The "Two Dots" for two springboards default?

Correct me if I'm wrong, the two dots on the top of the dock, below the springboard, indicate that there are two springboards available for viewing. Are these two dots present on the default iPhone and when there are no apps. in the other springboard since 1.1.3(4)? I have an 8GB iPhone that I bought last december which has 1.1.4 on it but doesn't display the two dots unless I turn on the process that allows you to reorder apps. on the springboard or if I add apps. to a second springboard. Is this default behavior or should these dots at the bottom of the springboard be there at all times?
(I've noticed these two dots on all the pictures Apple displays of the iPhones in their factory defaults screen.)

The number of dots that appear are determined by the number of Home screens you have; you can have up to 9. This feature was introduced with 1.1.3. If you only have the one Home screen, then I think you'll see no dots, rather than one, but I'm not sure about this as it's been a while since I only had the one Home screen.
Edit: Just tested it. And yes, if there is only the one home screen, then you see no dots, until you activate the icons, at which time you see two dots - one white and one grey. If you had two screens and activated the icons, then you'd see 3 dots - two white and one grey. And so on. Seems like normal behaviour to me.
Message was edited by: jia10

Similar Messages

HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

http://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

How to have two seperate Itunes on the same computer for two Ipods?

Is there a way to have two separate Itunes downloaded on the same computer for two different Ipods? My sister got a new Ipod and she wants to hook it up to the computer but when ever she does it just pulls up my Itunes and has all of my songs on there. How can we each have our own Itunes?

There's many ways to accomplish this. You could create two accounts in Windows. That way everything is completely separate. Or, you could manually manage your music in iTunes -- this way it won't automatically sync your music onto her iPod. More info here:
http://docs.info.apple.com/article.html?artnum=61148
http://docs.info.apple.com/article.html?artnum=93779

After formatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes.

After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
iPod Classic 80Gig.
Thanks in advance.

Dear planb77
Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help.

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

HT4515 My iphone 4 had been sluggish so I did the 2 button reset(?), now it's been frozen with the apple logo for two hours. What should I do?

I have no clue what I'm doing. I held the home and lock button and ignored the slide to power down screen. Now my phone has been locked on the apple logo for two hours. I've tried hitting both buttons in all combinations. I had nearly a full battery before this fiasco. My phone is fully updated. Help me please?

if you do not have the original owns apple id you will not be able to use the iPhone because of the activation lock you will need the original owners apple id to turn off findmyiphone if you do not have it or if you cannot get it you will not be able to use the iphone can you contact the original owner

Can I use the same iTunes for two iPods

Hey guys I wanted to ask if it is possible to use the same itunes for two ipods. I have an ipod touch 4g and ipod shuffle. would music be erased if I did or would their be any problem if I do so. Thanks in advance

No problems if you do it right. See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

My ipod has been stuck on the apple logo for two days

my ipod has been stuck on the apple logo for two days after plugging my ipod into a macbook that has recently jailbroke a friends ipod. i did not jailbreak but my ipod still crashed. my home button is broken so i am not able to do all these home remedies i find on the internet. can apple help me or should i just give up on my ipod?

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem

Do we need to create two zones for Two HBA for a host connected with SAN ?

Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
    pwwn 50:06:NN:NN:NN:NN:NN:NN
    pwwn 50:06:NN:NN:NN:NN:NN:NN
          pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?

if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production.

I have two ipods for two children.All apps games and music ect, sync with both which is great.Now how can I give them there own game center IDs without loosing this perk?They would like to play and share games together and with friends.

I have two ipods for two children.They love playing the games.The great perk is there lynced so they share apps.Problem,how can I give them both individual IDs for game center without loosing this perk so that they can play with friends?

I have two ipods for two children.They love playing the games.The great perk is there lynced so they share apps.Problem,how can I give them both individual IDs for game center without loosing this perk so that they can play with friends?

Can i create two playlist for two i-pods

can I create two playlist for two I-pods

Hi rcranford,
Welcome to the Apple Support Communities!
You can create different playlists in iTunes on your computer and sync only the specific playlist you want to each device. Please use the following article for information on creating playlists in iTunes.
iTunes 11 for Windows: Create a playlist
http://support.apple.com/kb/PH12340
Have a great day,
Joe

Trying to upload two songs for two hours and had to upload to and agree to icloud which I have no interest in whatsoever and now all my applications and music have been deleted from everywhere

Trying to upload two songs for two hours and had to upload to and agree to icloud which I have no interest in whatsoever and now all my applications and music have been deleted from everywhere

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

Can i load two different itunes on the same computer for two different ipods?

Can I load two different itunes on my computer for two different ipods? Or how can I get it so that when I click on itunes, only my songs come up and not my wifes? And the same for her.

Yes. The simplest way is to have separate Windows accounts for each user. When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

How can I use the same contacts for two users

MY wife and I are using the same account. I want to give her a seperate log in account (user). All is working fine excempt for "contacts". These are at the moment empty. How can I get our contacts also in her new contact list.
Are there any other things I should also look for, in executing this exercise

Hi Iemke Kuijper!
I have two articles for you that will help you achieve this goal. First, here is an article on exporting your contacts files and importing them:
Contacts: Export and import your contacts
http://support.apple.com/kb/PH11586
This next article will help you get the contacts file from your user account into your wife’s user account:
OS X Mountain Lion: Share files with others who use your computer
http://support.apple.com/kb/PH10636
Thanks for using the Apple Support Communities!
Cheers,
Braden

NO internet in the network except for two computers after installing ASA 5505

Hi Guys,,,
I dont know if any of you guys had a problem like this... I installed a CISCO ASA5505 with 50 user license to my network as the gateway firewall. So ASA is acting as the gaeway router which is connected to a fibre circuit and also it gives DHCP to the network. The strange thing is that except for two computers rest does not have internet. I also have an asterisk phone system which works fine..
I tried everything.... static IP's DHCP, DNS nothing worked. But strange enough two computers works fine and have internet.. but are no special computers. One is Win XP and the other one is Win7. When I troubleshoot the problem in win 7 on one of the computers it says
"The remote device or resource won't accept the connection"
I have no idea now... any help would be great...
Thanks in advance

Hello Amal.
I hope the gateway of the comupters are configured as ASA.. Are you able to ping your gateway from the PC where you dont have access to internet and also check whether the translation is happening on ASA when you are trying to access the internet ( show xlate | i 'local ip'
It would be great if you could share the ASA config as well
regards
Harish.

The "Two Dots" for two springboards default?

Similar Messages

Maybe you are looking for