The type is too small

Trying to use Premiere Elements 12. The interface is too small to read. The drop down menus are fine, but the static words (as is the File Edit Timeline etc. headings) and numerals (timeline count) are, for all practical purposes, illegible. I'm displaying on a 25.5" HDMI tv and it's as bad as on my 13" Yoga. As is, the product is unusable. What can I do? Thank you.

i made monitor size adjustments, after checking around, I believe the problem is my high dpi monitor, 3200 x 1800. Apparently, Adobe products are known for not working well with high dpi monitors. That's why the drop downs work well while the workspace reads too small. Someone dropped the ball on this one by not anticipating devices like the Lenovo Yoga. Or, if they were aware of the issue, by not stamping it with a huge reflective sticker warning those of us who are playing the home filmmaker game to stay away. Very disappointed because I was happy with Premiere 10 and only wanted a little more processing power behind it. And I question the safety of running old software on a new machine.
Sent from Yahoo Mail on Android
From:"A.T. Romano" <[email protected]>
Date:Sat, Feb 28, 2015 at 2:40 PM
Subject:[Premiere Elements] The type is too small
The type is too small
created by A.T. Romano in Premiere Elements - View the full discussion
dukelemoyne
What is the computer operating system on which you have Premiere Elements 12/12.1? It is essentially it is what it is. There is no user control over interface adjustments that you are referring to. But, you can try looking at Control Panel Display for computer adjustment to see if that will do the improvement you seek.
Have you gone into Control Panel Display and looked at the "easier to read options"
Smaller 100% (default)
Medium 125%
Larger 150%
What is the native resolution of your computer monitor?
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7239304#7239304 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7239304#7239304
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

The font is too small

The entered font size in mm is not true. The font is too small. Am I doing something wrong?

Thomas,
If you need to have the font appearance at a specific size while maintaining fuilly editable Live Type, you may:
1) Tick Edit>Preferences>General>Use Preview Bounds;
2) Select the Type and Effect>Path>Outline Object;
3) Then set the desired size in the Transform palette.
That will reduce the Bounding Box to the actual bounds of the letters, and keep the Type editable.
Remember to untick Edit>Preferences>General>Use Preview Bounds before you get a reverse issue.

I can't delete partition in disk utility, it keeps telling me that "the changes are too small"

I previously split my disk into two different disks, however I want to combine them together again, yet i was unable to delete the second partition. I can't delete partition in disk utility, it keeps telling me that "the changes are too small"
Plz help!!!!!!

Make at least two complete backups of all your data. Boot from another drive and partition this one as desired. Restore the data.

To everyone who thinks the fonts are too small on ...

To everyone who thinks the fonts are too small on the N9 i suggest you contact Nokia about this issue. I know i am!

please see my post here: /t5/Maemo-and-MeeGo-Devices/N9-Font-too-small/m-p/1338481#M32968

The print is too small on various web sites that I open. How can I correct this?

The print is too small on various web sites that I open. This has never happened on older Firefox versions. How can I correct this so every page I open, the print size is consistent and legible? I don't want to change it every time I open a new site.

Hi Donna,
Welcome to the HP Community Forum.
Font Size and the scale (size) at which a document is printed is controlled within the application just before the job is sent to the printer - this means the size is set from your browser (Firefox, Internet Explorer) or perhaps your Editor (Word). Generally speaking, most applications use Print Preview -- or a variation of that program under a different name.
An explanation and the use of Print Preview is avialble in the following document:
Change Print Size with Print Preview
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

The fonts are too small on my imac desktop and web browsers. Where can I increase the size?

The fonts are too small on my imac desktop and web browsers. Where can I increase the size?

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

The subtitles are too small on ATV2

the subtitles are too small on ATV2, at the movies I rent, it is not possible to enjoy the movie and read the text at the same time, what makes Apple here???

I have the same problem, changing it to large in the Accessibility menu makes them too large and annoying. I hope Apple fixes this soon!

I have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!

I am about to buy the above products for home and a laptop I bought the high res laptop for editing photos and the photos look great on the display but I cannot use photo shop and lightroom
has any body had this problem and is there a simple fix that I have missed
taking the res down in the control panel reduces the res but does not effect the programme
by the way the dell xps is great
dave

Thanks for the info I know that there were problems with the high res
I am using the latest photoshop and bridge from the cloud but only using the trial copy at the
moment
I will look closer and try to scale it to a suitable level
thanks dave
Original message----
From : [email protected]
Date : 06/02/2015 - 00:39 (GMTST)
To : [email protected]
Subject : i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    created by gener7 in Photoshop General Discussion - View the full discussion
There is that pitfall in buying HiDpi laptops for Windows.
Only Photoshop CC 2014 has the option to scale the UI 200% in order to make it usable on these hires screens.
CC and earlier does not have this and Adobe would have to retrofit them. Not likely with older products.
Gene
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7167666#7167666 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7167666#7167666
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Is there a way to increase the size of the tool windows/fonts in InDesign. I am having trouble seeing the info (the font is too small)

Is there a way to increase the size of the font in the tool windows in InDesign? I am having trouble seeing the info (the font is too small)

Not possible. You'll need to go to your operating system and choose a screen resolution that displays the screen with larger pixels.
Or get a new prescription for your glasses (seriously!)

