The turn-on sound won't Work, the computer opens ok silently??

The turn-on sound won't Work, the computer opens ok, but silently??

Restart in Safe Mode, it's possible a cache may have become corrupt.

Similar Messages

  • 5.1 sound won't work with computer speakers, not sure

    Hi, I am having problems getting 5. surround sound to work with my SB Li've! 5. card and Cambridge Soundworks DTT3500 Dolby Digital system. The speaker system works fine, I've tested it with my DVD player through an optical cable hookup. The Dolby Digital light is supposed to light up when its receiving a Dolby Digital 5. signal, and when connected straight to the DVD player via optical cable, it does light up.
    But, when connected to my Li've! 5. card, it does not light up. I am using CyberLink PowerDVD which supports 5. sound, and I'm using the Digital DIN port in the back of the speaker system. The cable goes from the orange digital out port on the SB Li've! 5. card to the Digital DIN port on the Cambridge speaker system. The hook up should allow transmission of 5. signal, so maybe something is wrong software side. I might be missing a setting or something, on the player maybe or elsewhere. Any help would be greatly appreciated, thanks.

    I have been in the computer repair business for over years and work on main frame computers for the government and there are companies that back their products and there are companies that do not. Creative, in my opinion, is not a company that likes to back their hardware or software drivers. I remember in the old Sound Blaster 6 days of DOS and conflicting IRACs and not getting any help with their auto answer service. In my opinion, one of the reasons they have all this software driver issues, is they more than likely use another source to write the software and therefore the software writers do not talk to the hardware developers. Believe me this is very common as I see it all the time with the government contracted computer companies and their special software. What a mess. If? software developers do not talk to their hardware people on known issues then we get the results. Part of the problem is us consumers and our willingness to except anything when it comes to computers. I read of people staying up all night trying to resolve one little issue and will still except a degraded product. Do not think for a second these companies do not know this and use this backwards stupidity to their advantage. I would never give any computer product that much of my time because my time is money as well.
    Anyway, why do we all buy Creative? The answer is very simple. If you have ever herd the newest X-Fi sound cards with its 24 bit crystallizer on a motherboard it likes, well there is nothing like it. I have mine (I own this sound card as well) hooked up to a high end stereo and if my wife would let me I could blow out my windows in my study. That is when it is working and not squealing. The problem of course is we must get this wonderful sounding card on a computer it likes to work without squeaking or squawking. Lets face it, Creative is the only game in town when it comes to sound and I love great sound. shellback

  • My sound won't work on my ipod 5. I plugged the speakers in and it works fine.  When the headphones aren't plugged in and I turn the volume up it says that they are plugged in.  Please help !

    my sound won't work on my ipod 5. I plugged the speakers in and it works fine.  When the headphones aren't plugged in and I turn the volume up it says that they are plugged in.  Please help !

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. (this was already sugested) There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • My sound won't work, how do i fix it if I've already tried the audio MIDI setup?

    So i plugged in a stereo system and when i unplugged it the sound won't work anymore unless it's plugged in? How do i fix it?

    Check  this document.
    Error "Licensing has stopped working" | Mac OS
    Try each step.
    When you get to the license recovery kit, type sudo, leave a space and drag LicenseRecover.py into
    the Terminal screen, then hit Enter. It should look like this:
    Enter your password, but remember the cursor will not move. Just hit enter and let the script run.

  • My sound won't work on my ipad even though the sound is up and the button on the side is on volume? Any ideas ipad 2

    My sound won't work on my ipad even though the sound is up and the button at the side is on volume? Any ideas. For ipad 2

    They will replace it with a refurb of like kind if the problem is deemed to be hardware related and not caused by misue. They will probably try restoring the device and troubleshoot it on their own before they replace it for you .... And I'm talking about an Apple Store here.
    You should probably try this next.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

  • My Mac's sound won't work-the buttons do though

    When I play videos(i haven't checked youtube yet) my sound was out if i paused the video and restarted. Now my sound won't work at all or even for my Facebook games. I had this problem before with just youtube and i was able to fix that, but now i can't fix this. Help?

