The unlock slide button will only slide less than half way and the ipod will not open.What can be done?

Slide unlock button is not working

This is either hardware or software if you held down the power and home button 10-20 seconds and restarted it with no progress I would try to connect to iTunes and factory factory reset it. If this doesn't work it's time to a talk to apple or a respectable repair agent or b pony up for the new one I hope this helps . P.s. I would mention your quantized theory but I believe it's one circuit it works or it doesn't no in between

Similar Messages

  • SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi,
    I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
    <Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
    to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
    I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
    "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
    I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
    renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
    Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
    error logging. So we created another project in Visual Studio called:
    <Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
    And this is when the error has come back and bitten me! The scenario is now as follows:
    1. project1 packages and deploys successfully with long feature names and deep paths.
    2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
    I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
    1. By doing the following I can get project2 to package
    In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
    Clean the solution
    Shut down Visual Studio 2010
    Open Visual Studio 2010
    Rebuild the solution
    Package the project2
    et voila the package is generated!
    This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
    no longer be hanging onto something.
    Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
    solutions on a Build Server using automated builds.
    2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
    3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
    does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
    4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
    from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
    5. DebugView shows nothing useful during the build and packaging of the project.
    6. The error seems to occur in
    CreateSharePointProjectService target called at line 365 of
    Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
    project2 completely and recreate it and introduce it into my Visual Studio solution.
    Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
    Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
    project etc... and is actually workable in a meaningful Visual Studio solution.

    Hi
    Yes, I thought I had fixed this my moving my solution from the usual documents  to
    c:\v2010\projectsOverflow\DetailedProjectTimeline
    This builds ok, but when I come to package I get the lovely error:
    Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
    Now, the error seems to be related to 
    Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
    <metaData>
    <type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
    <importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
    </metaData>
    <data>
    <properties>
    <property name="Title" type="string">VisualProjectTimelineWebPart</property>
    <property name="Description" type="string">My Visual WebPart</property>
    </properties>
    </data>
    </webPart>
    </webParts>
    .... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
    Daniel

  • Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi, Im trying to get the whole path in my server, so i tried that with this following code
    Get-ChildItem $sourceFolder  -Recurse | ?{$_.PsIsContainer} |Get-Acl
    But then, it showed me somtehing like this :
    Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
     I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
    but all of the trick just dont work
    is there any way to solve this problem? thanks

    There is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
    If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
    If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
    will be relative to that psdrive and not to what is specified as the $sourcefolder.
    unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
    output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
    Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

  • The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    I've followed
    this blog post, but it didn't work for me. I truly don't want to change my solution path as this is not acceptable. What else can I do?
    I can't believe we still have limits on path length.

    Note that the solution described in the blog post does not change your solution path. The _CSRUN_STATE_DIRECTORY environment variable sets the location of the temporary folders used by the compute emulator. Your solution does not need to move.
    Though, you may still have problems related to path length inside your solution. To resolve these, I have sometimes used symbolic links (using MKLINK /D link target) or substed drives (SUBST X: path) to create shorter paths and then opened the
    solution from there. If I recall correctly, with the first method, you need to be careful how you navigate to the solution in the Open Project dialog. I think that if you browsed to the path, it would still use the long path, so you need to paste the short
    path into the file name text box to go directly to the location of your .sln file. I may be misremembering the details though.
    BTW, I can't believe we still have limits on path length either.

  • After upgrading to Mountain Lion today, my battery only lasts less than 1:30 and the fans seem to run constantly. Help?

    I have a late 2011 13" MBP with a 2.8 GHz i7 processor and 4GB of RAM. With OSX 10.7, my battery could last over 4:30; however, now I see the battery drop a percentage point about every minute (currently at 81% and it says 1:16 remaining). I have a number of programs open (Chrome, Mail, iTunes, Twitter, Skype), but these are the same programs I almost always had running with Lion and I never had this problem. Something else new is that the fan seems to constantly be running and only turns off if I put the computer to sleep.
    Here are screenshots of my activity monitor: http://imgur.com/a/shehM
    Any advice?
    My battery has decreased to 70% (1:07 remaining) by the time I've finished writing this...