The print is too small.

The print is too small. I can't find anywhere to enlarge it. I've tried settings, but that just changes the density.

hi montadorwatt, when you go into the firefox menu, you'll find a zoom bar at the top which allows you to change the size of a website.

I have a 22 inch monitor set at 150% but since I installed Firefox, the font is too small and the screen is too small. Cannot make font or screen larger. I can do Control++ each time I enter a page but don't want that to be my solution.

In control panel/display, I had my display set at 150% and at 1680 X 1050 resolution. This filled my 22 inch screen with the page content. Now that I have installed Firefox, the font is too small and the content is centered in the screen leaving about3" per side of blank space. I want to fill the screen and make everything larger. Haven't found a way to do that. Firefox tells me in my control panel/display window that by setting my display at 150%, "some items may not fit in your screen if you choose this setting while your display is set to this resolution. It worked fine with Explorer.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

SQL Error: ORA-01873: the leading precision of the interval is too small

Hi,
My requirement is to get the current time stamp in Epoch time microsec format.
I am trying to execute the following query
select (CAST(((current_timestamp - TO_DATE('01/01/1970 00:00:00', 'MM-DD-YYYY HH24:MI:SS'))*24*60*60*1000000) AS varchar(32)) ) as "dt" from dual ;
i am receiving the following error
Error starting at line 1 in command:
select (CAST(((current_timestamp - TO_DATE('01/01/1970 00:00:00', 'MM-DD-YYYY HH24:MI:SS'))*24*60*60*1000000) AS varchar(32)) ) as "dt" from dual
Error report:
SQL Error: ORA-01873: the leading precision of the interval is too small
01873. 00000 - "the leading precision of the interval is too small"
*Cause:    The leading precision of the interval is too small to store the
specified interval.
*Action:   Increase the leading precision of the interval or specify an
interval with a smaller leading precision.
but if i tried to do
select (CAST(((sysdate - TO_DATE('01/01/1970 00:00:00', 'MM-DD-YYYY HH24:MI:SS'))*24*60*60*1000000) AS varchar(32)) ) as "dt" from dual ;
is working fine but i am getting the wrong epochtime as sysdate does not have the timezone information.
please help me how to make the first query work so that i can get the current_timestamp change it to gmt and convert it to Epoch time.
please let me know if there is any other way to get the Epochtime.

Depending if you want or not to include fraction of a second use:
with t as (
           select current_timestamp at time zone 'gmt' - to_timestamp_tz('01/01/1970 00:00:00 GMT','MM-DD-YYYY HH24:MI:SS TZR') interval_diff,
                   cast(current_timestamp at time zone 'gmt' as date) - to_date('01/01/1970 00:00:00', 'MM-DD-YYYY HH24:MI:SS') num_diff
             from dual
select cast(
                extract(day from interval_diff) * 24 + extract(hour from interval_diff)
               ) * 60 + extract(minute from interval_diff)
              ) * 60 + extract(second from interval_diff)
             ) * 1000000
             AS varchar(32)
            ) as "ts",
        cast(num_diff * 24 * 60 * 60 * 1000000 AS varchar(32)) as "dt"
from t
ts                   dt
1336237158093000     1336237158000000
SQL> SY.

We are exporting data to the SAP Business one. Error: "The field is too small to accept the data you attempt to add. try inserting or pasting less data"

Hi,
I have exported the data from two sources, MS-Excel and SAP Business One to Sap Business One (8.81). While exporting the data, I got the error "The field is too small to accept the data you attempt to add. try inserting or pasting less data" for the first time, Immediately when I run it again, it shows export successfully completed, but nothing is changed in the SAP Business One. Could you please provide the solution as early as possible?
Thanks & Regards,
Chaitanya.B

ok
i solve the problem.i rezise the colomn size
thanks

My husband's only way to communicate is with ipad. He now has double-vision. The icons are too small. Is Apple planning on accommodating us boomers and handicapped with a larger icons? Zooming doesn't help becuase of limited manual dexterity. Thanks

My husband's only way to communicate is with ipad. He now has double-vision. The icons are too small. Is Apple planning on accommodating us boomers and handicapped with a larger icons? Zooming doesn't help because it's not a permanent setting and he can't change it too meet his needs because of limited manual dexterity. I understand and appreciate the desire for consistency, couldn't they make a two or three size option setting. Small, Medium, Large and maybe Xlarge?

Thanks. Tried it. The size of icons is great but now the part of the screen is missing. For example, he likes going into his music app, yes, it was easier for him to see and select, but once in the app he couldn't see the sides, so he couldn't select song without a double-tap to get it out of zoom. I will see if I can arrange his pages so that all icons show. This is a sort of work around. Larger icons would be a better solution. My husbands illness makes him akin to a person with ALS, so his ipad is his prized possession.

The print is too small have it set as high as 24 to try to change it- not working!

Print is too small-changed several times and now up to 24- not changing!

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

The type is too small

Similar Messages

Maybe you are looking for