    Hey saxon198
    If it is just the one user account, then the next step would be to migrate the data that you have to a new user. The best method is to copy your Home Folder to an external hard drive. The next step after that is complete is to delete the user that is causing the issue. Then all you have to do is to copy your data back over. Just copy the contents of the documents folder into the new documents folder instead of replacing it. Now things that probably will not make the move unless you have iCloud or another syncing service is Contacts, Calendars and Notes. You can export those if needed. If it seems confusing or to daunting, then the next step would be to contact Apple Support for further help. I have provided a link to do so with multiple different options for you.
    Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    OS X: Manually migrating data from another Mac
    http://support.apple.com/kb/HT6101
    Contact Apple Support
    https://www.apple.com/support/contact/
    Regards,
    -Norm G.

  • I just got an iphone 4 yesterday. I got everything all set up and working great. When I woke up last this morning, my ipod has no sound and the albums covers are all mixed up. I've checked all my settings and volume control. My text sound won't work eithe

    I just got an iphone 4 yesterday. I got everything all set up and working great. When I woke up last this morning, my ipod has no sound and the albums covers are all mixed up. I've checked all my settings and volume control. My text sound won't work either. However, my ringtone works just fine.

    Have you taken the steps recommended in the User Guide:  restart, reset, restore?

  • My macbook's sound won't work - no output devices found in settings?

    I've been having a lot of issues with my Macbook.  It has a 2.4 GHz Intel Core 2 Duo processor and is running on version 10.6.8 Mac OS X.  It asks for certification whenever surfing the web or loading websites, and always redirects to a different page.  Now, the sound won't work at all - regardless of mute on/ off or sound turning up and down. I went to settings to check out the problem, and there is no output or input device listed or found on that page.  I have no idea what's going on, and now, even though it's plugged in it won't charge.

    First thing I would try for your sound output issue would be to reset the parameter RAM.
    Best of luck.

  • Please help. My sound won't work.

    I've had this iPod for awhile and sometimes when I try to listen to music, the sound won't work. I've tried turning my iPod on and off, but this doesn't work. I know my sound is all the way up. It usually works just fine with headphones but not without them. I turned my iPod off and on and it plate music for the first few seconds and stopped after that. It feels a little hot when I listen to music but I turned it off too keep it cool. And when I turned it back on and played music I noticed it getting a little hot when it stopped. Is it overheating? What do I do?

    It worked right after I pushed power and home button. But the sound is gone again. When I open music there is no slider for volume. The mute switch is not on, so I'm not sure what is wrong. Would u have anymore suggestions.
    Thank you

  • TS3274 Sound won't work for games

    THe sound won't work for games unless I plug In headphones. The setting shows like the sound is on.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • HP 6120n Sound won't work bought replacement sound card not sure of what to do

    HP 6120n  - Using win 7  - Sound won't work
    Tried restarting and Troubleshooter and it not not solve the problem
    Bought used replacement sound card (30 day warranty) but not sure of what to do to install it or even if it is necessary

    Hello @4u2bu,
    I understand that the audio is not working on your HP Pavilion a6120n Desktop PC running Windows 7 and you are wondering it you should install the new audio card you purchased. I would recommend that you first try the steps set out in the HP Support document: No Sound from the Speakers or Headphones (Windows 7), which has been designed to address audio issues with computers running Windows 7.
    Now if the above document does not work I would suspect a driver issue and since HP does not have audio drivers for your computer running Windows 7 I would suggest you go ahead and install the new audio card as it will have the needed drivers.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My iPad 3 iOS 8.3 suddenly stopped playing sound on its speakers while on Spotify. Volume max. Side switch not on mute. Tried rebooting thrice. Sounds won't work on other apps. Works with earpods.

    My iPad 3 iOS 8.3 suddenly stopped playing sound on its speakers while I was listening on Spotify. Volume was maxxed out. Side switch not on mute. Tried rebooting thrice. Sounds won't work on other apps (Soundcloud, NPR, Clash of Clans). There are sounds when I attached my earpods. I tried the switch to mono solution on the other threads, didn't help either.
    My iPad is generally muted because of classes, but when I un-mute it it works fine. It just stopped after one song, and now I can't get it to work. Any thoughts? Thanks.