    It looks like Skype is basically running two CPU cores at nearly full throttle (well, 1.57 cores).  That's bound to drain the battery pretty quickly.  If you were not doing a high resolution video chat in Skype when you took that screen shot, then something is very wrong with it.  Check and see if there's a newer version of Skype available that fixes the problem.

  • Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid %50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac??

    Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid $50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac?? Also, apple says there is nothing they can/wil do even though i got the apple care....i mean really? $50.00 for 2002 computer with windows XP and 512mb of ram and a single core processor......faster and more usable than $1400.00 computer with 4gb of ram and dual core processor.....***???

    Willtc92 wrote:
    Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid $50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac??
    obviously not.
    Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...
    Give examples of how it is slow.

  • TS3274 I have an iPad 1 and cannot get the Apps to complete the updates. I have deleted my account, reset the iPad, signed back into my account, synced with my Airbook and they still won't update. what can I try next? Thank you

    I have an iPad 1 and cannot get the Apps to complete their updates. I have deleted my account, reset the iPad, signed back into my account, synced with my Airbook and they still won't update. what can I try next? Thank you

    Look and see if you have a stalled download in iTunes - it could be a song or a podcast - if there is something that has not completed in there, your app updates will not download. Finish those downloads first, if you have any.
    Check to make sure.

  • I´m trying to open a presentation created  oct 2013 and asks me to update my KN version, but the latest is already instaled, and is not opening, what can I do?

    I´m trying to open a presentation created  oct 2013 and asks me to update my KN version, but the latest is already instaled, and is not opening, what can I do?

    Put Keynote application in the trash, then install again from the Mac App Store fixes this.

  • When I try to open my AI CS6 "missing required plugins" and "PDF Format.aip" comes up I click ok and the application stops. Not opening What can I do?

    When I try to open my AI CS6 "missing required plugins" and "PDF Format.aip" comes up I click ok and the application stops. Not opening What can I do?

    Matilda,
    You may need to reinstall, using the full three step way:
    Uninstall, run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    I found a fix for it, It turned out that the file that lists all of the songs on it got corrupt. I had to use 3rd party programs but it did work out in the end
    Here is a link to where I found the fix: https://discussions.apple.com/thread/3631590?start=0&tstart=0
    I followed the instructions of Geekdad3 a little bit lower on the page.
    Good luck for anyone else who has this problem

  • The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

    The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

    Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

  • Will only load my stuff half way

    my stuff will start downloading then it stops when it gets to the second song,and tells me that i tunes had an error and needs to shut down immediantly. what do i do????

    could you describe your stuff?
    Is this an iTunes installation problem, or an iTunes music store problem?
    Are you on the right forum board?

  • HT201210 i downloaded ios6 on my iPhone 4s and the passbook app will not open. what can i do?

    I downloaded IOS 6 on my iphone and the passbook app does not open. Any help?

    hold down the power and home button together for 15 seconds then turn it back on and try again

  • In normal view, half the page disappears off right of screen. in full screen this does not happen. what can be done to correct the screen ratio for normal screen?

    version 5 loaded on windows 7. all went well for a while. one day while using, ratio of normal screen doubled in width; i.e. half the page disappears off the screen to the right (on a wide screen). when full screen mode applied, ratio is fine. it only happens in normal view, which is the usually prefered option. I cannot determine any means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal view. not that when program is opened from keyboard the page is correct for a moment, then enlarges the width with 1/2 page dissappearing.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • My computer starts, bar completes half way and the system shuts down. Dont know what happened.

    Starting abnormally, Like when I start my MacBook pro which is almost new. A bar runs on the white screen and then when it reached half way system shut down. Can anyone help. Any way to reset my computer.
    Also, when I am going to option, the system doesn't allow me by saying hard disk is locked. Kindly help out

    OS X- Gray progress bar appears under Apple logo during startup
    I suggest you need to erase your drive and reinstall OS X. Be prepared for the possibility that your hard drive has failed.
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

Maybe you are looking for