I've run the battery test w/almost default settings, but the battery life seems to be around 6 hrs. Why is that? and what should or can i do about it?

Make sure to run the most current updater on it and then re-test it.

What does the password stored in the JAGENT wallet do, and what JAVA_HOME should I use for the pw_agent_util.sh command?

I am configuring the GoldenGate Plugin for OEM. There is a step to create the wallet. The documentation is not clear about the role of the password supplied. If I run the JAGENT as oracle user, should it match the password for the oracle user, or is this password separate? Also, should I use the OEM agent jdk for the JAVA_HOME setting?
./pw_agent_util.sh -jagentonly

Pat,
Morning. Good to see that someone is working on using the plug-in for GoldenGate within OEM12c.
If you are using the plug-in 12.1.0.2, you will be much better off with reporting on GoldenGate processes. In order to get the 12.1.0.2 plug-in to work, the JAgent 12.1.3.0 is needed and can be downloaded in the Oracle GoldenGate Monitor distribution (Configuring Oracle #GoldenGate Monitor Agent | DBASolved) . If you are using the old plug-in 12.1.0.1, then the JAgent is embedded with the GoldenGate software (Oracle GoldenGAte (11.2.1.0.1 and later) and Oracle Enterprise Manager 12c | DBASolved). I recommend taking the new plug-in!
Now to address you question about the password. The password is stored in the wallet under the GoldenGate home ($OGG_HOME/dirwlt) and is used directly for the JAgent to login to the EMAgent and communicate with OEM. The user name associated the password is configured in the $JAGENT_HOME (different depending on version, look for Config.properties). Then in OEM, the username defined in Config.properties and the password in the wallet needs to be provided before OEM will pick up the GoldenGate targets.
The $JAVA_HOME setting depends on the version of JAgent you are going to run. The JAgent 12.1.3.0 using JDK 1.7 or higher. The embedded JAgent using JDK 1.6.
Thanks
Bobby

As a sw tester, I need to log into a website with multiple accounts, but Firefox auto logins using the previous account info. What seeting should be changed?

Other than my misspelling, the sentence sums it up pretty well. Some other details are that the website isn't in the save passwords. I've seen this with IE8 as well, thus wondering if it's just a setting that's being missed. Already tried clearing the cookies.

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

I have a mac air that uses OSX 10.6.8 - i set up an adobe ID and now get an error message everytime I try to download the trial. anyone know what I should do?

having trouble downloading the trial of photoshop. Anyone know a fullproof way to do it?

OSX 10.6.8 does not meet Photoshop CC or CC 2014 system requirements. 10.7 is the minimum.
System requirements | Creative Cloud

I want to buy an unlocked iPhone 5c in USA, find a no contract SIM card for USA, and also be able to use it on trips to UK, possibly changing the sim card there. What model should I get and is this possible?

I cannot use T-Mobile, no reception in my house.

Hey samfromshrewsbury,
Thanks for the question. The following purchase page may have the information you are looking for:
iPhone 5c - Buy iPhone 5c in white, pink, yellow, blue, or green - Apple Store (U.S.)
http://store.apple.com/us/buy-iphone/iphone5c
If you buy a SIM-free iPhone, you will need to purchase a GSM-compatible nano-SIM card separately. In the United States, you can purchase such a SIM from AT&T or T-Mobile. When you travel internationally, you can use a nano-SIM card for iPhone 5c from a local GSM carrier. The unlocked iPhone 5c model is A1532 (GSM).
Thanks,
Matt M.

HT204365 I updated my iPad to 7 and cannot enter the Ibooks or Itones store What settings should make this happen for me?

I need help with settings to use Ibooks or Itones stores after updating my Ipad to OS 7

Check: Settings - General - International - Calendar - Gregorian.

How to know the Transport Request status?

Hi all,
i need to develop a report wherein i need to display the status of the Transport Request..i mean it should display wheteher it has move to the Production system?Is there any table or FM which gives the cross system details of the Transport Request.
Thanks in advance,
Rakesh.

Hi Rakesh,
Please check this FM.
TR_LOG_OVERVIEW_REQUEST_REMOTE
TR_LOG_OVERVIEW_REQUEST
TR_LOG_OVERVIEW_REQUESTS
Hope this will help.
Regarsds,
Ferry Lianto
Please reward points if helpful.

Using LR 5 to make slideshow and images in the preview are correct but when I play the actual slideshow the pictures are a lot smaller than what they should be. Help!

I'm making a slideshow with Lightroom 5. I'm using a 2014 Macbook Pro. Everything works except when I play the actual slideshow the pictures are smaller than what they should be. But the preview is showing the correct photo size. Does anyone know why this is happening and how to fix it? Thanks!

Hey ronfya
Did you ever get any feedback on this? I haven't read the Technicolor link yet. I was just trying to figure out why my stuff comes out darker on Vimeo. Could this be because FCPX is displaying it to brightly?
A.T.