    Hi!
    I've the same issue after updating to iOS 8.3. on iPad 3.
    sound is working properly only with headphones attached.
    when I tap on AirPlay button it says "Docking connector" while it should "iPad"
    when i play with sound settings and try to change e.g. some alert sounds, sound is played and volume slider in control center magically appears.
    any other app can't play sound.
    is there any fix for that?
    Thanks

  • My macbook pro is freezing/sound won't work

    A few days ago my Macbook pro started freezing up and requiring a forced power off each time. Sometimes the screen would go completely white, other times the cursor would still move but the display was broken and unable to be clicked. It happens at random intervals, sometimes without me even running any programs it will freeze up and go to a blank screen. A lot of times it takes a few consecutive tries to actually restart it in the first place.
    Anyway, I contacted Apple Support Chat and the employee helped me to Repair the Disk Permissions which provided a temporary fix. After it kept acting up later, I followed her instructions to do both a PRAM reset and SMC reset. However, after performing both of those today now my screen has gone dark blue a few times and also the sound won't work with or without headphones.
    Could someone please help me?

    A few days ago my Macbook pro started freezing up and requiring a forced power off each time. Sometimes the screen would go completely white, other times the cursor would still move but the display was broken and unable to be clicked. It happens at random intervals, sometimes without me even running any programs it will freeze up and go to a blank screen. A lot of times it takes a few consecutive tries to actually restart it in the first place.
    Anyway, I contacted Apple Support Chat and the employee helped me to Repair the Disk Permissions which provided a temporary fix. After it kept acting up later, I followed her instructions to do both a PRAM reset and SMC reset. However, after performing both of those today now my screen has gone dark blue a few times and also the sound won't work with or without headphones.
    Could someone please help me?

  • I can't listen files .wma, and the computer opened automatically safari at the page Flip4Mac: how can I solve this problem?

    I can't listen file .wma, and the computer opened automatically safari to the page Flip4Mac: I want to listen file.wma without installing software is not from Apple, how can I solve this problem?
    Thank you everyone

    Duh, install Flip4Mac. It has been Microsoft's officially recommended software for playing wma files since they stopped development of the Mac version of Windows Media Player some years ago.
    Quoted from http://www.telestream.net/flip4mac/overview.htm:
    Developed by Telestream and distributed by Microsoft, Flip4Mac components are the most trusted solution with professional support, stability, and official support from Microsoft.

  • My iPhone 4S sound won't work. I can't watch any videos or listen to music directly off my phone. It only plays with plugged into to auxiliary cord. Although, the ringtone and my alarm works, I can't change how loud either is.

    I have an iPhone 4S. My ringtone and alarm will work, on occasion my texting alert will too. Although, I can't control how loud I want any of these things anymore. Other than that, my slide to unlock sound does not work, neither does the click sounds when texting. I have checked to make sure these are all on and enabled in settings. My phone will not play music and I cannot hear any videos either unless it is plugged into an auxiliary cord and played through a stereo. I dropped it in the snow once, could this be why? Is this a malfunction? Can I fix it or do I get a new phone because of a defect? Thank you!!

    Your phone still thinks it is plugged into the stereo. I don't remember how to solve this but perhaps you can search through the forum or maybe one of the members here will jump in on how to switch the playback to speakers.

Maybe you are looking for

  • Anyone know of Marketing company for iWeb sites???

    Does anyone know of any reliable companies that can handle the marketing, search engine placement, email marketing, etc for some site I have done with iWeb? I have my sites up but am far too busy with my businesses to sit down and spend a lot of time

  • Site to iweb

    I lost all my data on my machine recently and had to do a reload. My site is still on the web but i want to import it back into the iweb application. My questions are: 1.)Can this be done? 2.) If so, what files do I need to copy where? Thanks,

  • DNG/raw+XMP workflow comparison

    [ Note: this discussion has been branched from an existing one (link on top ^) and deals about DNG-raw+XMP -PECourtejoie ] Omke Oudeman wrote: What Disk based XMP data file you are referring to and you think Camera Raw get's involved in this while wr

  • Can PSE 10 open Canon G16 Raw images?

    I am a professional photographer and educator. I have a client who just purchased a Canon G16. He has PSE 10, and he has contracted with me for some tutoring. I want to include editing G16 Raw images. However, I wonder if PSE 10 can open G16 Raw imag

  • Saved Workbook takes long time to re-open

    Any BEX workbooks that are saved locally, take more than 5 minutes to re-open within Excel??? anyone have any ideas as to why this would be?  The workbooks themselves are never more than 200k and all are manipulated in Excel 2007 thanks in advance