QM & Technical Status are RED thouh request is running

Hi,
I have one request which is running even now-- (load to ODS)
in the monitor the request is running but in the manage tab of the data target both traffic lights of technical And QM status were RED!
Before the load was scheduled i had changed the ODS settings to see the QM status automatically and activate the ODS data data automatically.
This is very huge dataload and if there is anything wrong then i need to change it immedietly ! it takes nearly 40 hours to finsih this load--
Should there anything to change or is it OK?
Raj

Hi Raj
In General the moment you made the Qm status to RED it is
automatically stop all the related jobs or process in some
pecular cases you to kill the process via SM 50 . Just conatc t
your BASIS people immdeiately on this and ask themn to kill
the process related to the request.
And do the rest of the process like deltion of the request or
what ever...
Hope it helps you ..!
Cheers
K M R
Assigning points is the only way of saying thanx in SDN***
>
Raj Karan wrote:
> Hi,
>
> I have one request which is running even now-- (load to ODS)
>
> in the monitor the request is running but in the manage tab of the data target both traffic lights of technical And QM status were RED!
>
> Before the load was scheduled i had changed the ODS settings to see the QM status automatically and activate the ODS data data automatically.
>
> This is very huge dataload and if there is anything wrong then i need to change it immedietly ! it takes nearly 40 hours to finsih this load--
>
> Should there anything to change or is it OK?
>
> Raj

How to open the Transported model Object in the Target Portal Story Board

Hi All,
How To Transport Applications Modeled in Visual Composer from NetWeaver 2004s to NetWeaver 2004
I have transported one VC model from Development portal to Testing Portal. But Once i transported , under the
PortalContent -> Visual Composer -> Models folder , i am able to see the transport model and the view. If i want to edit that model in the VC story board , I am not able to see that model name in the list when logged into the visual composer Tool of the Testing portal server.
Is there any thing need to do the work around it.
And onemore thing, In the development portal server, when i am working on that model , it will be depended on on system object for retreiveing the BAPI data. In the Testing protal server after i transported. , i need to map some system object to run the model in Testing portal.
What is the work around this to map the system object with the Transported model in Testing portal server.
should i need to create the new system object even if the R3 server is same as in Testing portal server also. or the System object need to be create only if the mapped R3 server is different from the Development portal server.
Please let me know how to do this.
Regards
Vijay

Hi Marcel,
Thanks for the reply,
I have exported the .gml file from the dev server Then i trying to import that .gml file in the production server. when i click on the import file option .it is opening the popup and disappearing immediately with out browsing the file I dont know wht is the problem around it.
But agin in the production server, i have just opend one existing model. then i clicked on the Import file option. then the popup is allowing me to browse the .gml file. but after i browsed the file, if say ok, it will be merging with the already opened model itself.
Can u please tell me , what is the problem, i am not able to browse the file ,when no model is not opened in the VC.
REgards
Vijay

How to release the transport request

Some one please help me here on better understanding on how transport
are maintained and what steps should be taken before releasing it.
I know we can see the list in se so that will not be the answer of my
question need proper explanation on that please I will be highly obliged.
thank you
Bushan

Hi
Initially when a config request is raised...the settings are saved under a Request number. Every request is associated with a task under it.
Release the task first (select the task and press F9)and then release the request(select the request and press F9). The objects will be no longer locked then and are free to be moved.
Be careful while releasing the task. See the tables effected(if you expand task u can see). If you feel some unconnected table is included better a careful consideration be given while moving the request.
When you release the task...the system may prompt you to enter text..that is nothing but the identification/explanation of your activity. You can record the same.
Hope im clear
Regards
A
Message was edited by:
A.Aravind

Revert Back to the old status from newif error occurs in ServiceDesk Ticket

Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
In short please provide enhancement or routine or function module which can revert back to old status.

Although it might be manifesting itself slightly differently in LP8, I just wanted to chime in here and say that I've had that problem with LP7 as well. I import a lot of mp3's, and most of them work, but every once in a while it would get confused and I'd see that message. It's been a while so I don't remember specifically what I did, but I do know that with a little tweaking of the name it will work fine. If memory serves, when the file in question had the suffix actually in the name itself (filename.mp3), I'd just take the suffix out and it would recognize it. Although it could have been the other way around, adding the suffix to an mp3 file that DIDN'T have it in the name. Point is, it was an easy fix, and with a little name tweaking LP7 was able to understand. Hopefully that's all it will take with LP8 too.
Good Luck!

Transportation status in delivery

Hi All,
I have configured a Direct Leg in the route & shipment type as outbound delivery. The shipment costs have been calculated & account assignment is calculated & assigned to the GL account & Cost center & the service entry sheet has been created & fully transfered to FI. The document flow in the delivery shows the shipment as fully calculated & Completed, but in the transportation tab of delivery the transportation status is 'B', & when Iam transfering the costs to the Billing document, the log says that as the copy control is configured as shipment costs "F" the delivery is not completed with relevant to transportation.
Can anyone suggest what else needs to be done to complete the billing.
Thanks In advance.
Regards
Aravind

Hi Jonathan,
The price source in the copy control of delivery to billing is "F" i.e. price from shipment costs. The shipment costs have been fully calculated & the status in the shipment cost document is "C". In the delivery the status of transportation planning is set as "B", which is partially processed.
The pricing as you have mentioned of delivery to billing for delivery pricing procedure is not maintained.
Thanks & Regards
Aravind

The transport status is red,what I should do?

Similar Messages

Maybe you are looking for